Click and drag to rotate

Not a Photo

009 or HOn30 sugar cane truck

Made by
Print With Shapeways
Choose Your Material
Choose your color and finish

Have a question about this product?

contact the designer
You must be logged in and verified to contact the designer.
Product Description
This part allows you to create an HOn30 (or H0e) wholestick cane truck.

These additional items are required:
  • Roco 34607 or similar 4 wheel trucks from Roco, EggerBahn, Minitrains or BCH
  • Bachmann Short Shank Dummy Knuckle Couplers (N 42532)
  • Square 1×1 mm brass or styrene for the vertical corner posts

Just take the following steps to build the wholestick cane truck.

  1. Once you receive the printed part from Shapeways, ensure to clean it thoroughly. 
  2. Cut the 4 corner posts from square 1×1 mm styrene. The length of these posts is about 14 mm.
  3. The corner posts will fit in the holes in the corners of the printed part. Attache them with super glue.
  4. Apply your preferred primer.
  5. Remove 2 Bachmann knuckle couplers from the sprue and insert them in the pockets on the underside of the printed part. You will probably have to sand them at the back a bit for a good fit.
  6. Remove most of the parts from the 4 wheel truck, including the inner “cross” and the metal parts of the original couplers. All that needs to remain are the wheels, axles and the outside part of the chassis.
  7. If required, remove the small coupler hooks from the chassis by cutting them off.
  8. Slide the printed part (with corner posts and couplers) over the chassis. It is a snug fit and no glue should be required.
More information can be found at:
What's in the box:
009 or HOn30 sugar cane truck
3.2 x 2.3 x 0.37 cm
Switch to inches
1.26 x 0.91 x 0.14 inches
Switch to cm
Success Rate:
First To try.
What's this?
Mature audiences only.


We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers:

Click anywhere outside this window to continue.