Custom design, not for sale.
http://www.shapeways.com/shops/virtox&section=Workshop

Custom design, not for sale.
http://www.shapeways.com/shops/virtox&section=Workshop

Custom design.
Not for sale.
http://www.shapeways.com/shops/virtox&section=Workshop

A matching pair of earrings, resembling small twigs.
Absolutely stunning in the new Premium Silver!
These are actual photos!

Also wonderful in the other metal finished.
For example, the steel printing process adds an almost natural texture to the twigs.
Which also works very well in bronze or gold finishes!
More earrings

Silver earring hooks included, courtesy of Shapeways!
One twig is approximately 30x19x7mm.

The year is 2013, who needs mass production jewelry ?
Personalized jewelry is here !
Get these fabulous designer earrings with your initials or symbols.

You can also supply your own miniature model, please send a personal message for options and possibilities !
Each pair is digitally handmade and optimized.
The letters are suspended either from the top or the bottom, depending on the chosen characters.
If you have a preference for bottom or top stilt, please add a remark, which one you'd prefer.

People seem to have strong preference regarding the top part of the model: You can choose for a version with a small hole in the top (example mounting type: hole), through which a ring and hook will be attached
Or a version where the ring is already part of the model itself and only the hook is attached. (example mounting type: ring)

Silver earring hooks included, courtesy of Shapeways!

More earrings

An intimate and precious gift for that special anyone!
Your name or message in braille on a symbol of eternity.

Available in sizes from 16 to 22mm. (Internal ring diameter)
Recommended material : Silver (Glossy)

Technical details: This 5 mm wide ring contains a fine 6-dot braille.
Image is render. But a 3mm version with photograph is here.

More rings, Pendants and Bracelets available.

Double Shell Emy
Two intertwined shells, made by revolving circles and perforated with holes.

Member of the Evolutionary family.
A twin-shell model with two female sides.
Free shipping worldwide !
http://www.shapeways.com/shops/virtox&section=Evolutionary

Member of the Evolutionary family.
A twin-shell model with a two smooth sides.

http://www.shapeways.com/shops/virtox?section=Evolutionary

While provocatively curved, she is indeed very shy!
She only allows a glowing glimpse of what she holds inside.

A light shade for LED tea-light or Luxeon/Cree LED
Hiding the source from direct view, resulting in a gentle light emerging

Limited edition
This is the original design, at nearly 20cm high, with 2mm thick walls it is costly to produce.
To compensate, only ten will be produced, currently only six are still available

More
Other sizes and shapes available.

Strange..
One in the family of six quarks.

(Necklace not included)

It arrived in WSF, and it works for real :-)
Gear system based on hypotrochoid shapes.
It is printed as a 9 piece puzzle, a VERY frustrating one at that ;-)

Depending on the print batch, it might need some minor sanding to make it run properly.

Steel available on request, still untested by me.
I think steel will work but probably needs some more sanding to make it fit.
With the new pricing scheme, the steel version is no longer available.
If you want one in steel, please send me a message and we will find a way.

An intimate and precious gift for that special anyone!
Your name or message in braille on a symbol of eternity.
Available in sizes from 16 to 22mm. (Internal ring diameter)

Recommended material : Silver (Glossy)
It is the only material with enough resolution to capture the full detail of this fine braille.

Technical details:
This 3 mm wide ring contains a very fine 6-dot braille.
Dot diameter is 0.8mm and the spacing within one cell is 0.2mm, space between cells is 1.2mm.
A 5mm version is here.


More rings

Pendants

Bracelets

An open (dry-flower) vase, where the inside crosses into the outside.

A spiraling web cube

The cube contains 24 spirals intertwining.
A large, playful and decorative piece.

See video for full effect!

Accused of being fake, witchcraft and simply impossible..
This kinetic sculpture is inspired by the unlimited freedom of 3d printing,
it wobbles and turns with a slight movement of the hand.
Now give it a good spin or puff of air and it erupts in erratic and wild behavior.

This is the 5cm / 2" version, see the Gyro the Forms section for other shapes and sizes.
Corner stand available separately, or get the complete set below!

NEW!
Now also available as a pendant/keyfob!
In both Extra small and Small

Instructions
It is composed of four concentric cubes, each one spinning around a different axis.
The model needs some minor assembly:
Each inner cube has two knobs which need to be placed into the corresponding clamps in the parent cube. It's easiest to start with the inner most and continue outward.
And then... spin it away !

Notes
Do not be alarmed if your cube will not run smoothly at first!
Because of minor variations as a result of the printing process,
some need to wear in a little but will loosen up very quickly.
In the example video I am blowing on it to make it move, it's that smooth.

Be a little careful with (the assembly of) the Alumide version as this material is slightly less flexible/robust than the Strong & Flexible materials.

Get a complete set.
A default set consists of an Alumide Gyro the Cube and a White stand, you can change the materials in your cart later. +

Curley alien, escaped from it's pendant.
Actually it is a posed "character" from a short animation I made :
http://www.youtube.com/watch?v=GFCem6JfisY
WSF tested, others available per request

Two stranded spirals, finding their way back together.
A bendy and trippy decorative piece designed for the Strong & Flexible materials.

Limited edition, sold out.
Photographs don't do it justice, it's an eye-catching treat for the senses.
Check out the video!

A triply model, composed of three interlocked but separate matrices, which is nearly impossible to make without 3d printing!
Suitable as pendant, key fob or fidget toy :-)
Also available as a pair of earrings(including silver hooks).

Designed for the Strong and Flexible materials.
Strut thickness : 1mm.
Hole size 4-5 mm.

Big available here: here it is.

Sorry, this size is no longer available
Please go here for the large version


A delicate free form model dubbed "Holey".

Makes for some nice Christmas decorations :-)

Minimum thickness is around 0.25 mm on the inside struts.
Prints perfectly in Strong & Flexible, might get bend a bit during transport, but you can bend it back gently if you hold it in warm/hot water.
The tips are sharp and fragile, so please handle with care.