1/56 Scale Royal Navy V and W Class 9ft Type F.Q.2 Rangefinder on M.Q.1 Mount with extra base for V and W Class Destroyers. These are highly detailed parts created using the plans from the Dreadnough Project website. Also available is the Director for V and W Class Destroyers: http://shpws.me/R7Md
Some part cleanup will be necessary. The 3D printing process uses a waxy substance to support certain part features during the printing process. Although the parts are cleaned by Shapeways, some waxy residue may remain. It can be safely removed with water and a mild aqueous detergent like "Simple Green" using an old, soft toothbrush, Q-tips or pipe cleaners. During the printing process, liquid resin is cured by ultraviolet light. Microscopic bits of resin may remain uncured.
- Operators Chair, Training and Elevation Wheels, detailed Sights, Compass, Operators Armrest, Rivets and Hexnuts, Correcting Spheres, Operators Ladders
- Part comes in 2 parts to minimise Wax Support contact
Let your parts sit in direct sunlight for a few hours to fully cure the resin.
Water-based acrylic paints meant for plastics is strongly recommended.
Other paints, especially enamels, may not cure on Frosted Detail 3D-printed plastics.
Use dedicated model sprue cutters to remove parts to minimise the risk of damage to parts.
Please take a look at my other items.
Painting tips and preparation