Tofty is selling 26 products in Gadgets section
by
Tofty
This is the second version of my small keychain tritium lantern for use with a 3x22.5mm tritium vial (tritium vial not included) and does not requi...
by
Tofty
This is a small keychain tritium lantern for use with a 3x22.5mm tritium vial (tritium vial not included).As well as the tritium vial, a clear plas...
by
Tofty
This is a small keychain tritium lantern for use with a 3x22.5mm tritium vial (tritium vial not included).
This model has been scaled for printing ...
by
Tofty
This is the fifth version of my small keychain tritium lantern for use with a 3x22.5mm tritium vial (tritium vial not included) and does not requir...
by
Tofty
This is the fifth version of my small keychain tritium lantern for use with a 3x22.5mm tritium vial (tritium vial not included) and does not requir...
by
Tofty
I present my single-piece prybar and nail lifting tool.
It comes with:
A range of metric hex drivers (5.5, 6, 7 and 8mm),
A bottle opener,
A 1/4" h...
by
Tofty
I present my one-piece driver/spanner tool with a variety of different driver points:
6.5 x 1.2mm flat driver,
No.2 posidriv driver,
5mm hex drive...
by
Tofty
I present my second one-piece driver/spanner tool with a variety of different driver points.
This tool is designed to accept the carrying of eithe...
by
Tofty
I present this 3" long prying tool, designed by myself and several other members of the Multitool.org forum.
This tool is officially sanctioned by ...
by
Tofty
I present this 3" long prying tool, designed my myself and several other members of the Multitool.org forum.
This tool is officially sanctioned by ...
by
Tofty
This is my single-piece spanner/wrench tool with a range of metric hex nut drivers (5, 5.5, 7, 8, 10, 13 and 17mm) and a 1/4" hex bit driver.
An o-...
by
Tofty
I present the base section of my two or three piece bicycle tool set.
Specs:
15mm open ended pedal spanner,
14mm spanner,
12mm spanner,
9mm spanne...
by
Tofty
I present the T-Bar hex bit driver tool, a commissioned piece for JLara.
It's features include:
A prying tip,
An in-line 1/4" hex bit driver,
4 mor...
by
Tofty
I present my sprued model of four 25mm long 1/4" hex insert driver bits.
Two of the bits have a No.2 Phillips-style driver profile (PH2) while the ...
by
Tofty
This is a small two part AAA LED torch (flashlight) host.The internals needed are from an MXDL 3W Luxeon LED light (shown in one of the pictures).
...
by
Tofty
This is the forth version of my small keychain tritium lantern for use with a 3x22.5mm tritium vial (tritium vial not included) and does not requir...
by
Tofty
This is the forth version of my small keychain tritium lantern for use with a 3x22.5mm tritium vial (tritium vial not included) and does not requir...
by
Tofty
This is the third version of my small keychain tritium lantern for use with a 3x22.5mm tritium vial (tritium vial not included) and does not requir...
by
Tofty
I present my triple tritium decorative bead, designed to take three of the 2.5x10mm tritium vials (tritium vials not included).
The central hole is...
by
Tofty
Small pedal shaped tritium vial holding decorative bead with large side cut-outs, designed to take two of the 2.5x10mm tritium vials (tritium vials...
by
Tofty
A small keychain survival whistle which emits a clear and sharp sound.This whistle is of single-piece design and therefore does not need the small ...
by
Tofty
Ever been fed up with the computer mouse cord getting snagged and tangled as it falls loose down the back of the desk?
If so this is my solution; a...
by
Tofty
Bead B designed for Tyler.
It accepts one of the 2x6mm tritium vials (tritium vial not included).
The central pin is 4mm in diameter and 3.5mm lon...
by
Tofty
Bead D designed for Tyler.
It accepts two of the 2x6mm tritium vials (tritium vials not included).
The central pin is 4mm in diameter and 3.5mm lo...
by
Tofty
Bead A designed for Tyler.
It accepts three of the 1.55x5mm tritium vials (tritium vials not included).
The central pin is 4mm in diameter and 3.5...
by
Tofty
Bead C designed for Tyler.
It accepts three of the 2x6mm tritium vials (tritium vials not included).
The central pin is 4mm in diameter and 3.5mm ...
Shop Details
This is my shop for some of the EDC (every day carry) items, Torches (flashlights) and functional jewellery that i have designed.
I hope to prove that this kind of 3D printing can be used for functional objects as well as cosmetic ones.
I hope you like my work so far and find it of interest.
If you have any comments or changes that you feel would benefit any of my models for your purposes let me know and i can see if they are inplementable.
Cheers,
Tofty
Expertise
- 3D modeler
- Designer
- Product designer
- Maker
Shop Sections
