1/87th 36 foot material conveyor

This conveyor scales out at 36 feet long, with a 12 degree angle when upright, which gives a seven foot clearance on the end. It is of the rigid type, that does not raise and lower with hydraulics. This type would be typically used for unloading of a gravel crusher trailer and directing the load into the main radial stacker conveyor, or on a small farm, grain operation, or the like. The piece is ready to prep and paint the motor over and wheels separately added after painting, and the belt is installed. The piece is 36" wide, so a 30 inch belt is appropriate, and added by the buyer using vinyl tape, electrical tape, black strips of sandpaper etc.  It is offered in the frosted ultra detail material only. Should you have any problems, contact me via the designer link or via email to modelmechanic@gmail.com  NOTE: The cage surrounding the conveyor is simply to help avoid damage in shipping, hold all the parts together in one piece, and should be removed carefully during the prep process.