This is the cycklops doll in the larger size. a 1/6th fasion doll scale. she is approx 28cm tall or little under 11 inches. She is fully articulated with double joints for knees and elbos and a middle torso joint..
- feet= 19mm wide, 47mm long.
- Eyes= 12mm
- Head Circumference 10.5 CM (wig size 4-4.5")
- chest= 15cm
- hips= 16cm
- waist= 11cm
- leg length= 13cm
- Torso length= 9cm
- Thigh Circumference=9cm
- ankle circumference=5.2cm
This is a DIY project,Only the 3D printed doll parts come with this. Other items liek eyes, wig, cord, magnets etc, must be purchased seperatly or supplied by you. Supplies needed are "S" hooks, magnets, elastic cord, super glue, and possible a craft knife and scissors. The "S" hooks (2 tiny ones for hands, 2 medium for feet, and one large for the head, all s hooks are typically smaller then most found in BJD though. If you don't want to mess with it, you don't have to have the "S" hooks, you can wrap cored directly over the bars instead of the hook, but you will need a large jump ring or hook for inside the head,)
You will also need 4 disc mangets for the head cap. Use super glue to glue your magnets in. Magnet size you will need is. 4-5 mm in diameter and 2-3mm tall or thick. The print shrinkage varies a little so if the magnet well is a little small, use a craft blade to carefully shave the walls to make it wide enough for your magnet or use a dremel to widen.
The last thing you will need is 2mm elastic cord with strong tension to string your doll. 3mm might work for the legs and torso, but likley 2mm is the biggest or possible 1mm for the arms.