Click and drag to rotate

Not a Photo

1/700 MK10 Terrier Missile Launcher KIT x4

Print With Shapeways
Choose Your Material
Choose your color and finish

Have a question about this product?

contact the designer
You must be logged in and verified to contact the designer.
Product Description
Very High Detailed and accurate 1/700 scale MK10 GMS Guided Missile Launching System for US Navy ships. 

Twin-arm launcher for the RIM-2 Terrier or RIM-67 Standard missile. Employed below main deck magazines. Used on Belknap class cruisers and other Terrier ships. Some launchers are modified to store and launch the RUR-5 ASROC.

Included parts:
1. MK  Launcher
2. Pedestal to raise the Mk10 to be in line with the forward missile house
3. Big Missile Ejector go to forward part of the ship
4. Small Missile Ejector go on aft (that's if your ship has 2 Mk10's)

Used for:
RIM-2 Terrier
RIM-67 Standard Missile SM-1/2ER

Used on:
Belknap class CG
Leahy class CG
Farragut (Coontz) class DDG
USS Reeves (CG 24)
USS Fox (CG 33)
USS Worden (CG 18)
USS England (CG 22)
USS Sterett (CG 31)
USS Josephus Daniels (CG 27)
USS King (DDG 41)
USS Harry E. Yarnell (CG 17)
USS Dewey (DDG 45)
Real scaled from original
Hollowed to saved material
Model unpainted
Set x4

If you need a different size or a custom part designed just for you? 
Please send me a PM.

Some part cleanup will be necessary.  The 3D printing process uses a waxy substance to support certain part features.  Although the parts are cleaned by Shapeways, some waxy residue may remain.  It can be safely removed with water and a mild aqueous detergent like "Simple Green" using an old, soft toothbrush, Q-tips or pipe cleaners.  Customers report that "Bestine" and "Goo Gone" also work well.

During the printing process, liquid resin is cured by ultraviolet light.  Microscopic bits of resin may remain uncured.  Let your parts sit in direct sunlight for a few hours to fully cure the resin.  

Water-based acrylic paints meant for plastics is strongly recommended.  Other paints, especially enamels, may not cure on Frosted Detail 3D-printed plastics.
What's in the box:
1/700 MK10 Terrier Missile Launcher KIT x4
3.25 x 1.59 x 0.78 cm
Switch to inches
1.28 x 0.63 x 0.31 inches
Switch to cm
Success Rate:
First To try.
What's this?
Mature audiences only.


We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers:

Click anywhere outside this window to continue.