Windmill 3 - Windmill 5-BotRud 2-Grip

3D object „Windmill 3 - Windmill 5-BotRud 2-Grip“
Created by Gert Rieger 2018.

This is a specially designed part for my Windmill project.
The part is meant to be 3D printed, e.g. in the „Strong & Flexible“ plastic material by Shapeways.com.

Montage:

- Slide a 10 mm wide, 1 mm thick plastic pipe on the two fingers.
  They will get bent inwards, thereby putting some pressure on the inside wall of the pipe.
  You can increase that pressure by putting one or more strips of cardboard or paper in the gap between the fingers.
  (Be careful; the pipe may crack if you overdo it.)
  You may want to secure the pipe with a hose clamp, but for some purposes you may not even need that.

- Insert 6 mm board (e.g. balsa wood) between the two jaws.
  Fix with 3 screws (3.0 by 16 mm). These screws will slide through the bigger holes
  on the one side and catch on the smaller holes on the other side.

Designed in onshape.com (they offer both free and paid accounts).