stop4stuff
Designs by stop4stuff
We found 192 products by stop4stuff
by
stop4stuff
A pendnat featuring a 5 strand right hand mobius style spiral enclosing a 5mm ball.
Best made in stainless steel as the ball jingles & jangles when worn.
Please view my other models for similar items.
Best made in stainless steel as the ball jingles & jangles when worn.
Please view my other models for similar items.
by
stop4stuff
Figure Eight Klein Mobuis
Center of the 8 is at 1inch (25.4mm) diameter.
Maximum dimensions are;
Height: 0.4" (10mm)
Width: 1.3" (33mm)
Depth: 1.4" (36mm)
Center of the 8 is at 1inch (25.4mm) diameter.
Maximum dimensions are;
Height: 0.4" (10mm)
Width: 1.3" (33mm)
Depth: 1.4" (36mm)
by
stop4stuff
Pendant featuring a 2 strand left hand mobius spiral enclosing a 5.6mm ball.
Please view my other models for similar items, including a right hand spiral version as well as a combined left and right hand version.
Please view my other models for similar items, including a right hand spiral version as well as a combined left and right hand version.
by
stop4stuff
European 4 in 1 micro maille sheet.
484 rings
0.35mm 'wire'
AR4.5
ID 1.575mm
Sheet 'as-printed' dimensions are;
Height: 1.23mm
Width: 27.21mm
Length: 29.53mm
by
stop4stuff
A pendant featuring 5 strand left hand and right hand mobius style spirals combined to enclose a 6mm ball.
Best made in stainless steel as the ball jingles & jangles when worn.
Please view my other models for similar items.
Best made in stainless steel as the ball jingles & jangles when worn.
Please view my other models for similar items.
by
stop4stuff
This pendant features a mobius style spiral enclosing a 5mm ball that jingles and jangles when worn. If you'd prefer a left hand spiral, please see; http://www.shapeways.com/model/161325/3_strand_mobius_spiral_with_ball___pendant.html?gid=ug43177
by
stop4stuff
European 4 in 1 micromaille sheet, 484 rings.
The rings are 0.7mm 'wire', AR4.5, ID = 3.15mm
Size (as printed) 54.43 (L) x 2.46 (W) x 59.06 (H) mm - depending upon the lay of the weave all the gaps allowed for printing will be taken up.
When laid flat, the printed sheet is 5.4 x 6.9cm
The rings are 0.7mm 'wire', AR4.5, ID = 3.15mm
Size (as printed) 54.43 (L) x 2.46 (W) x 59.06 (H) mm - depending upon the lay of the weave all the gaps allowed for printing will be taken up.
When laid flat, the printed sheet is 5.4 x 6.9cm
by
stop4stuff
A simple mobius ring formed with a square profile and a 180 degree twist. The square profile has 10mm sides.
This model is designed for full colour printed sandstone, so can have whatever colour text on whatever colour background you wish. The text can be upto 120 characters (60 characters per 'side') and can be in many different fonts.
Want images on there... no problem... just make sure the images would be visable at 10mm tall and within the print resolution for full colour sandstone (600x540 DPI)
This model is designed for full colour printed sandstone, so can have whatever colour text on whatever colour background you wish. The text can be upto 120 characters (60 characters per 'side') and can be in many different fonts.
Want images on there... no problem... just make sure the images would be visable at 10mm tall and within the print resolution for full colour sandstone (600x540 DPI)
by
stop4stuff
European 4 in 1 chain maille sheet - 0.7mm 'wire', AR4.5, 360 rings
Chain - 121 rings, 0.7mm 'wire', AR4.5
Split (open) - 20 rings 0.7mm 'wire', AR4.5 when closed - as-printed, these are slightly oversized to allow for the kerf.
Chain - 121 rings, 0.7mm 'wire', AR4.5
Split (open) - 20 rings 0.7mm 'wire', AR4.5 when closed - as-printed, these are slightly oversized to allow for the kerf.
by
stop4stuff
European 4 in 1 chain maille sheet - 0.35mm 'wire', AR4.5, 360 rings
Chain - 121 rings, 0.35mm 'wire', AR4.5
Split (open) - 20 rings 0.35mm 'wire', AR4.5 when closed - as-printed, these are slightly oversized to allow for the kerf.
