mctrivia is selling 71 products in Material[Metal] section
by
mctrivia
by
mctrivia
6 crosses made to standard dimensions, oriented and weighted to roll fair.
This die has been tested and found fair.
This die has been tested and found fair.
by
mctrivia
6 crosses made to standard dimensions, oriented and weighted to roll fair.
this die has been tested and found fair.
this die has been tested and found fair.
by
mctrivia
An interesting die design. carefully crafted to have a center of gravity exactly in the center of the die it will fall fairly. But the dots do not sit on sides but instead lay on spindles 90 deg out from the previous layers.
This die has been tested and found fair.
This die has been tested and found fair.
by
mctrivia
A simple 3/4" die with no center. Die is fairly weighted
This die has been tested and found fair
This die has been tested and found fair
by
mctrivia
What is it? Well it is a die without the die. I took a standard die removed everything but the pips then placed supports in the corners so it would roll far. And there you have it a really cool fair die. Play games with it collect it. What ever you do with it people will deinetly ask you about it.
Sizes of the dots on the 1,2,3 sides have been enlarged so these sides have the same mass as the 6,5,4 sides respectively.
This die has been tested and found fair.
Sizes of the dots on the 1,2,3 sides have been enlarged so these sides have the same mass as the 6,5,4 sides respectively.
This die has been tested and found fair.
by
mctrivia
A light D6 with sides floating on the corners. Care has bean taken to weight so the die will be fair.
This die has been tested and found fair.
This die has been tested and found fair.
by
mctrivia
A light D6 with sides floating on the corners. In each of the 8 corners a small spike has been included to make sure it can only land on 1 of the 6 sides. Care has bean taken to weight so the die will be fair.
This die has been tested and found fair.
This die has been tested and found fair.
by
mctrivia
A light D6 with sides floating on the corners. The sides have been clawed giving a pretty cool look. Care has bean taken to weight so the die will be fair.
This die has been tested and found fair
Photo provided courtesy of dicecollector.com
This die has been tested and found fair
Photo provided courtesy of dicecollector.com
by
mctrivia
A die in the shape of the symbol PI. To make it even better this die is perfectly weighted and all sides are roughly the same landing area. If rolled on a flat surface this die will roll fair so you can actually use it.
This die has been tested and found to be fair.
This die has been tested and found to be fair.
by
mctrivia
Designed to look like a traditional die but instead of the sides being numbered 123456 they are numbered 314159 after the first 6 digits of pi.
You can use this die as a traditional die if you know the way a standard die is numbered.
3 -> 1
1(opposite 5) -> 2
4 -> 3
1(opposite 4) -> 4
5 -> 5
9 -> 6
Or you could use it as numbered. The average on a standard die is 3.5 this die is 3.83
You can use this die as a traditional die if you know the way a standard die is numbered.
3 -> 1
1(opposite 5) -> 2
4 -> 3
1(opposite 4) -> 4
5 -> 5
9 -> 6
Or you could use it as numbered. The average on a standard die is 3.5 this die is 3.83
by
mctrivia
Can you figure out what side is what? It can be done but can be difficult. Hint 1,2,3 are always counter clockwise. This was my hardest die yet to balance.
by
mctrivia
Same as Binary D6 but with the most significant digit marked to make easy to read.
Photo provided courtesy of dicecollector.com
Photo provided courtesy of dicecollector.com
by
mctrivia
A D16 with each side labeled in binary. Thickness of each side has been carefully selected to properly balance the die so it will roll fair. MSB of each side is the wide part of the triangle.
Photo provided courtesy of dicecollector.com
Photo provided courtesy of dicecollector.com
by
mctrivia
Just the numbers and nothing but. Does not look like a die at first glance but if you roll it on a table and look straight down the value of your roll will become obvious. Confuse people as you play games with what looks like a piece of art. Easy to read when you know the trick of looking from above. Pretty much impossible to read from any other angle.
by
mctrivia
Just the numbers and nothing but. This die should be close to fair but has not yet been tested and is probably not perfectly fair.
by
mctrivia
Original designed to be printable on a home made 3D printer this die was originally 90mm tall. It has been scaled down to be a more reasonable size and affordable on shapeways.
by
mctrivia
Does not look like it from render but this is a D6. You read the numbers on the points of the 8 sided diamond in the center of the cube. The number you roll is obvious from dead on but not so much on an angle.
by
mctrivia
Does not look like it from render but this is a D6. You read the numbers on the points of the 8 sided diamond in the center of the cube. The number you roll is obvious from dead on but not so much on an angle.
Photo provided courtesy of dicecollector.com
Photo provided courtesy of dicecollector.com
by
mctrivia
Does not look like it from render but this is a D6. You read the numbers on the points of the 8 sided diamond in the center of the cube. The number you roll is obvious from dead on but not so much on an angle.
Photo provided courtesy of dicecollector.com
Photo provided courtesy of dicecollector.com
by
mctrivia
by
mctrivia
This was designed for a new card game.
Crazy Randoms
Plays similar to crazy 8s except there is no wild at begining of game. When a player can not play they pick up a card like normal. If they still can't play they roll the die and that card is wild until the die is rolled again.
Crazy Randoms
Plays similar to crazy 8s except there is no wild at begining of game. When a player can not play they pick up a card like normal. If they still can't play they roll the die and that card is wild until the die is rolled again.
by
mctrivia
this large 85mm diameter spherical D15 is for the true Math geek. Numbered with all 15 primes of Monstrous M theory it is sure to get people talking. Even though the landing surfaces are all flat there is a large spherical weight which will help the die always land on a valid side.
by
mctrivia
simplified and slightly smaller version of the original.
by
mctrivia
count the number of sides for each shape. die has been perfectly waited.
Photo provided courtesy of dicecollector.com
Photo provided courtesy of dicecollector.com
Shop Details
Expertise
- 3D modeler
- Designer
- Product designer
Shop Sections
- All Sections
- Build Type[Frame]
- Build Type[Hollow]
- Build Type[Points]
- Build Type[Solid]
- Build Type[Truncated Sphere]
- Customizable
- Dice Set[Crystal]
- Dice Set[Dual]
- Dice Set[Frameless]
- Dice Set[Grid]
- Dice Set[Points]
- Dice Set[Prime]
- Material[Glass]
- Material[Metal]
- Non Dice
- Sides[002]
- Sides[003]
- Sides[004]
- Sides[005]
- Sides[006]
- Sides[007]
- Sides[008]
- Sides[009]
- Sides[010]
- Sides[011]
- Sides[012]
- Sides[013]
- Sides[015]
- Sides[016]
- Sides[017]
- Sides[018]
- Sides[019]
- Sides[020]
- Sides[022]
- Sides[024]
- Sides[025]
- Sides[028]
- Sides[030]
- Sides[034]
- Sides[036]
- Sides[040]
- Sides[048]
- Sides[060]
- Sides[100]
- Sides[144]
- Sides[256]
- Specialty[4D]
- Specialty[Data]
- Specialty[Loaded]
- Specialty[Lottery]
- Specialty[Math]
- Specialty[Obfuscation]
- Specialty[Shell]
- Specialty[Time]
- Vinshi's Designs
