|
Exploring and creating the (im)possible through the magic of 3d printing.
Here you can find original Art and Design in a variety of fields and materials. Check out the latest models here or browse by category: |
|||
| Jewelry | Gyro the Forms | Sculptures | Decorative |
|
Bracelets Earrings Pendants Rings Necklaces |
Gyro the Cube Gyro the Dodo |
Evolutionary Invertebrates Gyroid Exploration Fractal Exploration |
Lighting Ceramics |
|
To stay updated, follow Virtox on Tumblr, Facebook, Twitter, Youtube or Flickr
|
|||
virtox is selling 8 products in Vishal section
by
virtox
Dodecahedral sibling of Gyro the Cube (XL).
Same principle, more faces, more rings and more fun ! :-)
Made of five nested dodecahedra, each one is limited to rotate about it's own axis.
This is the 9cm / 3.5" version.
Please be careful with a gyro this size, fingers may get pinched if put between the (moving) rings, so handle with care!
It's easiest to start with the inner one and then continue outwards.
And then... spin it away !
Gyro the Cube
$ 25.00 (Excl vat)
$ 29.75 (Inc vat) Gyro the Dodo
$ 30.00 (Excl vat)
$ 35.70 (Inc vat) Gyro the Cube (L)
$ 75.00 (Excl vat)
$ 89.25 (Inc vat) Gyro the Dodo (L)
$ 80.00 (Excl vat)
$ 95.20 (Inc vat)
Same principle, more faces, more rings and more fun ! :-)
Made of five nested dodecahedra, each one is limited to rotate about it's own axis.
This is the 9cm / 3.5" version.
Please be careful with a gyro this size, fingers may get pinched if put between the (moving) rings, so handle with care!
Instructions
For tighter clearances it is printed with the hinges out of place. So this model needs a little manual assembly. Each element has two "knobs" which need to be "clicked" into the corresponding "clamps" in the parent element.It's easiest to start with the inner one and then continue outwards.
And then... spin it away !
Also available
Gyro the Cube$ 25.00 (Excl vat)
$ 29.75 (Inc vat) Gyro the Dodo
$ 30.00 (Excl vat)
$ 35.70 (Inc vat) Gyro the Cube (L)
$ 75.00 (Excl vat)
$ 89.25 (Inc vat) Gyro the Dodo (L)
$ 80.00 (Excl vat)
$ 95.20 (Inc vat)
by
virtox
A hollow, organic and elegant form, showing peace and love in multiple dimensions.
A sculpture printed as two seperate but entangled parts which snugly fit together.
The two parts allow you to slide it open, so you can use it to safely store a keepsake.
When closed, it is about 20cm/8" tall.
A base is available seperately.
Please PM for Inquiries.
A sculpture printed as two seperate but entangled parts which snugly fit together.
The two parts allow you to slide it open, so you can use it to safely store a keepsake.
When closed, it is about 20cm/8" tall.
A base is available seperately.
Please PM for Inquiries.
by
virtox
Accused of being fake, witchcraft and simply impossible..
This kinetic sculpture is inspired by the unlimited freedom of 3d printing,
it wobbles and turns with a slight movement of the hand.
Give it a good spin and it moves in erratic and wild ways.
Corner stand for this model is here: Corner stand for 10cm Gyro the Cube
This is the 10cm / 4" version, see the Gyro the Forms section for other shapes and sizes.
Instructions
It is composed of four concentric cubes, each one spinning around a different axis.
The model needs some minor assembly:
Each inner cube has two knobs which need to be placed into the corresponding clamps in the parent cube. It's easiest to start with the inner most and continue outward.
And then... spin it away !
Notes
Be careful with a cube this size, fingers may get pinched if handeled carelesly.
It is not a toy for children!
This kinetic sculpture is inspired by the unlimited freedom of 3d printing,
it wobbles and turns with a slight movement of the hand.
Give it a good spin and it moves in erratic and wild ways.
Corner stand for this model is here: Corner stand for 10cm Gyro the Cube
This is the 10cm / 4" version, see the Gyro the Forms section for other shapes and sizes.
Instructions
It is composed of four concentric cubes, each one spinning around a different axis.
The model needs some minor assembly:
Each inner cube has two knobs which need to be placed into the corresponding clamps in the parent cube. It's easiest to start with the inner most and continue outward.
And then... spin it away !
Notes
Be careful with a cube this size, fingers may get pinched if handeled carelesly.
It is not a toy for children!
by
virtox
These remains tell no tale..
but ever wondered what happens,
when a snake eats its own tail ?
In this tale, the tail is fully gobbled up but still hanging freely.
Also available as a pendant.
but ever wondered what happens,
when a snake eats its own tail ?
In this tale, the tail is fully gobbled up but still hanging freely.
Also available as a pendant.
by
virtox
Candle stand, based on the beautiful Gyroid formula, mimicking coral structures.
Suitable for (non-dripping) 20-22mm diameter candles.
Please handle with care and do not to let the flame get to low/close to the stand.
For extra protection, wrap bottom of candle with aluminium foil.
A double color version is also available
Suitable for (non-dripping) 20-22mm diameter candles.
Please handle with care and do not to let the flame get to low/close to the stand.
For extra protection, wrap bottom of candle with aluminium foil.
A double color version is also available
by
virtox
While provocatively curved, she is indeed very shy!
She only allows a glowing glimpse of what she holds inside.
A light shade for LED tea-light or Luxeon/Cree LED
Hiding the source from direct view, resulting in a gentle light emerging
Limited edition
This is the original design, at nearly 20cm high, with 2mm thick walls it is costly to produce.
To compensate, only ten will be produced, currently only six are still available
More
Other sizes and shapes available.
She only allows a glowing glimpse of what she holds inside.
A light shade for LED tea-light or Luxeon/Cree LED
Hiding the source from direct view, resulting in a gentle light emerging
Limited edition
This is the original design, at nearly 20cm high, with 2mm thick walls it is costly to produce.
To compensate, only ten will be produced, currently only six are still available
More
Other sizes and shapes available.
by
virtox
Two stranded spirals, finding their way back together.
A bendy and trippy decorative piece designed for the Strong & Flexible materials.
Limited edition, sold out.
Photographs don't do it justice, it's an eye-catching treat for the senses.
Check out the video!
A bendy and trippy decorative piece designed for the Strong & Flexible materials.
Limited edition, sold out.
Photographs don't do it justice, it's an eye-catching treat for the senses.
Check out the video!
Shop Details
Expertise
- Designer
- Artist
- Maker
Shop Sections
- All Sections
- Atomic
- Ceramics
- Christmas
- Coded Rings
- Coffee Not Included
- Cubichain
- Current
- Decorative
- Dutch Design Week
- Eardrops
- Evolutionary
- Fractal Explorations
- Full Color
- Gyro the Cube
- Gyro the Dodo
- Gyro the Forms
- Gyroid Explorations
- Invertebrates
- Jewelry
- Jewelry - Bracelets
- Jewelry - Earrings
- Jewelry - Necklaces
- Jewelry - Pendants
- Jewelry - Rings
- Julia Vase Iterations
- Lighting
- Menger Beads
- Quarks
- Sculptures
- Sculptures - Evolutionary
- Sculptures - Invertebrates
- Vishal
- X-math
