Replacement neck plate + new swivel hinge for Transformers Titans Return Legends Bumblebee. Allows for 180 deg rotation of shoulders during transformation resulting in having the bicep windows face backwards.
You will need a depinning tool to remove the pins from the original plate hinge and shoulders, and a razor saw / blade to trim out 2 small sections on the main torso section. NB popping off the original head can be rather tough and in order not to crack the splayed peg halves, I would recommend using a hair dryer to warm up the surround neck plate before prying the head off.
In the photos, I have also cut off his hands, swapped them round and reglued them to the forearms so that his fists are the correct way round. Sorry I can not solve this any other way at the moment.
So unless you are willing and capable of doing some physical customisation mods, please do NOT purchase these parts, as I will NOT be held resonsible for any accident resulting in a ruined figure. You do so at your own risk.
This has been tried and tested in the white polished material with zero issues. However it should be noted that the coloured polished materials may require additional finishing like extra sanding etc as I have found the dye processed materials, especially when it comes to the actual swivel hinge, have an overly tight fit and may cause the swivel peg to pop out when rotated. I will also recommend using a 1.5mm drill bit to clean out all the pin holes thoroughly of any left over print material.