You must be logged in and verified to contact the designer.
With this Kit you are able to mount your LiPo Battery without any tape to your WRC STX 1.5 chassis.
The idea is well known from Awesomatix Cars.
It fits LiPos, which are higher than 22.5 mm. If you use a lower one you can just cut it down with a hobby knife or a dremel.
The parts come in a frame as you can see in the pictures below.
You just have to cut the small bridges with a hobby knife and then your ready to go.
As you can see on the picture you use the original carbon edge from your WRC kit.
Everything you need is:
6x standard M3 Nuts
4x countersunk screws M3x12
2x lens head screws M3x20 or longer (depends on your Battery heigth)
and some spacers to fit your battery