Mike Murray


glaug commented on Nautical Femmebot Head by glaug
4 days ago
Nautical Femmebot Head
glaug @Denoysius52 It's clear, on my sample figure I have used slightly thinned Tamiya clear blue to tint it :) Don't paint the sides of the eye-stalks though, just the very ends, otherwise the fit becomes awkward.
glaug commented on Titans Return to 4.8mm neck adaptor by glaug
June 20, 2017
Titans Return to 4.8mm neck adaptor
glaug @sephthestoryteller I didn't take it as criticism, I appreciate the feedback all the same :) If you'd like a customised version made for you, I can do that easily.
glaug @sephthestoryteller Do you mean the fit of the joints, or the length of the neck itself? If you mean the fit of the joints, clear nail polish might help, unfortunately Solid Flexible plastics from Shapeways can have quite a bit of variation in size when it comes to printing. It was designed for a specific figure, although I am glad that you have been able to use it for your own custom. :)
Peaceful Tyrant for Cybertron Defence Scattorshot
glaug @Squigsquasher I think I get the gist. Hard to fix without measurements or at least a pic sadly!
glaug @Squigsquasher any chance you took a pic before customising it? Cheers for the heads up :)
glaug @Whovian41110 It looks quite different in-hand, but I sold off my prototype print to a friend so don't have it handy to take pics alas...
glaug @Squigsquasher @pedrop Thanks for sharing the pic :) I never got a Shapeways print of this version myself, and my original prototype's in the hands of a friend now, so I couldn't show it off myself! Can't wait to see your custom finished.
Nautical Femmebot head (Clear FUD/FED parts)
glaug @Hyoumaru Exactly :)
glaug @Hyoumaru Right, all done, hopefully it's clearly explained in the description :)
glaug @Hyoumaru I'Il make it nice and clear when it's all sorted out, but the "regular" version will be small and the upscaled one will be something else.
glaug @Hyoumaru You're in luck, apparently he goofed and also wants it smaller after all... But that'll happen tomorrow at the earliest!
glaug @Hyoumaru At the request of @ubertenorman, who is doing something similar with a different TR figure base, I made it 1.5x bigger than the original, putting it at about 19.5mm wide (mostly due to her visor and the "earpods"). A regular TR figure is about 15mm wide I think?
glaug @Hyoumaru If you mean a face that will fit onto a TR figure, not via Shapeways most likely. But, I DID just upload a piece that will allow you to plug the "Medium" sized versions of this head into a TR neck port. :) http://shpws.me/Opap
Neck adaptor for my Medium Sized Nautica head to fit TR figures - http://shpws.me/Opam Titans Return to 6mm neck adaptor
Nautica head, separated for Black Acrylate - http://shpws.me/Op6O Nautical Femmebot head (Black Acrylate parts)
glaug commented on Nautical Femmebot Head and Wrench set by glaug
April 9, 2017
Nautical Femmebot Head and Wrench set
glaug @ahrinn So, it turns out Shapeways have moved the goalposts on me since this set was last printed last month, because the replacement face set isn't printing in FUD/FED either, it's not just a problem with black acrylate. I'm working on an updated version right now so that you can re-order while the sale is still on...
glaug @ahrinn Well, I added the option, but the price is as you see... Plus, no light piping :(
glaug @ahrinn I hadn't, as it is designed for light piping. That's why it's only available in FUD/FED. I haven't actually bought anything in HDA, do you know if it's comparable to those two in terms of detail?
Replacement lower face for Nautical Femmebot set - http://shpws.me/OmZB Nautical Femmebot head mouth section
glaug commented on Sleuthing Robot Chest Parts V1.2 by glaug
February 22, 2017
Sleuthing Robot Chest Parts V1.2
glaug @fb04d10 It's a LEGO piece, with a LEGO Technic part as a 5mm adaptor.
glaug @GamorreanJedi No worries, as long as you're happy with it now, that's the important thing! Sounds like it might have just been print issues.
glaug @GamorreanJedi Not sure what to suggest about the clearance issues though as I haven't encountered them myself (and mine is painted from WSF polished, so it would really scratch if there were any). All I can suggest is that maybe there are some issues with how it's been reassembled, are you able to supply a pic of the vehicle mode, or from the side?
glaug @Housewife2000 First time I've seen a repainted Siren head on him! Thanks for sharing, it looks great! :D
glaug @itzilzah Thanks for your purchases, and the kind words. :) Out of interest, which parts did you need to alter, and what material did you get it in?
