Hex Flower Coaster

A simple coaster constructed from six interwoven rings.

See also; Hex Maille Coaster

Inspired by the well known mobius strip (discovered by August Ferdinand Möbius in 1858), an interest in the unusual, and 3D modelling, I created the Twin Rail mobius pendant.

A half shell and 3 rails form a bearing-like structure to encapsulate a train of 6mm balls in a mind-warping cage with a twisting, fascinating movement bringing to life the only pendent of its kind in the world.

Includes a 4mm loop for attaching to a necklace or leather cord.

See the photographs with retro-fitted 31 6mm chrome steel ball bearings... in the bottom photo, the balls have been heated until they 'blue'... check out the video to see how they move by clicking on the little icon below the camera above.

Also available smaller and in silver, Twin Rail Mobius Pendant - small


Note: this item is the shell alone, you will need to aquire and fit the balls (31 x 6mm or 29 x 1/4 in) as well as a suitable necklace to hang it from, a 3mm leather cord works well.

Stiched Mobius - a mobius strip pendant featuring a never ending 'running' stitch.

Chek Rope RIng. Made for a friend as a gift, this ring has an inside diameter of 17.5mm ID (US size 7 1/4, UK size O 1/2). Outside diameter is approximately 21mm, the band is 7mm wide.

This ring can be available in any reasonable ring size. Please contact me with sizing info. Price will vary upon size, but will be no more than $25 for an un-polished as-shipped-from-Shapeways ring in stainless steel (see middle photo above.)

Flugel Horn

This is a non-working model approx 1/12 scale

Baritone Horn - based on the Besson BE757

This is a non working model - approx 1/12 scale.

Dragonscale Chain Maille (mail) sampler.

Large rings are 18mm OD 2mm 'wire', the small rings are 12mm OD 1mm 'wire'. With the large aspect ratios of the rings, this is quite a loose weave with plenty of flexibility. This sample patch comprises of 86 rings in all with no joins!.

A crystal containing a hollowed shape of a Kraken (squid).

The piece will need cleaning and polishing using fine (800-1200 grit) automotive type wet and dry sandpaper followed by buffing with a plastic or car body (paint) polish.

Square Maille flat N coaster.

A single coaster in my flat N square maille design. The coaster comprises of 264 individual but interlaced elements. Size, 100 x 100 x 2.5mm.

Set of 4 coasters available here; www.shapeways.com/model/209469/
Please send me a message if you require a set number of coasters.

Square Maille flat N set of four coasters.

A set of four coasters in my flat N square maille design. Each coaster comprises of 264 individual but interlaced elements. Each coaster is 100 x 100 x 2.5mm.

Single coaster available here; www.shapeways.com/model/209547/
Please send me a message if you require a set number of coasters.

Large chainmaille (chainmail) dice bag for those larger dice.

The rings that make up the chain maille are 17mm OD and made of 1.25mm 'wire'. Included in this design is a linked chain as a drawstring.

Available in the strong and flexible materials only.

Step Twin - Stepped edge Die - a D6 die (dice) with stepped edges to compliment my 'Stepped corner D6' see; http://www.shapeways.com/model/156671/stepped_die_d6.html?gid=ug43177 .
This die has 18mm sides with 7mm tall numbers and 1.2mm stepping.

See also; http://www.shapeways.com/model/158405/stepped_die_d12.html?gid=ug43177 a D12 featuring stepping under the center of the numbers.

A pair of 1mm square cross sections makes a sweep around a three pointed 'circle' twisting and intertwining along their way to form this mobius style piece.

A small pendant at 22mm widest or one of a pair for earrings, see;
http://www.shapeways.com/model/170747/tri_mobius_twin_rail_right___micro.html?gid=ug43177

A pair of 1.5mm square cross sections makes a sweep around a three pointed 'circle' twisting and intertwining along their way to form this mobius style piece. Most suited as a pendant.

A larger version, with 2mm square cross section rails can be found here;
http://www.shapeways.com/model/170515/

A pair of earrings in the style of a double, opposite spiral star.

Penny shown for size.

A pair of spiral star earrings.

Penny shown for size.

Bottom photograph shows the earrings polished, buffed with added eyewire and fishook earwire

Square Maille FlatN earrings (pair)

A unique pair of earrings in my FlatN style Squaremaille (chain maille). Each earring is the mirror of the other, so they hang as opposites.

Available in White Strong and Flexible or any of Shapeways seasonal dyed stong & flexible colours.

Can be coloured using acid dyes or dilute artists acrylic paint.

Free earring hooks included.

Five pairs of Mobius Strip earrings, colour them and add your own earwires.

White Strong & Flexible (recommended) is suitable for home colouring with acid dyes or diluted artists acrylic.

Also available in sets of three

Please feel free to buy for the purpose of reselling as a finished product.

Woven 16 D

Woven is a series of pendants all featuring a single body with some kind of self interweave.

Do you have an idea that could be 'woven'?
Send me a message & I'll create your own personal weave!

Woven 16 H

Woven is a series of pendants all featuring a single body with some kind of self interweave.

Do you have an idea that could be 'woven'?
Send me a message & I'll create your own personal weave!

Woven 8

Woven is a series of pendants all featuring a single body with some kind of self interweave.

Do you have an idea that could be 'woven'?
Send me a message & I'll create your own personal weave!

An original idea by my son and realised as a pendant in the form of a games console controller. Some people may recognise the layout of the XBOX 360 controller on which this pendant is based.

Two hoop version here