|
Exploring and creating the (im)possible through the magic of 3d printing.
Here you can find original Art and Design in a variety of fields and materials. Check out the latest models here or browse by category: |
|||
| Jewelry | Gyro the Forms | Sculptures | Decorative |
|
Bracelets Earrings Pendants Rings Necklaces |
Gyro the Cube Gyro the Dodo |
Evolutionary Invertebrates Gyroid Exploration Fractal Exploration |
Lighting Ceramics |
|
To stay updated, follow Virtox on Tumblr, Facebook, Twitter, Youtube or Flickr
|
|||
We found 137 products by virtox
by
virtox
Mount this part on a high airflow 80mm PC-fan.
Click your Gyro the Cube in the Center.
Watch it move on its own :-)
Please Note!
Fan and grills not included!
It works best if the first axles on the cube is aligned vertically.
The motion produced by this is not (yet) very interesting.
But after tinkering with this for a very long time, I owe it to the fans to pre-release it.
Thank you for your patience.
Use fan grill on both side of your fan to prevent injuries!
Make sure the Gyro the Cube is mounted tightly before applying power to the fan!
Use ate your own risk!
If you don't know what you are doing, then PLEASE DON'T!
To control motion use a PWM controller for your fan.
Click your Gyro the Cube in the Center.
Watch it move on its own :-)
Please Note!
Fan and grills not included!
It works best if the first axles on the cube is aligned vertically.
The motion produced by this is not (yet) very interesting.
But after tinkering with this for a very long time, I owe it to the fans to pre-release it.
Thank you for your patience.
Use fan grill on both side of your fan to prevent injuries!
Make sure the Gyro the Cube is mounted tightly before applying power to the fan!
Use ate your own risk!
If you don't know what you are doing, then PLEASE DON'T!
To control motion use a PWM controller for your fan.
by
virtox
Temporarily offline while I tweak it slightly!
Send me a message if you would like to stay updated!
Gyro the Cube (S)
(Version with loop >> here)
As with the original the cubes the hinges need to be put in place after you receive it.
And as this is are quite small, this might be a bit fidgety.
I will work on some instructions/tips.
Send me a message if you would like to stay updated!
Gyro the Cube (S)
(Version with loop >> here)
As with the original the cubes the hinges need to be put in place after you receive it.
And as this is are quite small, this might be a bit fidgety.
I will work on some instructions/tips.
by
virtox
Julia Vase 002 Flow
Flow, an easy and relaxed, not too intrusive centerpiece.
This dry flower vase was derived from the Julia Fractal Set.
Instead of high iteration full color imagery as is common, one can also trace a line over the lower iterations.
Then by slowly altering the input values, we are morphing the fractal while traveling the Z-axis.
And beautiful and elegant forms appear.
Circa 12.5 cm high with 1mm thick walls, this is suitable for all Strong & Flexible materials.
I recommend the polished.
Part of the Julia Vase collection.
Flow, an easy and relaxed, not too intrusive centerpiece.
This dry flower vase was derived from the Julia Fractal Set.
Instead of high iteration full color imagery as is common, one can also trace a line over the lower iterations.
Then by slowly altering the input values, we are morphing the fractal while traveling the Z-axis.
And beautiful and elegant forms appear.
Circa 12.5 cm high with 1mm thick walls, this is suitable for all Strong & Flexible materials.
I recommend the polished.
Part of the Julia Vase collection.
by
virtox
Julia Vase 003 - Roots
A delicately balancing shape, tension.. will it fall?
This dry flower vase was derived from the Julia Fractal Set.
Instead of high iteration full color imagery as is common, one can also trace a line over the lower iterations.
Then by slowly altering the input values, we are morphing the fractal while traveling the Z-axis.
And beautiful and elegant forms appear.
Circa 12.5 cm high with 1mm thick walls, this is suitable for all Strong & Flexible materials.
I recommend the polished.
Part of the Julia Vase collection.
A delicately balancing shape, tension.. will it fall?
This dry flower vase was derived from the Julia Fractal Set.
Instead of high iteration full color imagery as is common, one can also trace a line over the lower iterations.
Then by slowly altering the input values, we are morphing the fractal while traveling the Z-axis.
And beautiful and elegant forms appear.
Circa 12.5 cm high with 1mm thick walls, this is suitable for all Strong & Flexible materials.
I recommend the polished.
Part of the Julia Vase collection.
by
virtox
Temporarily offline while I tweak it slightly!
Send me a message if you would like to stay updated!
Gyro the Cube (XS) with loop.
Sized at 2.5cm/1" this makes for a fiddly, yet subtle keyfob or pendant.
Or get a pair as earrings!
As with the original the cubes the hinges need to be put in place after you receive it.
And as this is really tiny, this might be a bit fidgety ;-).
I will work on some instructions/tips.
Larger pendant here
Send me a message if you would like to stay updated!
Gyro the Cube (XS) with loop.
Sized at 2.5cm/1" this makes for a fiddly, yet subtle keyfob or pendant.
Or get a pair as earrings!
As with the original the cubes the hinges need to be put in place after you receive it.
And as this is really tiny, this might be a bit fidgety ;-).
I will work on some instructions/tips.
Larger pendant here
by
virtox
A triple gyroid sphere.
3 seperate parts interlocked.
Part of inside removed to save material.
Currently only a single color placeholder, color uploads are giving me trouble atm.
3 seperate parts interlocked.
