Happy King's Day! TODAY ONLY, use code KINGSDAY2017 to get 15% off all Orange, Blue, Red and White designs. Details

Giles Williams


3D modeler, Designer, Product designer, Artist, Artisan

aegidian commented on F1 2009-2013 x12 Sprued by aegidian
November 21, 2016
F1 2009-2013 x12 Sprued
aegidian @PCofTQY I use Humbrol model acrylics and a number 00 brush to paint when I need to paint a tiny model. To prime them I place the model in a cardboard box (outside) then apply a very light spray coat of primer, wait for it to dry then turn the model over and prime the other side. It's best to wait a few hours between priming and beginning to paint to allow the primer to properly dry. I have used artists acrylics, with a little water to thin them they can be okay for model painting too.
aegidian @PCofTQY I would prime them first. Especially the Nylon and Stainless Steel based models, because the Nylon is absorbent and the Stainless Steel's surface texture is improved by priming. I can't offer any advice on Acrylic based models as I've not tried to paint those. I used Humbrol Hobby Spray Acrylic Primer 1 (AD6001), which seemed to work well.
aegidian @PCofTQY Hi, I am based in the UK (London) but the prints are made in Shapeways factories in Europe and America. -- Giles.
aegidian commented on F1 2009-2013 20mm scale by aegidian
November 4, 2016
F1 2009-2013 20mm scale
aegidian @PCofTQY Re: clear models. It's down to the different costs for the materials. Re: sizes. The dimensions given on this site are for the entire sprue (joined up collection) of the 12 cars. Each car is approximately 20mm x 11mm x 7mm. Remember: I don't make these things or sell them or ship them myself. That's all done by Shapeways on my behalf, so a lot of your question are better handled by contacting their customer support. I just (just!) create the designs used by Shapeways to make these 3d prints, for which I take a small amount out of the money you pay for each model.
aegidian @PCofTQY Re: free shipping - as I understand it yes.
aegidian @hawke0 Yeah. Shapeways doesn't think it's printable in White Strong & Flexible Polished. Don't ask me why, their processes for determining what is and isn't printable are somewhat not transparent, unpolished and very inflexible. :)
aegidian @hawke0 These are slightly larger and are therefore less fragile, easier to handle and fit better on most racing board-game cards.
aegidian commented on Tyrrel P34 HO scale by aegidian
June 16, 2016
Tyrrel P34 HO scale
aegidian @dreddric Like these perhaps? http://shpws.me/Ch8R
aegidian @rec1 I'm not really that brilliant at modelling humans even when I have the time/energy/spoons to do it. so I'm sorry, but that's not very likely.
aegidian @rec1 Well, the March chassis was used by a couple of different teams so that can get at least two paint jobs, but yeah I see your point. I'll look at the rest of the '76 field.
aegidian @montoya1Yeah. I've got a long wheelbase MG 1.7 (PN:70638) I bought for research. I'll look up that link, it'd be a fun project to try.
aegidian @montoya1 No, not for any particular board game. I did have AFX slot cars in mind when I started making HO scale models, so adapting a similar, 4-wheeled model might not be impossible.
A Towpath Ranger Star!
Check out this cool product! - http://shpws.me/M9cq Pair of Bat Ears for Cycle Helmet
aegidian favorited 3skull cufflinks by aegidian
April 21, 2016
I'd just like to note, that this month's and last month's profits will be going directly to help fund this:

aegidian commented on Formula 1 Miniatures - 1976 by aegidian
February 15, 2016
Formula 1 Miniatures - 1976
aegidian @rec1, sure you'll find them as HO scale models here: https://www.shapeways.com/shops/aegidian?section=Cars
aegidian I've successfully painted the metal cars. Use a good acrylic undercoat and a fine brush - fine ink pens are probably the best way of adding small details like numbers.
aegidian commented on Ossuary d20 by aegidian
August 26, 2015
Ossuary d20
aegidian @tomvass1994 Hi Tom, thanks for taking an interest in this die and my dice-making. I try as much as possible to make my dice fair in their design, in the case of the ossuary dice this meant two main design considerations: firstly the dice had to be symmetrical and the points of contact with a flat surface even, I achieved this by using hemi-spherical skull tops as the points of contact and rotating the skull design to spread their slightly off-centre weight distribution evenly; secondly the dice have to be evenly weighted and this is a trickier problem that I try to mitigate by varying the depth of the indices on the faces of the die. Obviously this is rarely a perfect process, and I can't guarantee fairness for a die with such a dramatic design. But I can honestly say that I've done everything I consider possible to try to make them fair. As to testing - aside from a dozen or so rolls after receiving a test-print, that would only show up a gross problem in fairness - I don't _test_ my dice for fairness. If a die is grossly unfair, please let me know as much about the problem as possible (the circumstances, how reproducible the unfairness is etc.), and if a fix is possible I'll do my best to correct the design. I'm not in the business of producing casino dice (which are rigorously tested for fairness) I produce unusual dice that are supposed to be enjoyable to use in a social environment and I believe my dice are fair enough for use in casual gaming with little (if any) chance of them being described as 'biased'. I hope that helps. Again, thanks for taking an interest! -- Giles.
aegidian commented on Ossuary d12 by aegidian
April 15, 2015
Ossuary d12
aegidian @rickisb Thank you!
aegidian commented on Formula 1 Miniatures - 2011 by aegidian
February 19, 2015
Formula 1 Miniatures - 2011
aegidian @leandrolopardi Yes, you should receive 40 cars.
aegidian @leandrolopardi, there are ten (10) cars in this model.


We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers:

Click anywhere outside this window to continue.