Click and drag to rotate
Vaterra Ascender RULR - LWB or SWB 3d printed

Not a Photo

Black Natural Versatile Plastic
Vaterra Ascender RULR - LWB or SWB 3d printed
Vaterra Ascender RULR - LWB or SWB 3d printed

Not a Photo

Vaterra Ascender RULR - LWB or SWB

Made by
Ships as soon as 10 days
3D printed in black nylon plastic with a matte finish and slight grainy feel.

Have a question about this product?

contact the designer
You must be logged in and verified to contact the designer.
Product Description
Upgrade the suspension on your Ascender by adding this simple link riser. Reduce torque twist and be able to climb steeper hills than before.
  • Improves performance on uphill climbs - typically 2+ degrees better.
  • Reduce Torque Twist.
  • Works with all 4 wheelbase configurations for the stock Ascender Chassis and skid, no modifications necessary!
    • For Short Wheelbase (WB1 or WB2) use the RULR's without the included adapters
    • For Long Wheelbase (WB3 or WB4) use the RULR's with the included adapters
  • Increases pinion angle using stock links (Adjusting the rear upper link with the kit's included spacers will allow you to easily customize the pinion angle.)
  • Keys into chassis to prevent rotation
  • Extremely easy to install, requiring no drilling and minimal effort.

Note: The part comes on a part tree, and each piece will need to be removed from the tree. This may leave a white dot where the tree connected to the part.
What's in the box:
Vaterra Ascender RULR
3.7 x 3.86 x 0.7 cm
Switch to inches
1.46 x 1.52 x 0.28 inches
Switch to cm
Success Rate:
First To try.
What's this?
Mature audiences only.


We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers:

Click anywhere outside this window to continue.