Has NOT been test printed.

Has NOT been test printed.

The mechanism for this model is a "Pro-hobby Caramel Ca-ND 1".
Link to the mechanism:
http://www.osbornsmodels.com/pro-hobby-ca-nd-1-carmel-micro-n-scale-chassis-8727-p.asp

The decal sheet for this model can be downloaded from the link below:
http://www.shapeways.com/forum/index.php?t=msg&goto=51263msg_51263

Handrails can be added using the locating dimples which are provided in the model.
Slots are provided for mounting N-scale micro-couplers.

This model is also available in 1:76.2 scale.

This is a generic model of the Puffing Billy Railway NA.

It fits over a Graham Farish Class 08 N scale mechanism.

The kit contains the following parts :
1 The NA Body
2 A pair of bogies and wheelsets(1.5mm dia screws are needed to fix the bogies to the body.)
3 A chimney which can be fixed on the spigot provided.
4 Three pairs of number plates (1A,14A,17A) with tabs that fit into slots in the side tanks.
5 Two caps that fit into slots under the water tanks.
6 Two pairs of connecting rods.(The working of these rods has not been tested)

A second chimney and number plates ie.2A to 17A are available separately in my shop.
Slots are provide for attaching N scale micro-couplers.
The side tanks are hollow which can filled with araldite and buckshot to increase weight.

The fine detail of the number plates print well only in the Frosted Ultra-Detail version.Decals can be used if you order this model in the Frosted detail material.

The decal sheet for this model can be downloaded below:
http://www.shapeways.com/forum/index.php?t=msg&goto=52567msg_52567

SEM 9mm 88 Wheelsets and HO scale couplers are needed to complete the model.
SEM J Class Tender Bogies can be also be used in place of the 3d printed bogies.

The decal sheet for this model can be downloaded below:
http://www.shapeways.com/forum/index.php?t=msg&goto=53485msg_53485

A stripped down version with brake lines,brake wheels and buffers removed is available separately in my shop.

The dimensions of this loco are "7.9 l x 2.9 w x 4.1 h" in cm.

This locomotive fits over a Graham Farish Class 08 N scale mechanism.
Dimples are added to locate the positions of the handrail stanchions and front and rear horn clusters.
Slots are provided for fitting microtrain couplers.

The decal sheet for this model can be downloaded in the following link:
http://www.shapeways.com/forum/index.php?t=msg&goto=50296msg_50296

Has NOT been test printed.

The mechanism for this model is the "Kato Mech TM-04 / KD-25".

Side frames have to be removed from the body shell and attached to the donor mechanism.

This is the Front Unit of the HOn30 PBR G42 kit.

---

Want to get a set?

+ + +

---

This the Rear unit of the HOn30 G42 Kit.

---

Want to get a set?

+ + +

---

This model needs to be handled carefully as parts are fragile.

These are additional number plates which can be fitted onto the side tanks of the HOn30 scale NA available in my shop.

This kit contains the numbers 2A to 17A.

Contains 4 standard underframes!

This model is also available in 1:87(HO) scale.

Not available in White,Strong & Flexible Polished due to size restrictions.

The furphy water cart on timbers with 10 different replaceable ends.

The decal sheet for this model can be downloaded from the link below:
http://www.shapeways.com/forum/index.php?t=msg&goto=50813msg_50813

This model is also available in 1:87(HO) scale.

The furphy water cart on timbers with 10 different replaceable ends.

The text on the ends may not print in this HO scale version.
Decals may be used instead.
The decal sheet for this model can be downloaded from the link below:
http://www.shapeways.com/forum/index.php?t=msg&goto=50813msg_50813

This model is also available in 1:48(O) scale.

The modern version of the famous furphy water cart.

The lettering on the end may not print.
Also a bit of filing may be necessary to get the end fit onto the body.

The decal sheet for this model can be downloaded below:
http://www.shapeways.com/forum/index.php?t=msg&goto=50894msg_50894

This model is also available in 1:48(O) scale.

The horse drawn version of the furphy water cart with 10 different replaceable ends.

The text on the ends may not print in this HO scale version.
Decals may be used instead.
The decal sheet for this model can be downloaded from the link below:
http://www.shapeways.com/forum/index.php?t=msg&goto=50813msg_50813

This model is also available in 1:48(O) scale.

Also available in HO scale.

Also available in O scale.

The mechanism for this locomotive is a "DUO91054D-12 Drive Unit".

Please check the link below : http://www.madge00n3.co.uk/pdf/DU091054D-12.pdf

Slots for attaching micro-train couplers and dimples for hand rail stanchions are provided.

The decal sheet for this model can be downloaded in the following link:
http://www.shapeways.com/forum/index.php?t=msg&goto=50297msg_50297

This model is also available in 1:76.2 scale.

The mechanism for this model is a "Pro-hobby Caramel Ca-ND 1".
Link to the mechanism:
http://www.osbornsmodels.com/pro-hobby-ca-nd-1-carmel-micro-n-scale-chassis-8727-p.asp

Handrails can be added using the locating dimples which are provided in the model

The decal sheet for this model can be downloaded from the link below:
http://www.shapeways.com/forum/index.php?t=msg&goto=50814msg_50814

This model is also available in 1:43 and 1:76.2 Scale.

This model is also available in 1:87(HO) and 1:43 scale.

This model is also available in 1:87(HO) scale.

This model is also available in 1:87(HO) scale.

Has NOT been test printed.

This is stripped down version of the PBR Q129 available in my shop with buffers,brake line and brake wheels removed.
Brass buffers,etched brass wheels and brass brake wire can be used instead.
Also SEM 9mm 88 Wheelsets and HO scale couplers are needed to complete the model.
SEM J Class Tender Bogies can be also be used in place of the 3d printed bogies.

The decal sheet and the brake wiring diagram for this model can be downloaded below:
http://www.shapeways.com/forum/index.php?t=msg&goto=53485msg_53485