We found 58 products by pzich
by
pzich
A series of overlapping rings rotated 15º on the x axis, then rotated at 30º intervals on the y axis.
by
pzich
A series of overlapping rings rotated 15º on the x axis, then rotated at 30º intervals on the y axis.
by
pzich
Testing spacing for hinges (if the pin is centered in the hole, there is .5mm of space on all sides of it). These will be printed apart, a similar ...
by
pzich
Frame and wheel/axels for a car. Hoping the space is great enough that the frame won't be fused to the axels (we'll see).
by
pzich
Testing spacing for hinges (if the pin is centered in the hole, there is .5mm of space on all sides of it). These will be printed together in place...
by
pzich
Testing the flexibility of the materials. 1mm beams with 1cm space in between.
by
pzich
1mm slices of a sphere, connected by a cylinder in the center, it's amazingly flexible.
by
pzich
This is a smaller (cheaper) model to test the flexibility of White Strong & Flexible at 0.1, 0.2, and 0.3 cm.
by
pzich
Model of a carbon buckyball (Fullerene). Technically a wireframe truncated icosahedron.
by
pzich
Testing spacing for hinges (if the pin is centered in the hole, there is .5mm of space on all sides of it). These will be printed apart, a similar ...
by
pzich
One of four parts for an engine.http://www.shapeways.com/model/167706/http://www.shapeways.com/model/167727/This model is still untested. I followe...
by
pzich
One of four parts for an engine (you need two of these).http://www.shapeways.com/model/167344/http://www.shapeways.com/model/167727/This model is s...
by
pzich
One of four parts for an engine.http://www.shapeways.com/model/167344/http://www.shapeways.com/model/167706/This model is still untested. I followe...
by
pzich
Curious to see if this will work, if it does it will have many applications from pivotable objects to simple multi-part objects.
Shop Details
Expertise
- 3D modeler
- Animator
- Designer
- Product designer
- Artist
- Maker
