Click and drag to rotate
Real Steel SCUBA Trident 1 3d printed

Not a Photo

White Natural Versatile Plastic
Real Steel SCUBA Trident 1 3d printed
Real Steel SCUBA Trident 1 3d printed

Not a Photo

Real Steel SCUBA Trident 1

Print With Shapeways
Choose Your Material
Choose your color and finish

Have a question about this product?

contact the designer
You must be logged in and verified to contact the designer.
Product Description
Mount this trident spearhead, and use it as SCUBA self defense. Alpha and Omega Industries!

This trident spearhead is exactly the same as the 2nd and 3rd model, except that this model is plain with no crossguard or other features on the neck.

The same as an historical Viking spear, according to weapon construction laws in norway at the time, the spearhead is fitted perfectly to match the inner cone in the socket (a bit thicker on the pole than the inner cone for tightness), it is Jammed in tight, then drilled through and pinned with a single rivet, nail, or pin which goes all the way through the shaft.

The hole for this pin is 3/16 inch diameter, a commonly available size.
Do not use a screw. Screws will cut into the shaft and the head, it weakens the item. Use a 3/6 nail and then cut to length and hammer it over the end like a rivet. 3/16 inch rivets can be used. Beware corrosion and galvanism. 
SCUBA Trident
What's in the box:
trident 1
11.94 x 2.58 x 27.18 cm
Switch to inches
4.7 x 1.01 x 10.7 inches
Switch to cm
Success Rate:
First To try.
What's this?
Mature audiences only.


We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers:

Click anywhere outside this window to continue.