Part of inside removed to save material.
Currently only a single color placeholder, color uploads are giving me trouble atm.
by
virtox
This is the corner stand for the XL 10cm Gyro the Cube model.
It should have enough clearance to easily place and pick-up the Cube.
This is a solid version and uses quite a lot of material.
I will try to improve the amount of material used, to reduce the price a bit, but this may negatively affect stability.
The stand has been tested on a home printer and this works nicely.
The Shapewqays print should be the same/better, I will be testing that soon.
It should have enough clearance to easily place and pick-up the Cube.
This is a solid version and uses quite a lot of material.
I will try to improve the amount of material used, to reduce the price a bit, but this may negatively affect stability.
The stand has been tested on a home printer and this works nicely.
The Shapewqays print should be the same/better, I will be testing that soon.
by
virtox
This is the corner stand for the L 7.5cm Gyro the Cube model.
It should have enough clearance to easily place and pick-up the Cube.
This is a solid version and uses quite a lot of material.
I will try to improve the amount of material used, to reduce the price a bit, but this may negatively affect stability.
To be tested.
It should have enough clearance to easily place and pick-up the Cube.
This is a solid version and uses quite a lot of material.
I will try to improve the amount of material used, to reduce the price a bit, but this may negatively affect stability.
To be tested.
by
virtox
Running in Circles
A pair of large hypnotic earrings.
Inspired by ripple patterns in water.
Where one ripple ends, another begins.
Passing each other without interfering.
This is the Extra Large size.
Diameter of largest circle is 65mm, total height for one is 75mm.
Suitable for all Strong & Flexible materials.
Silver earrings hooks (not yet) included!
Also available in Large, Medium and Small
A pair of large hypnotic earrings.
Inspired by ripple patterns in water.
Where one ripple ends, another begins.
Passing each other without interfering.
This is the Extra Large size.
Diameter of largest circle is 65mm, total height for one is 75mm.
Suitable for all Strong & Flexible materials.
Silver earrings hooks (not yet) included!
Also available in Large, Medium and Small
by
virtox
Inspired by all the I-design, I opted for something a little different:
Meet the Universal Wrist Device, made from U's for you.
Turn any phone into a wrist-mounted device!
Yes, finally a real com-device like the ones pictured in Sci-fi! ;-)
Arbitrary rotation of the device, use your device in portrait or landscape mode.
An Ideal way to keep the phone nearby but your hands free.
Comes in handy during hiking and biking, but also in your work-shop or kitchen.
The model is printed as two parts that click together.
And both are customizable for their own purpose!
Eh, what?
Well, currently shown:
A wrist clip and the holder for my phone; a SE Vivaz.
The phone can easily be turned to landscape or portrait mode.
But the wrist clip could be tailored to your wrist. And the holder to your phone !
So do you have a phone starting with an I or something completely different?
No worries, U can design your own clip :-)
(more info on this later)
But wait, you don't need a wrist clip, but something different?
To clip onto your bicycle, car, cat, wife?
Anything is possible !
(more info on this later)
The current coupling design should easily click into place.
It has enough resistance to stay put, but allows the device to be rotated to an arbitrary position.
But why?
Because I needed something like this :-)
Meet the Universal Wrist Device, made from U's for you.
Turn any phone into a wrist-mounted device!
Yes, finally a real com-device like the ones pictured in Sci-fi! ;-)
Arbitrary rotation of the device, use your device in portrait or landscape mode.
An Ideal way to keep the phone nearby but your hands free.
Comes in handy during hiking and biking, but also in your work-shop or kitchen.
The model is printed as two parts that click together.
And both are customizable for their own purpose!
Eh, what?
Well, currently shown:
A wrist clip and the holder for my phone; a SE Vivaz.
The phone can easily be turned to landscape or portrait mode.
But the wrist clip could be tailored to your wrist. And the holder to your phone !
So do you have a phone starting with an I or something completely different?
No worries, U can design your own clip :-)
(more info on this later)
But wait, you don't need a wrist clip, but something different?
To clip onto your bicycle, car, cat, wife?
Anything is possible !
(more info on this later)
The current coupling design should easily click into place.
It has enough resistance to stay put, but allows the device to be rotated to an arbitrary position.
But why?
Because I needed something like this :-)
by
virtox
Member of the Evolutionary family.
A twin-shell model with two female sides.
Free shipping worldwide !
http://www.shapeways.com/shops/virtox§ion=Evolutionary
A twin-shell model with two female sides.
Free shipping worldwide !
http://www.shapeways.com/shops/virtox§ion=Evolutionary
Shop Details
Expertise
- Designer
- Artist
- Maker
Shop Sections
- All Sections
- Atomic
- Ceramics
- Christmas
- Coded Rings
- Coffee Not Included
- Cubichain
- Current
- Decorative
- Dutch Design Week
- Eardrops
- Evolutionary
- Fractal Explorations
- Full Color
- Gyro the Cube
- Gyro the Dodo
- Gyro the Forms
- Gyroid Explorations
- Invertebrates
- Jewelry
- Jewelry - Bracelets
- Jewelry - Earrings
- Jewelry - Necklaces
- Jewelry - Pendants
- Jewelry - Rings
- Julia Vase Iterations
- Lighting
- Menger Beads
- Quarks
- Sculptures
- Sculptures - Evolutionary
- Sculptures - Invertebrates
- Vishal
- X-math
