Sunlink's Armory

Designs by sunlink
Contact Designer

We found 193 products by sunlink

Per Page: 12 36   View: Grid | List
Sunlink - Barrel v1 Gun x2
by sunlink
 
(0)  
  •  
From: $6.11
 
Sunlink - Double Clips Gun
by sunlink
 
(0)  
  •  
From: $6.03
 
Sunlink - Cross-bow
by sunlink
The Cross-bow was inspired and designed specifically for the Botcon 2011 themed Animated Transformers.  Twenty four specially created and brown dyed Cross-bows were handed out to attendees of the convention.  Now here's your chance to get your own Cross-bow weapon to equip your favorite robot.  It should fit any 5mm hand hole. 
 
(2)  
  •  
From: $6.71
 
Sunlink - Minderaser Gun
by sunlink
Inspired by the original G1 Mindwipe's  weapon.  This version has been designed to incorporate a 1/4 inch diameter rare earth magnet (see the hole in the bottom vertical piece) so ROTF Mindwipe can utilize it. 

Magnet is not included.
 
(0)  
  •  
From: $7.74
 
Sunlink - Barrel Gun v1.2
by sunlink
My own weapon design.  This pistol has a handle that will fit today's modern Classics / Universe Transformers that have a 5mm peg hole.
 
(0)  
  •  
From: $4.01
 
Sunlink - Minderaser v2 w/ 5mm Peg
by sunlink
Inspired by the original G1 Mindwipe's  weapon.  This version has a handle that will fit today's modern Classics / Universe Transformers that have a 5mm peg hole.
 
(0)  
  •  
From: $7.71
 
Sunlink - L-Rifle
by sunlink
My own weapon design.  This weapon has a handle that will fit today's modern Classics / Universe Transformers that have a 5mm peg hole.
 
(3)  
  •  
From: $7.48
 
Sunlink - HRod Gun
by sunlink
Inspired by the original G1 Hot Rod's  weapon.  This version has a handle that will fit today's modern Classics / Universe Transformers that have a 5mm peg hole and Classics Rodimus 4mm peg hole.
 
(2)  
  •  
From: $6.09
 
Sunlink - Gnash Gun
by sunlink
Inspired by the original G1 Gnaw's  weapon.  This version has a handle that will fit today's modern Classics / Universe Transformers that have a 5mm peg hole.
 
(2)  
  •  
From: $5.78
 
Sunlink - Groovy Gun
by sunlink
Inspired by the original G1 Groove's  weapon.  This version has a handle that will fit today's modern Classics / Universe Transformers that have a 5mm peg hole.
 
(4)  
  •  
From: $5.98
 
Sunlink - Lambo w/ 5+mm handle
by sunlink
Inspired by the original G1 Sideswipe / Red Alert weapon.  This version has a slightly larger than 5mm handle that will fit the various KO Sideswipe/Sunstreaker molds. This obviously means the handle will be too large for a normal Classics / Universe Sideswipe or Sunstreaker to use.
 
(1)  
  •  
From: $6.01
 
Sunlink - Fireflutter Gun
by sunlink
Inspired by the original G1 Fireflight's  weapon.  This version has a handle that will fit today's modern Classics / Universe Transformers that have a 5mm peg hole.
 
(1)  
  •  
From: $4.38
 
Sunlink - Blind Alley Gun
by sunlink
Inspired by the original G1 Deadend's weapon. This version has a handle that will fit today's modern Classics / Universe Transformers that have a 5mm peg hole.
- This model was updated with a slightly better redesigned top fin on March 27, 2012.
 
(2)  
  •  
From: $5.46
 
Sunlink - 3mm Clip
by sunlink
If you lose the 3mm ball and clip or just want an extra one, here you go.

Only print in "Strong and Flexible" type

 
(0)  
  •  
From: $1.85
 
Sunlink - Seeker Standard Rifles
by sunlink
Inspired by the toy version of the arm guns that Starscream, Thundercracker and Skywarp used.  Fits a standard 5mm peg hole.
 
(0)  
  •  
From: $9.40
 
Sunlink - Seeker Bombs
by sunlink
Inspired by the toy version of the arm guns that Ramjet uses.  Fits a standard 5mm peg hole.
 
(2)  
  •  
From: $11.29
 
Sunlink - 3mm: Missile Pod
by sunlink
3mm clip system Missile Pod design. 

Only Print in any "Strong and Flexible" materials
 
(0)  
  •  
From: $3.28
 
Sunlink - 3mm:4 Gun Pod
by sunlink
3mm clip system 4 Gun Pod design. 

Only Print in any "Strong and Flexible" materials
 
(0)  
  •  
From: $4.70
 
Sunlink - 3mm Weapons Pack #1
by sunlink
3mm clip system Weapons Pack #1

Includes:
x1 Chaingun + clip
x1 Missile Pod + clip
x1 Pred Laser + clip
x1 4 Gun Pod + clip
x1 Sword + clip

Only Print in any "Strong and Flexible" materials
 
(0)  
  •  
From: $12.83
 
Sunlink - 3mm: Pred Laser
by sunlink
3mm clip system Pred Laser design. 

Only Print in any "Strong and Flexible" materials
 
(0)  
  •  
From: $3.17
 
Sunlink - 3mm: Frenzy / Rumble Lasers
by sunlink
3mm clip system Frenzy / Rumble lasers.

