You must be logged in and verified to contact the designer.
Product Description
This item will fit inside the RIGHT stock rear bumper and allow for rear frame mounting for CMAX on the hardbody XJ Jeep Cherokee. Please clean out all holes with 3/32" or 2.5mm drill. The inner 2 holes are designed to match CMAX rear frame spacing, and should have M3x8 setscrews installed in the 2 holes... leaving only 1.5mm of the set screw showing out of the hole. This will let you pinch the rear CMAX frame to clip inside these mounts and then be located by the 2 setscrews. This mount is designed to be glued into the cavity of the rear XJ Jeep Cherokee bumper. You can use this part if you want to have the rear tailgate open on the Jeep. Not for use with our item called CMAX XJ Rear Wall Body Mount.
Must be used with CMAX+XJ Rear Body Mount Left.
We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers: