CB Umbra Eagles Searchlight LED S* 28mm

[Umbra Eagles pattern]
Vehicle Searchlight LED for 28mm scale vehicles.

Contains:
8x Searchlights
(S* = Sprue)
*Updated model, now with 8 pieces instead of 10. After suggestions from buyers)

Description
The Umbra Eagles pattern Searchlight XT-1 LED illumination beam "Illuminator 3000" share many features, such as virtually indestructible high-efficiency LED emitters, 6000 lumens of maximum output, precision reflectors, and sleek Ceramite bodies. The Searchlight XT-1 is ideal for nightops, border security, and maritime applications, or any mission where an ultra-bright, white-light searchlight is vital.
(Changing gamerules or stats is up to users)(Does not actually improve your dice rolls while trying to hit target)(not actually a led light)(Not actually LED)(Above description text is just fiction)

___________________________________________
Cleaning Information Steps
Parts might need to be cleaned extra when printed in Extreme quality frosted material.
1. Check for damage
2. Remove excess WAX residue from production process
with simple green and a soft brush with warm water.
3. Put the 3d printed product in sunlight to harden/cure for 2-3 hours.
Make sure its not too hot or the resin, or it might deform due to heat. under 30 degrees is fine.
4. Or check out in case of any issues: https://www.shapeways.com/blog/archives/22021-tips-n-tricks-for-painting-miniatures.html

Painting Information

• Use water-based acrylic paints meant for miniature plastics is highly recommended.
• Other paints, especially enamels, may not cure if applied DIRECTLY on Frosted Detail 3D-printed plastics.

(But if it has a base coat it works fine.)

• Use dedicated model sprue cutters to remove parts to minimize the risk of damage to the parts.

  
DISCLAIMER:

• This web store is completely unofficial, and its contents are in no way endorsed, or affiliated with Games Workshop.
• Not meant for children 14 years or younger
• These custom designed conversion components will arrive unpainted.