A d10 Spinner based on the ''d1000 Spinner'' design http://www.shapeways.com/model/159641/__d1000_spinner___limited_collectors_edition.html?gid=ug46856

NOTE: No assembly, trimming or further enhancement required.

A d6 original design with characters and numbers. The sides depict various die rolls (d4, d6, d8, d10, d12 and d20). You roll the Diecider to decide what die to roll!

The die is hollow but not all the way through. There should be an opening on the d10 symbol. This way you can fill the symbols with some colored substance of your choosing, for a more aesthetically pleasing result!

A d8 original design with numbers.

Warning: I have not printed and tested it yet! The die was remodeled and updated.

A d6 hollow design with numbers.
This d6 rolls far and away, thanks to its semi-spherical surface.
Appropriate for making the most important rolls in your game even more intense!

A d4 original design with numbers.

A d8 original design with numbers. Updated with the numbers placed properly.

A d2 hollow design with numbers.
Thought you could never ''roll'' a d2? Always spinning a coin to make a decision? No more.
Now you can roll for a 50% chance.
Updated to improve printing properties.

Warning: I have not printed and tested it yet!

A d4 hollow design with numbers.
This d4 rolls far and away, thanks to its semi-spherical surface.
Appropriate for making the most important rolls in your game even more intense!

Being a gamer for many years, I was always searching for weird and uncommon dice to enhance my player’s game experience and add to my modest collection. Since then I have seen many interesting designs but none that would engage the legendary d1000, the Holy Grail of dice! Up until now, the need to roll a die with a thousand faces was usually satisfied by rolling three separate d10 dice, a cheap solution that was neither practical nor elegant.

With this in mind and even though the actual need for a d1000 is limited to large probability tables, the fact that there has never been a physical manifestation of this artifact, made the desire to make one irresistible. Thus was the ‘’d1000 Spinner’’ born. The spinner design was the only logical and practical solution to the problem. The intricate three-level mechanics make it possible that each level spins on its own, with different speed, so as to ensure randomness.

This is a numbered limited offer of 100 pieces, offered mainly to dedicated dice collectors. As such, a portion of those 100 pieces is already reserved. (No 3 available here.)
The rest will be available per request. Please send me a message and I will send you the product link. Price would be about $55 in White, Strong & Flexible.

Note: The final product has been updated based on observations made on the printed prototype (in WSF) you can see. The numbers have been enlarged to promote readability up to 100%, a few geometry errors were fixed, the handle shortened and the mechanics improved to allow for a more effortless spin.

WARNING! The d1000 will be printed with (4) four different parts, attached to each other. These will have to be cut, assembled and the top handle glued to the axis, if needed. Depending on the material you print, you may have to treat with sandpaper, remove any excess material and possibly add a lubricant to the contact points of the spinner axis.

A d100 Spinner based on the ''d1000 Spinner'' design http://www.shapeways.com/model/159641/__d1000_spinner___limited_collectors_edition.html?gid=ug46856

WARNING! The d100 will be printed with (3) three different parts, attached to each other. These will have to be cut, assembled and the top handle glued to the axis, if needed. Depending on the material you print, you may have to treat with sandpaper, remove any excess material and possibly add a lubricant to the contact points of the spinner axis.