Chain - 121 rings, 0.35mm 'wire', AR4.5
Split (open) - 20 rings 0.35mm 'wire', AR4.5 when closed - as-printed, these are slightly oversized to allow for the kerf.
by
stop4stuff
336 scales
X by Y: 5.56mm x 8.95mm
Thickness: Minimum 0.70mm, Maximum 0.72mm
Scales interconected by a string through holes in the scales.
Cut off a flat end to slide the scales off & sew them onto a garment for a fluid scalemaille effect.
Ideal to add to outfits and props for 1/4 scale Aisian Ball Jointed Dolls,
X by Y: 5.56mm x 8.95mm
Thickness: Minimum 0.70mm, Maximum 0.72mm
Scales interconected by a string through holes in the scales.
Cut off a flat end to slide the scales off & sew them onto a garment for a fluid scalemaille effect.
Ideal to add to outfits and props for 1/4 scale Aisian Ball Jointed Dolls,
by
stop4stuff
Japanese or Oriental 6 in 1 chain maille sheet.
Small rings are 0.7mm 'wire', AR4.0, ID 2.8mm, OD 4.2mm
Large rings are 1mm 'wire', AR4.5, ID 4.5mm, OD 6.5mm
100 Large rings, 419 Total rings
Small rings are 0.7mm 'wire', AR4.0, ID 2.8mm, OD 4.2mm
Large rings are 1mm 'wire', AR4.5, ID 4.5mm, OD 6.5mm
100 Large rings, 419 Total rings
by
stop4stuff
European 4 in 1 micro chain maille
609 rings - 10cm x 4cm sheet*
0.7mm wire, AR 4.5, ID 3.15mm
*Actual 'as-printed' dimensions are 101.925 x 39.890 mm
609 rings - 10cm x 4cm sheet*
0.7mm wire, AR 4.5, ID 3.15mm
*Actual 'as-printed' dimensions are 101.925 x 39.890 mm
by
stop4stuff
0.7 and 1mm wire rings
Different combinations of wire circumference (wc) edges and ring circumference (rc) edges.
Rings are all AR4.0 and spaced with 0.25mm gap.
In the model render, the 0.7mm rings are are on the left, the 1mm rings on the right.
From the bottom to the top, the wc edges are 8, 12, 16, 20 & 24 (label a, b, c, d & e)
From the outside to the middle support the rc edges are 8, 16, 32, 64 & 128 (label v, w, x, y & z)
This gives a big sample of different mesh smoothness' to acertain good grade rings for different types of scale modelling.
FUD version with 0.35 & 0.5mm wire here
Different combinations of wire circumference (wc) edges and ring circumference (rc) edges.
Rings are all AR4.0 and spaced with 0.25mm gap.
In the model render, the 0.7mm rings are are on the left, the 1mm rings on the right.
From the bottom to the top, the wc edges are 8, 12, 16, 20 & 24 (label a, b, c, d & e)
From the outside to the middle support the rc edges are 8, 16, 32, 64 & 128 (label v, w, x, y & z)
This gives a big sample of different mesh smoothness' to acertain good grade rings for different types of scale modelling.
FUD version with 0.35 & 0.5mm wire here
by
stop4stuff
0.35 and 0.5mm wire rings
Different combinations of wire circumference (wc) edges and ring circumference (rc) edges.
Rings are all AR4.0 and spaced with 0.125mm gap.
In the model render, the 0.35mm rings are are on the left, the 0.5mm rings on the right.
From the bottom to the top, the wc edges are 8, 12, 16, 20 & 24 (label a, b, c, d & e)
From the outside to the middle support the rc edges are 8, 16, 32, 64 & 128 (label v, w, x, y & z)
This gives a big sample of different mesh smoothness' to acertain good grade rings for different types of scale modelling.
WSF version, 0.7 & 1mm wire here
Different combinations of wire circumference (wc) edges and ring circumference (rc) edges.
Rings are all AR4.0 and spaced with 0.125mm gap.