Designed for a custom CW/TR Combiner - http://shpws.me/Nezz CW joint plugs with 5mm Adaptors
glaug commented on CW Combiner Port to TR Peg by glaug
January 6, 2017
CW Combiner Port to TR Peg
glaug @WMagnaus http://shpws.me/NczH How's this? :)
glaug @WMagnaus Probably, but not til I am home after the hols :)
glaug @WMagnaus Feel free to send pics, I can take a look and see if I can revise any of the parts if it'd help.
glaug @Squigsquasher I made it in response to a request. I'm faaairly sure the bodies would disconnect before the pegs snapped, but I will do so if it's needed.
glaug commented on CW Limb Adaptors for TFC Hades by glaug
November 26, 2016
CW Limb Adaptors for TFC Hades
glaug @Squigsquasher It's actually FAR easier to do it the other way round. Might give it a whirl later when I have more free time on my hands.
Combiner Wars Limb Adaptors for TFC Hades/Liokaiser! - http://shpws.me/MYLN CW Limb Adaptors for TFC Hades
Custom Titans Return/Combiner Wars connectors - http://shpws.me/MTbY CW Combiner Port to TR Peg
Generations Stealth Bomber Complete Nostalgia Set
glaug @pedrop Sure, let me know and I'll see what I can do.
glaug @pedrop Which part do you need, just the cannon itself? The wing pieces and mount wouldn't be of any use for any other figure.
glaug commented on CW Ankle Joint Sprued by glaug
October 14, 2016
CW Ankle Joint Sprued
glaug @soble92 I think it might be a little big, you'd have to remove it because of how his peg folds in. I'll dig out my prints of this and get back to you!
glaug commented on CW Combiner Port to 5MM Peg by glaug
October 9, 2016
CW Combiner Port to 5MM Peg
glaug @WMagnaus Hmmn, give me a few days, and I should be able to make you a custom set with all 4 pieces. I'll make sure the pricing reflects the extra work, but doing all 4 in a single set should save you a little money too.
glaug @WMagnaus Ah, I see! I slightly misread your original comment, sorry. This is the male end of the CW Combiner port, so I would just need to replace the 5mm peg with a TR head sized plug. What I will say is that the TR head connectors are unlikely to take the weight well even if I were to modify this part to do what you want.
glaug @WMagnaus This is actually the wrong side of a CW port for what you want, alas. What exactly is it you want to do?
glaug commented on Medical Sportscar Femmebot Chest by glaug
May 18, 2016
Medical Sportscar Femmebot Chest
glaug @Dr_Lockdown Well, this is the chest I made for a Minerva custom, so there's actually a whole new head with a whole new neck that goes with this chest. The Nightbeat-style chest I did is designed to go with an extender that makes the original Nightbeat head about 3mm higher up. Makes a big difference.
glaug @Dr_Lockdown This replaces the entire chest piece. I don't know if it would work with the waist extension, it's designed to work with a neck extension I made. :)
PCC Tank to Colossus Tank Limb conversion set
glaug @Dr_Lockdown "Colossus" as in Fansproject's Bruticus. :)
glaug commented on "MtMtE" Tubes head by glaug
March 17, 2016
"MtMtE" Tubes head
glaug @ProfessorDire This actually is pretty much Legends sized, actually. The iGear "Tubes" toy is actually slightly shorter than Legends Pipes! I was going to make a version specially for that mould, but removing the head is quite difficult as IIRC it's pinned riveted into place.
glaug commented on Nautical Femmebot Upgrade Set by glaug
February 20, 2016
Nautical Femmebot Upgrade Set
glaug @ProfessorDire I've just realised it's because this is the wrong set :) You want https://www.shapeways.com/product/JPRFB6QUU/nautical-femmebot-body-kit?li=search-results-1&optionId=57197433 And the head set.
glaug @ProfessorDire I would love to see you do so :)
glaug commented on Classics Truck Leader Feet and Ankles (Tall) by glaug
February 9, 2016
Classics Truck Leader Feet and Ankles (Tall)
glaug @goddamnkenneth I remember seeing this on twitter, cheers for sharing the pics here :)
glaug commented on Classics Truck Leader Hands by glaug
February 9, 2016
Classics Truck Leader Hands
glaug @goddamnkenneth Thanks for sharing the pics here! :)
glaug commented on Heroic Duo Alternative Weapon Hinges by glaug
February 2, 2016
Heroic Duo Alternative Weapon Hinges
glaug @TXR4521 Thanks for the kind words! Glad you like them :D
glaug commented on Great Thundering Truck Leader Head set by glaug
January 19, 2016
Great Thundering Truck Leader Head set
glaug @Dr_Lockdown Awesome, thanks, I'm glad to hear it. :)


We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers:

Click anywhere outside this window to continue.