Only Print in any "Strong and Flexible" materials
 
(1)  
  •  
From: $7.55
 
Sunlink - BC11 Plunger v2
by sunlink
Botcon 2011 Toxitron is missing something.  Something you saw in the BC11 comic.  He's missing his plunger!  Now you too can equip Toxitron with his iconic plunger just like in the BC11 comic.  The inner portion of the plunger is a tiered design.  Handle has been designed to fit those robots with a 5mm hand hole.

The BC11 Plunger v2 (this one) is 5mm longer than the BC Plunger v1.
 
(0)  
  •  
From: $7.90
 
Sunlink - 3mm: Chaingun
by sunlink
3mm clip system Chaingun design. 

Only Print in any "Strong and Flexible" materials
 
(2)  
  •  
From: $4.71
 
Sunlink - Ani Minerva Ears
by sunlink
Use these custom antenna's for Animated Arcee.  Unscrew the screw in the back of her head.  Remove the front of the head and slip these antennas between the two head halves and screw the screw back in. 

Note: This will cause the eyes to be offset but it's hard to notice.

Recommended Material Type: White Strong & Flexible (and other S&F variants)

 
(1)  
  •  
From: $2.97
 
Sunlink - OP Top v. 1A
by sunlink
New cab top for Classics Optimus Prime or Classics Ultra Magnus. 
 
(0)  
  •  
From: $6.71
 
Sunlink - Op Top v. 1B
by sunlink
New cab top for Classics Optimus Prime or Classics Ultra Magnus. 
 
(0)  
  •  
From: $6.86
 
Sunlink - Op Top v. 1C
by sunlink
New cab top for Classics Optimus Prime or Classics Ultra Magnus.  Has two 5mm ports on the back to hold a 5mm pegged weapon in both modes.
 
(0)  
  •  
From: $6.99
 
Sunlink - Op Top v. 1D
by sunlink
New cab top for Classics Optimus Prime or Classics Ultra Magnus.  There is a 3mm pole on the back end so a (or multiple) 3mm clip weapon systems can be mounted in either robot or vehicle mode.
 
(0)  
  •  
From: $6.81
 
Sunlink - Ani Minerva G1 Style Ears v1
by sunlink
Use these custom G1 style antenna's for Animated Arcee.  Unscrew the screw in the back of her head.  Remove the front of the head and slip these antennas between the two head halves and screw the screw back in. 

Note: This will cause the eyes to be offset but it's hard to notice. 

Recommended Material Type: White Strong & Flexible (and other S&F variants)

 
(1)  
  •  
From: $2.96
 
Sunlink - Seeker Cluster Cannons
by sunlink
Inspired by the toy version of the arm guns that Dirge uses.  Fits a standard 5mm peg hole.
 
(1)  
  •  
From: $8.96
 
Sunlink - Op Top v. 2D
by sunlink
New cab top for Classics Optimus Prime or Classics Ultra Magnus.  There is a 3mm pole on the back end so a (or multiple) 3mm clip weapon systems can be mounted in either robot or vehicle mode.

Version 2 - Slight longer than the v. 1 models and has a redesigned front.
 
(0)  
  •  
From: $7.17
 
Sunlink - BC11 Plunger v1
by sunlink
Botcon 2011 Toxitron is missing something.  Something you saw in the BC11 comic.  He's missing his plunger!  Now you too can equip Toxitron with his iconic plunger just like in the BC11 comic.  The inner portion of the plunger is concaved.  Handle has been designed to fit those robots with a 5mm hand hole.

The BC11 Plunger v1 (this one) is 5mm shorter than the BC Plunger v2.

 
(1)  
  •  
From: $7.61
 
Sunlink - BC11 Megaphone
by sunlink
Botcon 2011 Wildrider is missing something.  Something you saw in the BC11 comic.  He's missing his Megaphone!  Now you too can equip Wildrider with his iconic megaphone just like in the BC11 comic.  The handle has been designed to fit those robots with a 5mm hand hole along with Wildriders unique hand.


 
(1)  
  •  
From: $6.69
 
Sunlink - BC11 Galvy Cannon
by sunlink
Botcon 2011 Shattered Glass Galvatron is missing something.  He's missing his arm cannon!  Now you can make SG Galvy look more G1-ish with this arm cannon.


 
(1)  
  •  
From: $10.79
 
Sunlink - BC11 Accessory Pack
by sunlink
Sunlink BC11 Accessory Pack includes the following items:

BC11 Galvy Cannon
BC11 Megaphone
BC11 Plunger v1
 
(2)  
  •  
From: $17.76
 
Sunlink - Ani Minerva Antennas + G1 Style Ears v1
by sunlink
Use these custom antenna's for Animated Arcee.  This is for both the antenna and G1 style ears. 

Unscrew the screw in the back of her head.  Remove the front of the head and slip these antennas between the two head halves and screw the screw back in. 

Note: This will cause the eyes to be offset but it's hard to notice.

Note #2: The G1 Style Ears is of the Original design - which does not fill in the side head gaps.

Recommended Material Type: White Strong & Flexible (and other S&F variants)

 
(1)  
  •  
From: $5.68
 
Shop Details
Sunlink's Armory is your first and last stop to arm your Transformers with exciting and unique weapon systems. Whether Autobot or Decepticon they all need something to fight with to win this age long battle.