sozzap23

3D modeler, Designer, Artist

83
Followers
6
Following
sozzap23's
1/400 Gundam M61A5 Semovente +PE x10
sozzap23 Hi there Tank Santa: http://shpws.me/OR74
1/600 Scale Prinz Eugen Turrets as seen in 1941, highly detailed set with adjustable barrels, coming soon in most other scales and other variations. Check them out here! - http://shpws.me/ONR9 1/600 Prinz Eugen 20.3cm/60 (8") SK C/34 Guns 1941
1/570 HMS King George V 14" Turrets 1942
sozzap23 @donmuertoHi there, no worries I can do that for you :-)
HMS Nelson 6" MK XXII Secondary Guns now available in most scales, HMS Rodney set available soon (slightly different Sighting Port covers). Check them out here! - http://shpws.me/OKV2 1/600 HMS Nelson 6" MKXXII Guns x6
Highly detailed 1/350 Scale SMS Emden 10.5cm/40 SK L/40 Guns for the Revell 1/350 SMS Emden or SMS Dresden kits. Check them out here! - http://shpws.me/OIIU 1/350 SMS Emden 10.5cm/40 SK L/40 Guns
Highly detailed 1/350 Royal Navy 50ft Lower Boat Booms, available soon in all larger scales (over 1/350 Scale) and for RN Cruisers and Destroyers, check them out here! - http://shpws.me/OHL2 1/350 RN Battleship 50ft Lower Boat Booms x4
DKM Graf Spee (Panzerschiffes) Turrets, now available in all scales. Check them out here! - http://shpws.me/OH35 1/350 DKM Graf Spee Turrets 28cm/52 (11") SK C/28
1/350 Scale DKM Scharnhorst Turret set now available. All years and scales covered, specific DKM Gneisenau sets available too (coming soon slightly different DKM Graf Spee set). Check them out here! - http://shpws.me/OGYX 1/350 DKM Scharnhorst Turrets 28cm (11") 1943
1/200 Scale HMS Hood Capstan and Bower set, coming soon in other scales and for other RN Ships. Check them out here! - http://shpws.me/OyTP 1/200 HMS Hood Capstan and Bower Set
1/350 Scale 4" QF Mark V Guns x4 (MkIII or MKIII*). Highly detailed replacement parts, ideal for a wide range of WW2 Royal Navy ships including early HMS Hood. Coming soon in most other scales, check them out here! - http://shpws.me/OxhN 1/350 RN 4"/45 (10.2 cm) QF MKV MKIII x4
1/350 scale Royal Navy WW1/WW2 Watertight Deck Hatches with Blast Plates (assorted sizes and types) x60. Other variations coming soon. Check them out here! - http://shpws.me/Ovtl 1/350 Royal Navy Assorted Hatches with Blast Plate
Royal Navy WW1 Water tight doors now available in scales 1/350 and larger (1/200, 1/144, 1/96, 1/72), check them out here! - http://shpws.me/Ov3e 1/350 WW1 Royal Navy Water Tight Doors x60
WW2 Royal Navy Water Tight Doors available in most scales (1/350, 1/200, 1/144, 1/96, 1/72). Highly detailed door set modeled from the Norman Ough plans. Details include the distinctive four recesses, hinges, rubber seal and locking clips, no more bland photo etch doors pinging around the workshop! - http://shpws.me/OtvV 1/144 WW2 Royal Navy Water Tight Doors x24
1/600 Scale HMS Hood 5.5" MKI Guns x12 on CPII Mounts, highly detailed parts ideal for the airfix HMS Hood kit. Also available in 1/200, 1/350 and 1/700 scales! - http://shpws.me/Ot6u 1/600 HMS Hood 5.5" MKI Guns Ports Open x12
1/350 Scale HMS Hood 5.5" MKI Guns x12 on CPII Mounts, highly detailed parts ideal for anyone wishing to back date the Trumpeter HMS Hood. Also available in 1/200, 1/600 and 1/700 scales! - http://shpws.me/Ot2s 1/350 HMS Hood 5.5" MKI Gun Only x12
1/600 HMS Ajax Funnel/Searchlight Platform Upgrade
sozzap23 Awesome, my email address is: sozzap@mac.com
sozzap23 Yep, I know the model like the back of my hand. I've used this for reference too. His work is lovely. It's a shame in this case the base model isn't the best. As you can see the turrets are completely wrong which is a shame. It's still a lovely model though, also it's actually 1942 camo (Med) on a pre 1941 ship. So you'll have to decide which way you want to go! :-) I've got the profile Morskie 1942 Ajax I can 'share' with you ;-)
sozzap23 Agreed, you'll just have to let me know what time period you're after. I'm going to redo my Leander bridge anyway so that it's easier for me to do conversion sets in the future. I know there's a lot of Aussies out there that would love a decent Perth or Sydney kit!
sozzap23 Hi Miguel, I know the article! I must have looked at it a hundred times for reference!
sozzap23 I meant to say the ISW bridge is molded onto the hull piece...
