Tile Swap Puzzle - Assembly Instructions

Discussion in 'Tips and How-tos' started by eriban, Aug 3, 2013.

  1. eriban
    eriban New Member
    Here are the assembly instructions of the Tile Swap Puzzle that is available in my shop.

    It consists of ten steps, so the instructions are spread over two posts.

    Step-01.JPG

    Step 1 - Insert twist discs into back plate

    Step-02.JPG

    Step 2 - Insert horizontal swap discs

    Step-03.JPG

    Step 3 - Place edge cover

    Step-04.JPG

    Step 4 - Place interior covers

    Step-05.JPG

    Step 5 - Insert tiles

    Continued in next post
     
  2. eriban
    eriban New Member
    Continued from previous post

    Step 5 - Insert tiles

    Step-06.JPG

    Step 6 - Turn puzzle and remove back plate

    Step-07.JPG

    Step 7 - Insert remaining swap disks

    Step-08.JPG

    Step 8 - Put back plate back in place

    Step-09.JPG

    Step 9 - Fasten back plate to covers.
    Screw size: Diameter 2.9mm, Length 6mm

    Step-10.JPG

    Done!
     
  3. eriban
    eriban New Member
    Here is also a PDF with the instructions, which you can download and print.
     

    Attached Files: