An owl in full colour sandstone. Can be worn as a pendant, earring or charm (don't forget to order two if you want a pair of earrings).

A pendant based on that of the one worn by the character Mick St. John in the 2007 TV show "Moonlight" that ran until 2008 with 16 episodes.

Wikipedia entry: Moonlight is an American paranormal romance television drama created by Ron Koslow and Trevor Munson, who was also executive producer for all episodes with Joel Silver, Gerard Bocaccio, Gabrielle Stanton and Harry Werksman. The series follows private investigator Mick St. John (Alex O'Loughlin), who was turned into a vampire by his bride Coraline (Shannyn Sossamon) on the couple's wedding night fifty-five years earlier. In the present day, he struggles with his attraction to a mortal woman, Beth Turner (Sophia Myles), his friendship with Josef Kostan (Jason Dohring), and his dealings with other vampires in Los Angeles.

A diamond ring minus the diamond! Yep, it's all sterling silver.

If you'd like another size get in touch - gslinger (at) rogers (dot) com

This ring is a size US 6.
If you'd like another size please contact me: gslinger at rogers dot com.
I have another ring like this in my shop that has a much more rounded and smooth finish.

A pendant based on a paintbrush. Know anyone whose job it is to paint things? Well, this would make an ideal gift!

This is a Steampunk-inspired pendant I designed using two different materials printed here; Winter Red Strong and Flexible, and Antique-bronze Plated Stainless Steel. Shapeways isn't set up to sell products that combine materials yet, so if you want this particular piece please contact me. The red heart is solid except for the hole you see that will allow for a thin chain to thread through to the other side. I only made this one piece and will sell it for US$50. Shipping $5 within US or Canada, elsewhere $10. 

Contact gslinger at rogers dot com 

A custom requested key-chain. Don't know what a bacteriophage is? Neither did I when the order came in! But it's interesting... look it up.

 

A ring designed to look like flames wrapping round your finger. This one should print to 16mm diameter. I have taken all metals but silver off this model because I'm not impressed with how the stainless steel printed on my last model (little bits stuck to the surface in hard to reach areas). The silver is made in a different manner to s/steel.

If you'd like this in a different size please message me here.

A TARDIS earring for the fans of Doctor Who. Based on my 5cm miniatures also available here: http://www.shapeways.com/model/123277/dr_who_s_tardis__5_cm_.html
http://www.shapeways.com/model/189295/tardis__simple_.html?gid=ug31952

Comes with earring hook! Remember, this is only ONE item. If you want two earrings (assuming you have two ears!) then you will obviously need to order another...
***** PLEASE READ BELOW ****
With all kinds of problems printing in silver and the fact that the lettering seems to have disappeared on upload I am taking this out of sale and will have to do a complete revision.
If you would like to be notified when I have done this please email me at gslinger at rogers dot com.

A pendant with a "hammered metal" texture, based on my Bucephalus Horse miniature statue that can be seen here: http://www.shapeways.com/model/147260/bucephalus_horse.html

Coin holder ring. The top will hold a Canadian quarter coin (23.8mm, same as USA) with just a small clearance. It would, of course, need to be glued in. The ring size prints to14.3mm so would fit a N. American 3 to 3.5

If you would like a different size please get in touch here or at gslingeratrogersdotcom.

Of course, the coin does not come with it!

Take a look at the last photo which shows another variation of what I have done with this ring blank - this time with gold flake, paint and resin. 

Sorry, but I have had to remove this from sale due to printing issues. If you're still interested I do have ONE of these for sale in a gorgeous transparent blue acrylic in my Etsy store for $15 - https://www.etsy.com/listing/80668829/serleenas-necklace-blue-acrylic-14cms

--------------------------------------------------------------------------------------------
A replica of the necklace worn by Serleena in the movie "Men in Black II". This was requested of me a short time ago but in silver, but I've just found out that it is too fragile to make in silver, sorry.

I can't vouch for its likeness since I was shown very indistinct photo's from the movie... but it's a nice necklace anyway, I think. At just over 14cm in width and with a subtle curve to its form it should sit comfortably a few inches below the neck. Your own chain would be required to fasten at each end.

This was a custom request... Now available to you! Just for your inner hippy! The Ohm, Peace and Love symbols lie vertically on a surfboard-shaped pendant, with a hole large enough to string a piece of leather through and hang it round your neck as you cruise the neighbourhood of your favourite beach scene.

Updated: Raised symbols on the front, flat on back.

A ring inspired by the tri-spiral design on the entrance stone at the Megalithic Tomb in Newgrange, Ireland, which is probably the most famous Irish Megalithic symbol. It is often referred to as a Celtic design, but it was carved at least 2500 years before the Celts reached Ireland. The Megalithic Passage Tomb at Newgrange was built about 3200 BC. The kidney shaped mound covers an area of over one acre and is surrounded by 97 kerbstones, some of which are richly decorated with megalithic art. The 19 metre long inner passage leads to a cruciform chamber with a corbelled roof. It is estimated that the construction of the Passage Tomb at Newgrange would have taken a work force of 300 at least 20 years.