sozzap23 Hi Miguel, I've just looked at the 96 scale funnel I did and it checks out ok in FXD. I'd need to add a bit more detail as the gentleman who wanted at that size was going to add his own. Will look amazing. As for the bridge superstructure (and aft) it looks as if it is actually molded onto the over hull section. Would be nasty to try and remove! anyway, don't let me forget about it as I am getting on with other parts for the time being. I've not finished with the Ajax or the Leanders just yet :-)
sozzap23 Hi MIguel, except to say there are already a few parts in 1/350 that I have available. I could look at doing an Ajax specific boat set too.
sozzap23 Hi Miguel, don't worry you're not annoying! believe me I've had one or 2 of those and they really are annoying :-) with the 1/350 Ajax I will be looking at updating some of the parts for 1/350 scale quite soon. I also re did the funnel for 1/96 scale so it's got a load more detail on it and is much more accurate (although the current one is fine at 1/600). It also depends which time period you're building her? I think the kit depicts her possibly just before her 1941 refit and before she served in the Med. If you want to do her as she appeared in the Med then you'd need quite a lot of my parts (modelled specifically for this period). Aloso the turrets are completely wrong. ISW has depicted them as the 6 Inch MKXXII that the Nelson/Rodney carried. These are completely different! not quite sure how they cocked that one up! I'd just sit on the Ajax kit for a few months, then I'll release those extra parts in 1/350 scale for her.
1/350 RN WW1 13.5" MKV Guns x4 HMS Queen Mary
sozzap23 Hi Miguel, hope you're well. I can certainly look at that for you. They do seem to have a slightly different rangefinder/sighting ports on the top/rear of turret though. So I'll have to do some research into what this looks like to make them correct as the Kombrig set doesn't seem to have anything at all on them! Many thanks Simon (Micro Master)
1/600 Scale DKM Narvik 15 cm/48 (5.9") Tbts KC/36T now available. Highly detailed upgrade for the Airfix 1/600 Narvik kit. Available soon in other scales, check it out here! - http://shpws.me/OisZ 1/600 DKM 15cm/48 (5.9") Tbts KC/36T x1
1/700 Scale 4.7" MKXII CPXIX x4 Mount now available, Also in 1/200, 1/350, 1/500 and 1/600 scale. Check them out here! - http://shpws.me/OhGL 1/700 4.7" MKXII CPXIX Twin Mount x4
1/350 Scale 4.7" MKXII CPXIX Twin Mounts set of 4, now available. Accurate and highly detailed guns ideal for Tribal, J, K and N Class Destroyers. Ideal replacement for the inaccurate (and unavailable!) White Ensign parts, take a look at the renders. See My Shop for set of 3 version. Coming soon in other scales! - http://shpws.me/Ohgd 1/350 4.7" MKXII CPXIX Twin Mount x4
Now available 1/350 Scale Royal Navy tribal Class Boat to replace the German Hipper Class boats found in the Trumpeter kit! - http://shpws.me/Oetm 1/350 Scale RN Tribal Class Boat Set
HMS Nelson/Rodney 1/200 Scale 4.7 Inch /40 (12cm) QF Mark VIII guns x6 now available. Also available without shields, check them out here! - http://shpws.me/OdZI 1/200 4.7 Inch /40 (12cm) QF Mark VIII x6
1/350 Scale HMS Nelson/Rodney 4.7" /40 (12cm) QF Mark VIII x6. Highly detailed parts for the ISW or future Trumpeter kit. Details include non-slip plate detailing, rivets and open sighting ports. Coming soon in 1/200 scale. Check them out here! - http://shpws.me/OdyP 1/350 4.7 Inch /40 (12cm) QF Mark VIII x6
1/600 Scale 4.7 Inch /40 (12cm) QF Mark VIII x6 without shields for the HMS Nelson Kit or Rodney conversion with adjustable barrels. See My Shop for other scales (1/700, 1/350 and 1/200) and the later version with shield. Check them out here! - http://shpws.me/O7DI 1/600 4.7" /40 (12cm) QF Mark VIII x6 No Shields
1/600 Scale 4.7 Inch /40 (12cm) QF Mark VIII x6 for the HMS Nelson Kit or Rodney conversion. Comes with shield as later version, also has adjustable barrels. See My Shop for other scales (1/700, 1/350 and 1/200) and the earlier version without shield. Check them out here! - http://shpws.me/O7CL 1/600 4.7 Inch /40 (12cm) QF Mark VIII x6
Next
Logo

Hello.

We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers:

Click anywhere outside this window to continue.