Main Plate - Dji Mavic Tablet Holder Adaptor

DJI Mavic - Tablet holder adaptor

This is the main plate of the dji mavic tablet holder adaptor.

you will also need the centre piece which you can find here:

https://www.shapeways.com/product/AC5A7YS29/centre-piece-dji-mavic-tablet-holder-adaptor-by-gi?optionId=60959957

This holder does not include the DJI stock tablet holder that you see in the video and pictures, but only the 3d printed parts!! 
you will have to either purchase it separately or use your old one if you have any.

you will also need:

4x 2.5mm screws / 10mm long

4x 2.5mm nuts

IF YOU DONT HAVE THOSE SCREWS SYOU CAN GLUE BOTH PARTS!

(in this case, makse sure you use a strong glue that you trust)

The center nut for the tripod is a 1/4INCH nut.

you can also get the complete FDM 3d printed set on our website:

http://www.Gimbal-Guard.com

here's where you can buy the DJI tablet holder:
https://www.aliexpress.com/item/Tablet-Phone-Mobile-Device-Extended-Holder-Clamp-Metal-Bracket-for-DJI-Phantom-4-3-Inspire-1/32735915225.html?spm=2114.01010208.8.92.v3ysjK
 
Thank you for watching!
Please subscribe, share, like, comment and don't forget to visit our website at:
http://www.Gimbal-Guard.com