The Magic Shop offers a wide range of original dice, some geometrical jewelry and a few strange objects.
The dice are from different families like the Average Dice where you must sum the numbers appearing on the top face, the Truncated Sphere Dice, intersection of a polyhedron with a sphere and some other original creations.
The jewelry includes Double Marble Pendant, Dod Earrings and Dod Pendants, Reversible Bracelets as well as some unusual rings.
Finally, some objects are difficult to classify, for example the Hexbox, the Cup Holder or the MegaWireSphere.
Magic is selling 29 products in Jewelry section
by
Magic
The Ring'n'Roll is made of two portions of spheres, one inside the other. The outer ring can turn freely around the inner one.
The internal diameter is 20 mm (ask me if you need other dimensions). The inner ring can turn inside the outer shell (the clearance between the ring is 0.75mm, the thickness of each ring is 2 mm)
SUCESSFULLY PRINTED in Alumide. Unfortunatelly Metal is not possible (movable parts). A version with holes (less expensive) is also available.
Very very addictive...
The internal diameter is 20 mm (ask me if you need other dimensions). The inner ring can turn inside the outer shell (the clearance between the ring is 0.75mm, the thickness of each ring is 2 mm)
SUCESSFULLY PRINTED in Alumide. Unfortunatelly Metal is not possible (movable parts). A version with holes (less expensive) is also available.
Very very addictive...
by
Magic
The Happy Event Bead is similar the the Hollow Marble.
The difference is that it has slightly bigger holes (3 mm instead of 2.5) and these holes are not centered, so that the bead always shows the same side: this marble is intended to be used as a bead on a necklace without any holder (just insert the necklace into one hole and make it exit from the other one).
In this way, you can make a necklace with one bead for each significant event of your life (your own birth, your graduation, your wedding, etc. but it is mainly intended for the birth of your children).
Read this message for more information.
Suggestion for the Mother Day: offer to your wife a bead with the picture of your children on one side and a text saying "Happy Mother Day 2011" on the other side!
Necklace not included.
The difference is that it has slightly bigger holes (3 mm instead of 2.5) and these holes are not centered, so that the bead always shows the same side: this marble is intended to be used as a bead on a necklace without any holder (just insert the necklace into one hole and make it exit from the other one).
In this way, you can make a necklace with one bead for each significant event of your life (your own birth, your graduation, your wedding, etc. but it is mainly intended for the birth of your children).
Read this message for more information.
Suggestion for the Mother Day: offer to your wife a bead with the picture of your children on one side and a text saying "Happy Mother Day 2011" on the other side!
Necklace not included.
by
Magic
Sorry, I am currently travelling. No customisation is possible until April...
The Hollow Marble is a 7/8" (22 mm) hollow sphere with 2 holes at the poles.
Thickness is 3 mm.
Read this post for more information.
The Hollow Marble is a 7/8" (22 mm) hollow sphere with 2 holes at the poles.
Thickness is 3 mm.
Read this post for more information.
by
Magic
Sorry, I am currently travelling. No customisation is possible until April...
The Solid Marble is a sphere of 7/8" (22 mm).
A Do It Yourself version is also available with no markup!
Read this post for more information.
The Solid Marble is a sphere of 7/8" (22 mm).
A Do It Yourself version is also available with no markup!
Read this post for more information.
by
Magic
The Big Marble Pendant turns a 7/8" marbles (22 mm) into a pendant.
Read this post for more information.
Marble and necklace not included.
Read this post for more information.
Marble and necklace not included.
by
Magic
Big Marble Pendant v3
For 7/8" marbles (22 mm).
Read this post for more information.
Marble and necklace not included.
For 7/8" marbles (22 mm).
Read this post for more information.
Marble and necklace not included.
by
Magic
Earth Pendant
A pendant to support a Earth marble (7/8"=22 mm) with 2 holes at the poles. The incliniason of the pendant is the one of Earth.
Read this post for more information.
Earth marble and necklace not included.
A pendant to support a Earth marble (7/8"=22 mm) with 2 holes at the poles. The incliniason of the pendant is the one of Earth.
Read this post for more information.
Earth marble and necklace not included.
by
Magic
A cage to turn a 7/8" marble into a keychain. The cage is to be closed with a keyring.
This is the redesigned version: the two parts are now identical, and there is more room to make the mable roll freely.
Unfortunately, due to moving parts, this model cannot be printed in Metal anymore.
Read this post for more information.
This is the redesigned version: the two parts are now identical, and there is more room to make the mable roll freely.
Unfortunately, due to moving parts, this model cannot be printed in Metal anymore.
Read this post for more information.
by
Magic
The Marble Cage is a cage to turn a 7/8" marble into a keychain.
The cage is to be closed with a keyring.
Unfortunately, due to moving parts, this model cannot be printed in Metal anymore.
Read this post for more information
A new version is also available.
Marble, keyring or necklace not included.
The cage is to be closed with a keyring.
Unfortunately, due to moving parts, this model cannot be printed in Metal anymore.
Read this post for more information
A new version is also available.
Marble, keyring or necklace not included.
by
Magic
Marble Pendant v2
A variation of the double marble pendant. Marbles must be 16 mm (5/8"). SUCCESSFULLY PRINTED.
NEW VERSION! The actual model is slightly different from the one in the picture: the ring for the necklace is oriented at 45° to offer a better view of the shape.
Be careful: this version is quite loose compared to the other designs of the marble pendants (but it is also the less expensive :-)
Marbles and necklace not included.
A variation of the double marble pendant. Marbles must be 16 mm (5/8"). SUCCESSFULLY PRINTED.
NEW VERSION! The actual model is slightly different from the one in the picture: the ring for the necklace is oriented at 45° to offer a better view of the shape.
Be careful: this version is quite loose compared to the other designs of the marble pendants (but it is also the less expensive :-)
Marbles and necklace not included.
by
Magic
Double Marble Pendant
Pendant composed of three parts, on which you have to insert 2 marbles (diameter 16 mm = 5/8").
SUCCESSFULLY PRINTED.
UPDATED MODEL: the ring is now turned at 45° and the model is smoother.
More informations here.
Marbles and necklace not included.
Pendant composed of three parts, on which you have to insert 2 marbles (diameter 16 mm = 5/8").
SUCCESSFULLY PRINTED.
UPDATED MODEL: the ring is now turned at 45° and the model is smoother.
More informations here.
Marbles and necklace not included.
by
Magic
The Brunnian Pendant is a small version of the Brunnian Circles initially intended to be printed in Stainless Steel as a pendant. Unfortunately moving parts are no more allowed in Metal.
The diameter of the threads is 2 mm. The clearance between the rings is 1 mm.
Note that when hanged, the rings are a bit loose because of the necessary clearance (see the picture).
The diameter of the threads is 2 mm. The clearance between the rings is 1 mm.
Note that when hanged, the rings are a bit loose because of the necessary clearance (see the picture).
Shop Details
Expertise
- 3D modeler
- Designer
Shop Sections
- All Sections
- Boxes
- Co-creators
- Dice
- Dice - Ordinary number of faces
- Dice - Unusual number of faces
- Dice - Unusual numbering
- Glazed Ceramics
- Jewelry
- Jewelry - Bracelets
- Jewelry - Earrings
- Jewelry - Marble holders
- Jewelry - Marbles
- Jewelry - Pendants
- Jewelry - Rings
- Maths
- Maths - Brunnian Links
- Maths - Others
- Networks
- New
- Others
- Sales
- Table settings
- Table settings - Others
- Top Sellers
- Truncated Sphere Dice
