|
Exploring and creating the (im)possible through the magic of 3d printing.
Here you can find original Art and Design in a variety of fields and materials. Check out the latest models here or browse by category: |
|||
| Jewelry | Gyro the Forms | Sculptures | Decorative |
|
Bracelets Earrings Pendants Rings Necklaces |
Gyro the Cube Gyro the Dodo |
Evolutionary Invertebrates Gyroid Exploration Fractal Exploration |
Lighting Ceramics |
|
To stay updated, follow Virtox on Tumblr, Facebook, Twitter, Youtube or Flickr
|
|||
virtox is selling 24 products in Dutch Design Week section
by
virtox
A matching pair of earrings, resembling small twigs.
Absolutely stunning in the new Premium Silver!
These are actual photos!
Also wonderful in the other metal finished.
For example, the steel printing process adds an almost natural texture to the twigs.
Which also works very well in bronze or gold finishes!
More earrings
Silver earring hooks included, courtesy of Shapeways!
One twig is approximately 30x19x7mm.
Absolutely stunning in the new Premium Silver!
These are actual photos!
Also wonderful in the other metal finished.
For example, the steel printing process adds an almost natural texture to the twigs.
Which also works very well in bronze or gold finishes!
More earrings
Silver earring hooks included, courtesy of Shapeways!
One twig is approximately 30x19x7mm.
by
virtox
Dodecahedral sibling of Gyro the Cube.
Same principle, more faces, more rings and more fun ;-)
Made of five nested dodecahedra, each one is limited to rotate about it's own axis.
This is the 6.5cm / 2.5" version, see the Gyro the Forms
Experimental corner stand available here
Instructions
For tighter clearances it is printed with the hinges out of place. So this model needs a little manual assembly. Each element has two "knobs" which need to be "clicked" into the corresponding "clamps" in the parent element.
It's easiest to start with the inner one and then continue outwards.
And then... rotate away !
Same principle, more faces, more rings and more fun ;-)
Made of five nested dodecahedra, each one is limited to rotate about it's own axis.
This is the 6.5cm / 2.5" version, see the Gyro the Forms
Experimental corner stand available here
Instructions
For tighter clearances it is printed with the hinges out of place. So this model needs a little manual assembly. Each element has two "knobs" which need to be "clicked" into the corresponding "clamps" in the parent element.
It's easiest to start with the inner one and then continue outwards.
And then... rotate away !
by
virtox
Cubichain bracelet (for custom sizes)
Interlocked cubes form a playful and delicate chain.
This unique eye-catcher will keep you distracted all day long :-)
Available in
Polished: sparkly white, coral red, royal blue, hot pink and violet purple.
Rough: black.
Details
Bracelet thickness: 8mm/0.3".
Minimal material thickness >1.0mm
Inner length: 14 to 24cm/5.5 to 9.4 Inch.
Actual length may vary about 5%, but material will stretch a little bit.
Which size?
Take a piece of string or measuring tape and wrap it around the widest part of your hand, as if putting on a bracelet. See example photo above.
Mark where it overlaps and measure the distance between the marks in cm.
For inches to cm -> multiply by 2.54.
Enter this cm value in the Inner Length field.
Popular sizes
You can order most popular sizes directly via the links below, this is cheaper and faster!
XS 14 cm/ 5.5 inch
S 16 cm/ 6.3 inch
M 18 cm/ 7.1 inch
L 20cm/ 7.9 inch
XL 22cm/ 8.7 inch
XXL 24cm / 9.4 inch
A matching necklace available here:
Cubichain Necklace 8
Remove Label
To aid in production and sorting the model will be labeled with a ring with info. You can cut of this ring with a strong pair of cutters/scissors.
Interlocked cubes form a playful and delicate chain.
This unique eye-catcher will keep you distracted all day long :-)
Available in
Polished: sparkly white, coral red, royal blue, hot pink and violet purple.
Rough: black.
Details
Bracelet thickness: 8mm/0.3".
Minimal material thickness >1.0mm
Inner length: 14 to 24cm/5.5 to 9.4 Inch.
Actual length may vary about 5%, but material will stretch a little bit.
Which size?
Take a piece of string or measuring tape and wrap it around the widest part of your hand, as if putting on a bracelet. See example photo above.
Mark where it overlaps and measure the distance between the marks in cm.
For inches to cm -> multiply by 2.54.
Enter this cm value in the Inner Length field.
Popular sizes
You can order most popular sizes directly via the links below, this is cheaper and faster!