In the model render, the 0.35mm rings are are on the left, the 0.5mm rings on the right.
From the bottom to the top, the wc edges are 8, 12, 16, 20 & 24 (label a, b, c, d & e)
From the outside to the middle support the rc edges are 8, 16, 32, 64 & 128 (label v, w, x, y & z)
This gives a big sample of different mesh smoothness' to acertain good grade rings for different types of scale modelling.
WSF version, 0.7 & 1mm wire here
by
stop4stuff
Victorian Science Fiction wargaming 1:1200 scale Tesla Defense Tower - 7 parts sprued together.
by
stop4stuff
My version of Charles Perry's Indiana Arc at the Indiana University Museum of Art, Bloomington, IN, USA
Note: this model is for show only and will not be for sale.
Note: this model is for show only and will not be for sale.
by
stop4stuff
WIP - Tesla Defense Tower
A land based defensive unit for Victorian Science Fiction (VSF) 1:1200 scale wargaming.
Boilers, pistons and generator added.
Click here for interactive 3D view
Please click here for the finalised model
A land based defensive unit for Victorian Science Fiction (VSF) 1:1200 scale wargaming.
Boilers, pistons and generator added.
Click here for interactive 3D view
Please click here for the finalised model
by
stop4stuff
A set of 6 mobius rings and stars for use as Christmas decorations.
The rings and stars have a 1mm hole for threading a wire or a string to allow for hanging.
The main photo shows the decoration made up using a head-pin and some white beads.
The rings and stars have a 1mm hole for threading a wire or a string to allow for hanging.
The main photo shows the decoration made up using a head-pin and some white beads.
by
stop4stuff
Another work in progress for Victorian Science fiction wargaming - Torpedo Defense Island
by
stop4stuff
Ring & Link garlic bulb hanger
Rings and links together form a bag to hang garlic bulbs.
Note: This product is not rated as 'food safe'.
Rings and links together form a bag to hang garlic bulbs.
Note: This product is not rated as 'food safe'.
by
stop4stuff
Victorian cast iron style bench set with an ivy pattern in 1:76 scale.
The model consists of a 5 and 6 section circular bench, a 3 seat bench and a 2 seat bench.
For information about each of the different benches, please see the relevant model pages below.
5 section circular bench
6 section circular bench
2 seat bench
3 seat bench
Ideal for serious OO (1:76) scale dioramas.
Other sizing and options available upon request, send me a message with your needs.
The model consists of a 5 and 6 section circular bench, a 3 seat bench and a 2 seat bench.
For information about each of the different benches, please see the relevant model pages below.
5 section circular bench
6 section circular bench
2 seat bench
3 seat bench
Ideal for serious OO (1:76) scale dioramas.
Other sizing and options available upon request, send me a message with your needs.
by
stop4stuff
European 4 in 1 Micro Maille!
AR5.0, 0.3mm 'wire', 196 rings, 0.10mm spacing.
Designed for and only available in Frosted Ultra Detail.
As yet, untested. Photos will appear as & when :)
AR5.0, 0.3mm 'wire', 196 rings, 0.10mm spacing.
Designed for and only available in Frosted Ultra Detail.
As yet, untested. Photos will appear as & when :)
by
stop4stuff
This pendant has a small version of my 3 strand mobius inside.
The model is intended for printing in Frosted Ultra Detail as an experiment to see what effect can be made with trapped wax support material.
by
stop4stuff
Will this be the smallest functioning 3 x 3 x 3 twisty puzzle in the world?
Each face is 2 x 2mm, the spacing is 0.1mm giving an overall size of 6.2 x 6.2 x 6.2 mm...
And...
it is designed to be printed as one piece :)
I don't think I'll be able offer this item for sale, as the mechanism is the same as the original Rubik's Cube.
Each face is 2 x 2mm, the spacing is 0.1mm giving an overall size of 6.2 x 6.2 x 6.2 mm...
And...
it is designed to be printed as one piece :)
I don't think I'll be able offer this item for sale, as the mechanism is the same as the original Rubik's Cube.
Shop Details
Expertise
- 3D modeler
