|
Exploring and creating the (im)possible through the magic of 3d printing.
Here you can find original Art and Design in a variety of fields and materials. Check out the latest models here or browse by category: |
|||
| Jewelry | Gyro the Forms | Sculptures | Decorative |
|
Bracelets Earrings Pendants Rings Necklaces |
Gyro the Cube Gyro the Dodo |
Evolutionary Invertebrates Gyroid Exploration Fractal Exploration |
Lighting Ceramics |
|
To stay updated, follow Virtox on Tumblr, Facebook, Twitter, Youtube or Flickr
|
|||
virtox is selling 3 products in 2119 section
by
virtox
Dodecahedral sibling of Gyro the Cube.
Same principle, more faces, more rings and more fun ;-)
Made of five nested dodecahedra, each one is limited to rotate about it's own axis.
This is the 6.5cm / 2.5" version, see the Gyro the Forms
Experimental corner stand available here
Instructions
For tighter clearances it is printed with the hinges out of place. So this model needs a little manual assembly. Each element has two "knobs" which need to be "clicked" into the corresponding "clamps" in the parent element.
It's easiest to start with the inner one and then continue outwards.
And then... rotate away !
Same principle, more faces, more rings and more fun ;-)
Made of five nested dodecahedra, each one is limited to rotate about it's own axis.
This is the 6.5cm / 2.5" version, see the Gyro the Forms
Experimental corner stand available here
Instructions
For tighter clearances it is printed with the hinges out of place. So this model needs a little manual assembly. Each element has two "knobs" which need to be "clicked" into the corresponding "clamps" in the parent element.
It's easiest to start with the inner one and then continue outwards.
And then... rotate away !
by
virtox
Dodecahedral sibling of Gyro the Cube (L).
Same principle, more faces, more rings and more fun ! :-)
Made of five nested dodecahedra, each one is limited to rotate about it's own axis.
This is the 9cm / 3.5" version.
It's easiest to start with the inner one and then continue outwards.
And then... rotate away !
Note, Please be careful with the assembly of the Alumide version as this material is less flexible than the others.
Gyro the Cube
$ 25.00 (Excl vat)
$ 29.75 (Inc vat) Gyro the Dodo
$ 30.00 (Excl vat)
$ 35.70 (Inc vat) Gyro the Cube (L)
$ 75.00 (Excl vat)
$ 89.25 (Inc vat) Gyro the Dodo (L)
$ 80.00 (Excl vat)
$ 95.20 (Inc vat)
Same principle, more faces, more rings and more fun ! :-)
Made of five nested dodecahedra, each one is limited to rotate about it's own axis.
This is the 9cm / 3.5" version.
Instructions
For tighter clearances it is printed with the hinges out of place. So this model needs a little manual assembly. Each element has two "knobs" which need to be "clicked" into the corresponding "clamps" in the parent element.It's easiest to start with the inner one and then continue outwards.
And then... rotate away !
Note, Please be careful with the assembly of the Alumide version as this material is less flexible than the others.
Also available
Gyro the Cube$ 25.00 (Excl vat)
$ 29.75 (Inc vat) Gyro the Dodo
$ 30.00 (Excl vat)
$ 35.70 (Inc vat) Gyro the Cube (L)
$ 75.00 (Excl vat)
$ 89.25 (Inc vat) Gyro the Dodo (L)
$ 80.00 (Excl vat)
$ 95.20 (Inc vat)
by
virtox
Dodecahedral sibling of Gyro the Cube (XL).
Same principle, more faces, more rings and more fun ! :-)
Made of five nested dodecahedra, each one is limited to rotate about it's own axis.
This is the 9cm / 3.5" version.
Please be careful with a gyro this size, fingers may get pinched if put between the (moving) rings, so handle with care!
It's easiest to start with the inner one and then continue outwards.
And then... spin it away !
Gyro the Cube
$ 25.00 (Excl vat)
$ 29.75 (Inc vat) Gyro the Dodo
$ 30.00 (Excl vat)
$ 35.70 (Inc vat) Gyro the Cube (L)
$ 75.00 (Excl vat)
$ 89.25 (Inc vat) Gyro the Dodo (L)
$ 80.00 (Excl vat)
$ 95.20 (Inc vat)
Same principle, more faces, more rings and more fun ! :-)
Made of five nested dodecahedra, each one is limited to rotate about it's own axis.
This is the 9cm / 3.5" version.
Please be careful with a gyro this size, fingers may get pinched if put between the (moving) rings, so handle with care!
Instructions
For tighter clearances it is printed with the hinges out of place. So this model needs a little manual assembly. Each element has two "knobs" which need to be "clicked" into the corresponding "clamps" in the parent element.It's easiest to start with the inner one and then continue outwards.
And then... spin it away !
Also available
Gyro the Cube$ 25.00 (Excl vat)
$ 29.75 (Inc vat) Gyro the Dodo
$ 30.00 (Excl vat)
$ 35.70 (Inc vat) Gyro the Cube (L)
$ 75.00 (Excl vat)
$ 89.25 (Inc vat) Gyro the Dodo (L)
$ 80.00 (Excl vat)
$ 95.20 (Inc vat)
Shop Details
Expertise
- Designer
- Artist
- Maker
Shop Sections
- All Sections
- Atomic
- Ceramics
- Christmas
- Coded Rings
- Coffee Not Included
- Cubichain
- Current
- Decorative
- Dutch Design Week
- Eardrops
- Evolutionary
- Fractal Explorations
- Full Color
- Gyro the Cube
- Gyro the Dodo
- Gyro the Forms
- Gyroid Explorations
- Invertebrates
- Jewelry
- Jewelry - Bracelets
- Jewelry - Earrings
- Jewelry - Necklaces
- Jewelry - Pendants
- Jewelry - Rings
- Julia Vase Iterations
- Lighting
- Menger Beads
- Quarks
- Sculptures
- Sculptures - Evolutionary
- Sculptures - Invertebrates
- Vishal
- X-math