XS 14 cm/ 5.5 inch
S 16 cm/ 6.3 inch
M 18 cm/ 7.1 inch
L 20cm/ 7.9 inch
XL 22cm/ 8.7 inch
XXL 24cm / 9.4 inch
A matching necklace available here:
Cubichain Necklace 8
Remove Label
To aid in production and sorting the model will be labeled with a ring with info. You can cut of this ring with a strong pair of cutters/scissors.
by
virtox
The full-color version of the double gyroid bones!
Printed as two separate but intertwining parts.
Please see video above.
This principle is also available as a candle stand.
Please contact me if you require custom texture mapping.
Printed as two separate but intertwining parts.
Please see video above.
This principle is also available as a candle stand.
Please contact me if you require custom texture mapping.
by
virtox
Candle stand, based on the beautiful Gyroid formula, mimicking coral structures.
Suitable for (non-dripping) 20-22mm diameter candles.
Please handle with care and do not to let the flame get to low/close to the stand.
For extra protection, wrap bottom of candle with aluminium foil.
A double color version is also available
Suitable for (non-dripping) 20-22mm diameter candles.
Please handle with care and do not to let the flame get to low/close to the stand.
For extra protection, wrap bottom of candle with aluminium foil.
A double color version is also available
by
virtox
This ring contains an inverted/positive maze pattern.
To remind us to stay upbeat when we are lost in life.
The ring is 5mm wide.
And available in ring size from 16 to 22mm.
To remind us to stay upbeat when we are lost in life.
The ring is 5mm wide.
And available in ring size from 16 to 22mm.
by
virtox
A triply model, composed of three interlocked but separate matrices, which is nearly impossible to make without 3d printing!
Suitable as pendant, key fob or fidget toy :-)
Also available as a pair of earrings(including silver hooks).
Designed for the Strong and Flexible materials.
Strut thickness : 1mm.
Hole size 4-5 mm.
Big available here: here it is.
Suitable as pendant, key fob or fidget toy :-)
Also available as a pair of earrings(including silver hooks).
Designed for the Strong and Flexible materials.
Strut thickness : 1mm.
Hole size 4-5 mm.
Big available here: here it is.
by
virtox
This pair of loosely entangled bracelets is based on Gyroid bones.
A very elegant variation on the mathematical equation.
This is the broad version:
Width : 24mm / 0.9 Inch
Thickness : 9mm / 0.4 Inch
Size/Diameter : 40 - 70mm / 1.6 - 2.8 Inch
Each size is custom created for a uniform look and feel over all sizes.
It's quite flexible, so you can easily slide it over the hand.
If you would like a small opening in the bracelet so you can have a tighter fit, please leave a remark.
Slim version available here.
A very elegant variation on the mathematical equation.
This is the broad version:
Width : 24mm / 0.9 Inch
Thickness : 9mm / 0.4 Inch
Size/Diameter : 40 - 70mm / 1.6 - 2.8 Inch
Each size is custom created for a uniform look and feel over all sizes.
It's quite flexible, so you can easily slide it over the hand.
If you would like a small opening in the bracelet so you can have a tighter fit, please leave a remark.
Slim version available here.
by
virtox
The elegant pair of spiral droplet earrings. With integrated loops.
I recommend to use these with silver earring hooks. (not included) These are availble at your local bijoux or jewellery store or via websites. If you have trouble finding them, contact me with a copy of your invoice and I will make sure you get a pair!
More earrings
I recommend to use these with silver earring hooks. (not included) These are availble at your local bijoux or jewellery store or via websites. If you have trouble finding them, contact me with a copy of your invoice and I will make sure you get a pair!
More earrings
by
virtox
Accused of being fake, witchcraft and simply impossible..
This kinetic sculpture is inspired by the unlimited freedom of 3d printing,
it wobbles and turns with a slight movement of the hand.
Now give it a good spin or puff of air and it erupts in erratic and wild behavior.
This is the 5cm / 2" version, see the Gyro the Forms section for other shapes and sizes.
Corner stand available separately, or get the complete set below!
NEW!
Now also available as a pendant/keyfob!
In both Extra small and Small
Instructions
It is composed of four concentric cubes, each one spinning around a different axis.
The model needs some minor assembly:
Each inner cube has two knobs which need to be placed into the corresponding clamps in the parent cube. It's easiest to start with the inner most and continue outward.
And then... spin it away !
Notes
Do not be alarmed if your cube will not run smoothly at first!
Because of minor variations as a result of the printing process,
some need to wear in a little but will loosen up very quickly.
In the example video I am blowing on it to make it move, it's that smooth.
Be a little careful with (the assembly of) the Alumide version as this material is slightly less flexible/robust than the Strong & Flexible materials.
Get a complete set.
A default set consists of an Alumide Gyro the Cube and a White stand, you can change the materials in your cart later.
