Click and drag to rotate
(X1) Pitch Control Lever 3d printed (X1) Pitch Control Lever installed on transmitter

DIGITAL PREVIEW
Not a Photo

(X1) Pitch Control Lever installed on transmitter
(X1) Pitch Control Lever 3d printed (X1) Pitch Control Lever installed on transmitter
(X1) Pitch Control Lever 3d printed (X1) Pitch Control Lever installed on transmitter

DIGITAL PREVIEW
Not a Photo

(X1) Pitch Control Lever 3d printed (X1) Pitch Control Lever installed on transmitter
(X1) Pitch Control Lever 3d printed (X1) Pitch Control Lever installed on transmitter

DIGITAL PREVIEW
Not a Photo

(X1) Pitch Control Lever 3d printed (X1) Pitch Control Lever installed on transmitter
(X1) Pitch Control Lever 3d printed (X1) Pitch Control Lever installed on transmitter

DIGITAL PREVIEW
Not a Photo

(X1) Pitch Control Lever 3d printed (X1) Pitch Control Lever impression
(X1) Pitch Control Lever 3d printed (X1) Pitch Control Lever impression

DIGITAL PREVIEW
Not a Photo

(X1) Pitch Control Lever 3d printed (X1) Pitch Control Lever colors (coral red, white, royal blue) impression
(X1) Pitch Control Lever 3d printed (X1) Pitch Control Lever colors (coral red, white, royal blue) impression

DIGITAL PREVIEW
Not a Photo

(X1) Pitch Control Lever 3d printed (X1) Pitch Control Lever overview
(X1) Pitch Control Lever 3d printed (X1) Pitch Control Lever overview

DIGITAL PREVIEW
Not a Photo

(X1) Pitch Control Lever 3d printed (X1) Pitch Control Lever overview
(X1) Pitch Control Lever 3d printed (X1) Pitch Control Lever overview

DIGITAL PREVIEW
Not a Photo

(X1) Pitch Control Lever 3d printed (X1) Pitch Control Lever overview
(X1) Pitch Control Lever 3d printed (X1) Pitch Control Lever overview

DIGITAL PREVIEW
Not a Photo

(X1) Pitch Control Lever 3d printed (X1) Pitch Control Lever Section view
(X1) Pitch Control Lever 3d printed (X1) Pitch Control Lever Section view

DIGITAL PREVIEW
Not a Photo

(X1) Pitch Control Lever 3d printed
(X1) Pitch Control Lever 3d printed

DIGITAL PREVIEW
Not a Photo

(X1) Pitch Control Lever

Made by
Print With Shapeways
Choose Your Material
$10.35
Choose your color and finish
QTY

Have a question about this product?

contact the designer
You must be logged in and verified to contact the designer.
Product Description
DJI Phantom transmitter Pitch Control Lever.

The DJI Phantom transmitter is equipped with a (hidden) seventh channel add the back of your transmitter that you can use to control your pitch (X1) position of your camera gimbal.

With this simple Pitch Control lever you can easily adjust your pitch position while flying with your Phantom. The control lever is attached add the back of your phantom transmitter with thin double sided tape (I recommend 0,15mm double sided tape from Tesa or 3M).

Main product Features:
  • One piece design
  • Turn stoppers (against potentiometer stress and wear and tear when turning to far)
  • Easy installation
  • Is made of the material Strong and Flexible (available in six colors)

    • !See video and photos above for an impression and building instructions.
      (See also this video from Arthur's Channel)

    Package contents includes:
  • 1 - 3D printed Pitch Control lever (In the color you ordered)

  • Not included but required:
  • Thin double sided tape (I recommend 0,15mm double sided tape from Tesa or 3M)

  • Additional comments:
    • If you decide to go for the color white, than keep in mind that this color can become discolored over time (sun, dirt, touch etc.).
    • Because of the not constant 3d printing margins with this material it is possible that you have to remove some material from the axis / shaft with some fine grain sandpaper to make it fit.
    • By removing some material from the axis / shaft you can also determine the resistance of the lever, in other words how easy or not easy the lever can rotate to your own desired preference.

    In some cases, the potentiometer in the transmitter is not well-soldered and is skewed or not straight installed in the middle of the transmitter shell X1 hole. In those cases the (X1) pitch control lever will not fit (properly). You can solve this by re-soldering / bend the potentiometer, this is at your own risk! Before purchasing this upgrade please check if the potentiometer is properly centered / aligned (with a flashlight) in de transmitter shell X1 hole.


    If you have any comments or questions please leave a comment below.
    And if you like this product please leave a Star-rating (at the top of this page) or a comment (at the bottom of the page).

    Thanks and have Fun flying your Phantom!!
    Details
    What's in the box:
    (X1) Pitch Control Lever
    Dimensions:
    1.8 x 3.22 x 2 cm
    Switch to inches
    0.71 x 1.27 x 0.79 inches
    Switch to cm
    Success Rate:
    First To try.
    What's this?
    Rating:
    Mature audiences only.
    Logo

    Hello.

    We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers:

    Click anywhere outside this window to continue.