You must be logged in and verified to contact the designer.
Product Description
If you've been snapping axles, want extra weight down low, or just as rigid of an axle as possible this is what you need. Similar to our 4 Link with SOA adapter this hugs the top of the axle, with a small gap, but ties into the front of the diff and the shock mounts. Basically creating one solid link between the center and ends of the axle. It all but eliminates axle flex in the stock axles.
You'll need to replace the shock and panhard ballstuds with a regular ball and screw combination. You'll also need some M2x12mm (10mm will do too but 12 better) for the center diff mount.
If you have big fingers and are clumsy like me it can take a minute of finaglin the shocks and screws into place.
This piece fits the stock Gen 8 / Gen7 Conversion / PACK axles fine. Not intended for the HD/Axe axles. We'll hve versions for that soon.
Shapeways states a +/- 5% tolerance so some minor sanding may be necessary. We've done a lot of metal parts and shapeways usually nails the dimensions. The 20 day lead time is usually about 2x what it takes. In all of our orders we've only had one take longer than 10 days from order to ship.
We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers: