Ariel Lemon

fakebusker83

3D modeler, Designer, Product designer, Artist, Maker
I'm an enthusiastic toy customizer.

530
Followers
28
Following
fakebusker83's
RTS Deluxe Perceptor Accessories
fakebusker83 Hi @Hyoumaru, it's unlikely I'll offer BHDA for this model unfortunately, as the set contains 5 separate components sprued together. BHDA doesn't do well with sprues, and having these components separate and costing at least $5 a piece doesn't make economic sense. We shouldn't lose hope yet; I'll test to see if a static sprue and a new parts layout can be used.
fakebusker83 commented on Minibot "Quantus" by fakebusker83
2 days ago
Minibot "Quantus"
fakebusker83 @HarleyQuinade hi there, this model can be scaled up but it would be prohibitively expensive. How big are we looking at?
Skyquake head For CW Silverbolt
fakebusker83 @PowerEncarnate hi there, no plans for combiner head at the moment...I thought a recoloured Superion head fits my concept fine? :)
fakebusker83 @Ashtonmcvae oh sure thing, I can do a resize. Let me have a look at it this weekend. Sorry for the late reply.
fakebusker83 Hi @Krommdor, if you're looking for a TR faceplate of this character, I can create one for you. TR deluxe heads are slightly larger than other lines, so I think this Voyager head fits the figure fine if you're leaning on the neck adaptor route.
D.R.E.A.D 6 Dreadacles set
fakebusker83 @lexinomicon hi there! Each dreadacle link is actually 5mm in diameter, so the entire chain is literally 5mm peg compatible.
Chromia Faceplate for Titans Return Blurr
fakebusker83 Hi @Malunis , oh I may have miscommunicated. When I said no painting required it refers to the main figure itself since Blurr and Chromia have such similar colour schemes. You'll still need to paint the 3D printed piece. Frosted Ultra Detail comes out whitish/translucent/yellow.
Cliffjumper head for TR Legends Roadburn
fakebusker83 @galahad_knight Thanks for the feedback! Do you happen to have images of your print?
fakebusker83 commented on Snare head For CW Firefly by fakebusker83
May 12, 2017
Snare head For CW Firefly
fakebusker83 @Ashtonmcvae Hm from what I remember, it is quite hard to swap heads for FOC Starscream because of the pin in the way. If you succeed in removing the head please let me know and I can make a variant of this model for you. Best regards, Ariel
Briefcase for Voyager Brainstorm
fakebusker83 @Soundbarricade Haha...I don't have a TR Brainstorm on hand at the moment. You can be the first!
fakebusker83 @Soundbarricade The cuff is not designed for the TR deluxe, but material should be flexible enough to accommodate the new shape. The handle can be opened on one side to allow the hand to go in. So yes, it's both opened and closed. :)
fakebusker83 @fb04d10 hey there! What tweaks would you like to see?
Tri-barrel Blaster for Evasion Optimus
fakebusker83 @tkrbob4093 It looks fantastic! The extra large size really help bring out the details :)
fakebusker83 commented on The Desecrated Vambrace by fakebusker83
March 3, 2017
The Desecrated Vambrace
fakebusker83 Hi @m_d_woodworth, maybe the lack of lines was due to the polishing process? And big, cleaner surfaces polish better than smaller ones.
fakebusker83 commented on TFP Thirsty Head by fakebusker83
February 21, 2017
TFP Thirsty Head
fakebusker83 @aganouri I'm not familiar with the RID series, but I see that Shadelock uses a Air Vehicon template?
fakebusker83 commented on Heels for deluxe Windblade by fakebusker83
February 21, 2017
Heels for deluxe Windblade
fakebusker83 @aganouri Alas...use superglue to tweak their tightness? You might have gotten a less than ideal SLS nylon print batch.
fakebusker83 commented on Smashmaster Seismus by fakebusker83
February 21, 2017
Smashmaster Seismus
fakebusker83 @StrategistOnslaught It's 'See-Mus'. The 'S' is silent! :D
fakebusker83 @aganouri For such tiny pieces, the varying tolerances in 3D printing play a much larger role. You will definitely need to tweak your joints to make them fit. Be it using glue or shaving stuff down.
fakebusker83 commented on Crossfire Hands (Brute variant) by fakebusker83
January 27, 2017
Crossfire Hands (Brute variant)
fakebusker83 @fbbd07c hi there, these hands are scaled similar to Fansproject Bruticus upgrade hands...I don't think they scale with any Optimus figures in the BH line though...
Apex Armory for TR Sentinel Prime (Large Blasters)
fakebusker83 Thanks @mikepre84 ! That is looking awesoooome :D
Krok Head For Combiner Wars deluxe Air Raid
fakebusker83 @Ashtonmcvae Hi there, unfortunately this head is not built to fit Generations Megatron, and its neck ball socket fits the torso differently.
fakebusker83 commented on Scrapaci Famishius (5 pack) by fakebusker83
January 6, 2017
Scrapaci Famishius (5 pack)
fakebusker83 @clickpic101 Oh dear...that's brutal :O
TR Leader Soundwave Blaster/Launcher Accessory
fakebusker83 @GamorreanJedi you found it! How is it. Does the accessory fit snug in there?
fakebusker83 @GamorreanJedi merry Christmas and thanks for sharing those sweet pictures! See if you can find the way to store them in boombox mode! That's what the rectangular tabs are for :D
fakebusker83 commented on Stalker head For CW Rook by fakebusker83
December 25, 2016
Stalker head For CW Rook
fakebusker83 @blunghole your Stalker looks amazing! Thanks for sharing and Merry Christmas to you!
Titans Return Voyager Galvatron Helm
fakebusker83 Merry Christmas @fbaa372 !!!
fakebusker83 commented on TR Galvatron Cannon Adaptor by fakebusker83
December 15, 2016
TR Galvatron Cannon Adaptor
fakebusker83 @PNeithan The colour looks very good! Nice job!
fakebusker83 Hi @tekkaman2k5 , to tighten the peg hole you can try coating it with nail polish or superglue?
fakebusker83 commented on G1 Styled Helm for TR Galvatron by fakebusker83
December 3, 2016
G1 Styled Helm for TR Galvatron
fakebusker83 hi @wildkickwolf what do you mean? Do you mean the colour? I do not have control over the colour that Shapeways uses.
fakebusker83 @wildkickwolf Hi there, yes the colour is different from Takara's Galvatron so you'll need to paint it to match.
fakebusker83 commented on Heads for CW 'Overlord' by fakebusker83
December 1, 2016
Heads for CW 'Overlord'
fakebusker83 @Heckfire The small head should fit Scattershot. But I can't confirm if the combined head can work since Silverbolt/Scattershot and Cyclonus have different head cavities to accommodate their respective heads.
fakebusker83 commented on D.R.E.A.D agent Casúr (head) by fakebusker83
November 29, 2016
D.R.E.A.D agent Casúr (head)
fakebusker83 Hi @aganouri , normally for custom requests I put up links for a couple of months before I clear them for housekeeping so I guess the original was removed this way. For now try this link: https://www.shapeways.com/product/DRJJRQMET/tfp-dread-vehicons-2-heads?key=4cb2d98d1201d1251c0f567a7f98c094
fakebusker83 commented on TFP Knockout's Bodywork Tools by fakebusker83
November 24, 2016
TFP Knockout's Bodywork Tools
fakebusker83 @spasmdragon Hi there, unfortunately this current version of the shoulders cannot be printed under Shapeways guidelines due to thin walls. :( Still trying to rework the design at the moment...
Next
Logo

Hello.

We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers:

Click anywhere outside this window to continue.