Size approx 7.5 - just under 18mm inner diameter. I can make other sizes if you contact me.

I also have a pendant with this design on it, and to see the actual design on the face please go here:
http://shpws.me/lpgk

Information from http://www.knowth.com/newgrange.htm

A pendant of a surfboard with a large shark bite taken out of it. Photo shows the pendant in Alumide material with the included black rubber-like necklace. Although 7cms in length the pendant is very lightweight.

A pendant that is featured in the latest Harry Potter movie. Wear the Deathly Hallows symbol to represent the three highly powerful magical objects - the Elder Wand, the Resurrection Stone, and the Cloak of Invisibility. In the movie the circle revolves, but this one does not. I have also designed a much nicer bail for the chain to include the HP characters in the font used on the movie posters (see the close-up). The bail moves freely inside the circle on top of the pendant. 

5th Aug 2011 - Even though I've already had this made in stainless steel (as you can see here!) I was told that I got lucky and that others in metal would break during production. (edit: In fact Shapeways now doesn't allow moveable parts in metal models). I am now going to make a new model of this so that the bail doesn't move, therefore it is not available in the metals but you can still order it in the acrylics (see additional photo's). Please check back later.

Like this? How about Tweeting it to your friends or letting your Facebook contacts know about it by clicking one of the above.

Looking for that perfect gift for that computer nerd in your life? Now, to accompany my nerdy "They Walk Among Us" bracelet (http://www.shapeways.com/model/152181/they_walk_among_us_____bracelet.html?gid=ug31952) I have designed this pendant. The featured computer binary code spells out the word LOVE...
The inside diameter of the bail is almost 5mm crosswise, but due to the top of the pendant sticking into it the up/down measurement is almost 4mm... so a 3mm necklace will fit inside it.
How about having some printed in the coloured SF material and giving them away as nerdy wedding party favors?

Police Badge Pendant. Know of any police officer you'd like to present with a gift? Get in touch with me and I'll make one for you. I will upload the design here so that you can order direct from Shapeways in a private order. I'll need the initials of his/her police department and, of course, the badge number. $30 in stainless steel, including shipping... Also available in silver starting at $65

The photo above shows some post production work; I took a Dremel tool to the raised surfaces and polished them. You don't have to do this, but for $10 extra and with payment direct to me I will design, make, polish and mail to you...

You can message me here or send email direct to gslinger(at)rogers(dot)com.




 

30NOV2011 Edit: Sorry, but despite the fact that this has been printed before, now Shapeways is telling me it can't be printed so I have had to remove from offer. ------------- The "Secret Love Pendant" looks like a contemporary heart design from the front, but when viewed from the side clearly shows that the heart is made out of love!

** Please note that the included rubber necklace that comes with this pendant will NOT fit through the bail due to the long metal bayonet fittings on each end. Your own small chain will fit through **

I have a rendered rotating view of this pendant on my Blog at http://thirddimensionjewellery.wordpress.com/

Egyptian Ankh Pendant with the Eye of Horus symbol on the bottom and a sun symbol in the middle.

A bracelet inspired by the organic shapes found in nature.  6cm inside diameter. If you would like a different size please contact me here or by email at gslinger (at) rogers (dot) com.

I have had this successfully printed in the Frosted Detail material and can say that this pretty much fits any wrist since it is very flexible. For that same reason I've had to take all the metal materials out.

Ring with small flower petal design. The inside diameter is 17mm (approx size 6.5).     

There is is good ring-sizer document here:  http://ahuva.com/Static/Ring-Sizer.pdf

Keep in mind that there will be very small variances in size, depending on what material it is made in. I believe Silver will alter less.

If you would like this in another size, or have any ideas for modifications, please contact me here or by email gslinger (at) rogers (dot) com.

Got a broken heart that's been stitched together? Who hasn't at some point... This pendant represents exactly that - a heart that has been sewn back together. This is a 3cm double-sided version that works out kind of expensive in stainless steel or silver, but not unreasonably so. I have made a single-sided version that is about half the cost here: http://www.shapeways.com/model/262584/stitched_heart___single_sided.html?gid=ug

Any questions please either send me a message here or email me gslinger at rogers dot com.

 

Got a broken heart that's been stitched together? Who hasn't at some point... This pendant represents exactly that - a heart that has been sewn back together. This is a 3cm single-sided version that is a variation of the double-sided version here: http://www.shapeways.com/model/261485/stitched_heart.html?gid=ug31952

Any questions please either send me a message here or email me gslinger at rogers dot com.