+ 
This kinetic sculpture is inspired by the unlimited freedom of 3d printing,
it wobbles and turns with a slight movement of the hand.
Now give it a good spin or puff of air and it erupts in erratic and wild behavior.
This is the 5cm / 2" version, see the Gyro the Forms section for other shapes and sizes.
Corner stand available separately, or get the complete set below!
NEW!
Now also available as a pendant/keyfob!
In both Extra small and Small
Instructions
It is composed of four concentric cubes, each one spinning around a different axis.
The model needs some minor assembly:
Each inner cube has two knobs which need to be placed into the corresponding clamps in the parent cube. It's easiest to start with the inner most and continue outward.
And then... spin it away !
Notes
Do not be alarmed if your cube will not run smoothly at first!
Because of minor variations as a result of the printing process,
some need to wear in a little but will loosen up very quickly.
In the example video I am blowing on it to make it move, it's that smooth.
Be a little careful with (the assembly of) the Alumide version as this material is slightly less flexible/robust than the Strong & Flexible materials.
Get a complete set.
A default set consists of an Alumide Gyro the Cube and a White stand, you can change the materials in your cart later.
+ 
by
virtox
Evolutionary bowl
Meet Adam, please check out the video above!.
(Polished) Strong & Flexible :-)
11.8cm / 4.6" in diameter
Meet Adam, please check out the video above!.
(Polished) Strong & Flexible :-)
11.8cm / 4.6" in diameter
by
virtox
Two stranded spirals, finding their way back together.
A bendy and trippy decorative piece designed for the Strong & Flexible materials.
Limited edition, sold out.
Photographs don't do it justice, it's an eye-catching treat for the senses.
Check out the video!
A bendy and trippy decorative piece designed for the Strong & Flexible materials.
Limited edition, sold out.
Photographs don't do it justice, it's an eye-catching treat for the senses.
Check out the video!
by
virtox
Temporarily offline
Interlocked cubes form a playful and delicate chain.
This unique eye-catcher will keep you distracted all day long :-)
Check out the excellent video below, courtesy of freakinhuge!
Available in : white, black, indigo, red and grey.
(Shown on the photo is an alumide sample, currently not available.)
Specifications :
Thickness : 12mm/0.5 Inch.
Chain length : 14-22cm/8.7 Inch. (+/-5%)
Inner diameter : 4.5-6.3 cm/1.7-2.5 inch.
Matching necklace available.
More delicate versions are available in 6 mm or 8mm
This unique eye-catcher will keep you distracted all day long :-)
Check out the excellent video below, courtesy of freakinhuge!
Available in : white, black, indigo, red and grey.
(Shown on the photo is an alumide sample, currently not available.)
Specifications :
Thickness : 12mm/0.5 Inch.
Chain length : 14-22cm/8.7 Inch. (+/-5%)
Inner diameter : 4.5-6.3 cm/1.7-2.5 inch.
Matching necklace available.
More delicate versions are available in 6 mm or 8mm
by
virtox
Write your name or message in Morse code.
Hiding it in plain sight.
You can choose up to four characters to be morsified.
Please enter the ring diameter in millimeters
Ring width is 5 mm and a thickness of 1.5 mm.
Ring size up to 22mm, if your need a x.5 mm size, please enter the size in the "remark field.
If you need more characters, want something bigger or more customized, please send me a message.
Hiding it in plain sight.
You can choose up to four characters to be morsified.
Please enter the ring diameter in millimeters
Ring width is 5 mm and a thickness of 1.5 mm.
Ring size up to 22mm, if your need a x.5 mm size, please enter the size in the "remark field.
If you need more characters, want something bigger or more customized, please send me a message.
by
virtox
Two separate but interlocked gyroid shapes
Together they form an intricate candle stand.
Suitable for candles 20-22mm diameter
Safety warning :
Please do not let the flame get to close to the material.
Best is to wrap the bottom part of the candle in a few layers of aluminum foil.
Together they form an intricate candle stand.
Suitable for candles 20-22mm diameter
Safety warning :
Please do not let the flame get to close to the material.
Best is to wrap the bottom part of the candle in a few layers of aluminum foil.
by
virtox
Curley alien, escaped from it's pendant.
Actually it is a posed "character" from a short animation I made :
http://www.youtube.com/watch?v=GFCem6JfisY
WSF tested, others available per request
Actually it is a posed "character" from a short animation I made :
http://www.youtube.com/watch?v=GFCem6JfisY
WSF tested, others available per request
by
virtox
This pair of loosely entangled bracelets is based on Gyroid bones.
A very elegant variation on the mathematical equation.
This is the slim version
Width : 14mm / 0.6 Inch
Thickness : 9mm / 0.4 Inch
Size/Diameter : 40 - 70mm / 1.6 - 2.8 Inch
Each size is custom created for a uniform look and feel over all sizes.
It's quite flexible, so you can easily slide it over the hand.
If you would like a small opening in the bracelet so you can have a tighter fit, please leave a remark.
Broad version available here.
A very elegant variation on the mathematical equation.
This is the slim version
Width : 14mm / 0.6 Inch
Thickness : 9mm / 0.4 Inch
Size/Diameter : 40 - 70mm / 1.6 - 2.8 Inch
Each size is custom created for a uniform look and feel over all sizes.
It's quite flexible, so you can easily slide it over the hand.
If you would like a small opening in the bracelet so you can have a tighter fit, please leave a remark.
Broad version available here.
by
virtox
A pair of mirror pendants from the evolutionary series.
Use them as earrings or share one with someone special/a listener.
I recommend to use these with silver earring hooks and attach them with (7mm) split rings (not included) These are availble at your local bijoux or jewellery store or via websites. If you have trouble finding them, contact me with a copy of your invoice and I will make sure you get a pair!
Size of each twin-shell excluding the ring is 27 x 18 x 6 mm.
More earrings
Use them as earrings or share one with someone special/a listener.
I recommend to use these with silver earring hooks and attach them with (7mm) split rings (not included) These are availble at your local bijoux or jewellery store or via websites. If you have trouble finding them, contact me with a copy of your invoice and I will make sure you get a pair!
Size of each twin-shell excluding the ring is 27 x 18 x 6 mm.
More earrings
by
virtox
A gyroid bone ring.
Each ring is separately created for the specified size, to create a uniform look across all sizes.
All sizes/models are thoroughly checked before being sent to the printer.
To determine your ring size:
1. Wrap a piece of string or a strip of paper around the thickest part of your finger.
2. Note the point where the string start to overlap.
3. Measure the length of a single winding to get the circumference of your finger.
4. In case of measurement in Inches : Multiply by 25.4 to go to mm.
5. Divide by 3.14 (=Pi) to get your ring diameter in mm.
More rings
Pendants
Bracelets
Each ring is separately created for the specified size, to create a uniform look across all sizes.
All sizes/models are thoroughly checked before being sent to the printer.
To determine your ring size:
1. Wrap a piece of string or a strip of paper around the thickest part of your finger.
2. Note the point where the string start to overlap.
3. Measure the length of a single winding to get the circumference of your finger.
4. In case of measurement in Inches : Multiply by 25.4 to go to mm.
5. Divide by 3.14 (=Pi) to get your ring diameter in mm.
More rings
Pendants
Bracelets
by
virtox
While provocatively curved, she is indeed very shy!
She only allows a glowing glimpse of what she holds inside.
A light shade for LED tea-light or Luxeon/Cree LED
Hiding the source from direct view, resulting in a gentle light emerging
Limited edition
This is the original design, at nearly 20cm high, with 2mm thick walls it is costly to produce.
To compensate, only ten will be produced, currently only six are still available
More
Other sizes and shapes available.
She only allows a glowing glimpse of what she holds inside.
A light shade for LED tea-light or Luxeon/Cree LED
Hiding the source from direct view, resulting in a gentle light emerging
Limited edition
This is the original design, at nearly 20cm high, with 2mm thick walls it is costly to produce.
To compensate, only ten will be produced, currently only six are still available
More
Other sizes and shapes available.
by
virtox
The hip bone connects to the gyroid bone ?
The gyroid bone, another wonder of nature and mathematics.
Tested in WSF, but I left all material options open for the daring.
The gyroid bone, another wonder of nature and mathematics.
Tested in WSF, but I left all material options open for the daring.
Shop Details
Expertise
- Designer
- Artist
- Maker
Shop Sections
- All Sections
- Atomic
- Ceramics
- Christmas
- Coded Rings
- Coffee Not Included
- Cubichain
- Current
- Decorative
- Dutch Design Week
- Eardrops
- Evolutionary
- Fractal Explorations
- Full Color
- Gyro the Cube
- Gyro the Dodo
- Gyro the Forms
- Gyroid Explorations
- Invertebrates
- Jewelry
- Jewelry - Bracelets
- Jewelry - Earrings
- Jewelry - Necklaces
- Jewelry - Pendants
- Jewelry - Rings
- Julia Vase Iterations
- Lighting
- Menger Beads
- Quarks
- Sculptures
- Sculptures - Evolutionary
- Sculptures - Invertebrates
- Vishal
- X-math
