mctrivia is selling 139 products in Build Type[Frame] section
by
mctrivia
suspended in the center of a cube made up of 12 springs is a ball supported by 8 more springs. Waited fairly and if made of a flexible material should be very interesting die.
This die has been tested and found fair.
This die has been tested and found fair.
by
mctrivia
6 crosses made to standard dimensions, oriented and weighted to roll fair.
This die has been tested and found fair.
This die has been tested and found fair.
by
mctrivia
An interesting die design. carefully crafted to have a center of gravity exactly in the center of the die it will fall fairly. But the dots do not sit on sides but instead lay on spindles 90 deg out from the previous layers.
This die has been tested and found fair.
This die has been tested and found fair.
by
mctrivia
It has come to my attention that though both sides of each face can be landed on they are still the same face when looking at in the 4th dimension. so i have made http://www.shapeways.com/model/167487/4d_d24.html to correct this.
This is a shadow of a 4 dimensional D48 Die. The shape is called a hyper cube. It is made up of 8 equally sized cubes with each face of each cube connected to a face of another cube. Since it is a shadow and not actually printed on a 4 dimensional printer there is some warping of geometry and a bit of thought is needed to see the 4 dimensional shape. Obviously it is impossible to roll the die and have it land on any sides other then 5,13,21,28,36, and 44 but even without trying it ended up being a fairly waited model.
To make it possible to print you will notice that each face has 2 numbers. the number that you can read correctly is the number for the side you are looking at. The number you can not read correctly is for the cube on the inside.
Hope you enjoy this unique die.
This is a shadow of a 4 dimensional D48 Die. The shape is called a hyper cube. It is made up of 8 equally sized cubes with each face of each cube connected to a face of another cube. Since it is a shadow and not actually printed on a 4 dimensional printer there is some warping of geometry and a bit of thought is needed to see the 4 dimensional shape. Obviously it is impossible to roll the die and have it land on any sides other then 5,13,21,28,36, and 44 but even without trying it ended up being a fairly waited model.
To make it possible to print you will notice that each face has 2 numbers. the number that you can read correctly is the number for the side you are looking at. The number you can not read correctly is for the cube on the inside.
Hope you enjoy this unique die.
by
mctrivia
This is a shadow of a 4 dimensional D24 Die. The shape is called a hyper cube. It is made up of 8 equally sized cubes with each face of each cube connected to a face of another cube. Since it is a shadow and not actually printed on a 4 dimensional printer there is some warping of geometry and a bit of thought is needed to see the 4 dimensional shape. The sides have been numbered keeping to the rule that opposite sides must add to 25 and arranged and weighted so it can still be used as a fair 3D D6.
Hope you enjoy this unique die.
Hope you enjoy this unique die.
by
mctrivia
Can you figure out what side is what? It can be done but can be difficult. Hint 1,2,3 are always counter clockwise. This was my hardest die yet to balance.
by
mctrivia
Same as Binary D6 but with the most significant digit marked to make easy to read.
Photo provided courtesy of dicecollector.com
Photo provided courtesy of dicecollector.com
by
mctrivia
A D16 with each side labeled in binary. Thickness of each side has been carefully selected to properly balance the die so it will roll fair. MSB of each side is the wide part of the triangle.
Photo provided courtesy of dicecollector.com
Photo provided courtesy of dicecollector.com
by
mctrivia
Original designed to be printable on a home made 3D printer this die was originally 90mm tall. It has been scaled down to be a more reasonable size and affordable on shapeways.
by
mctrivia
Does not look like it from render but this is a D6. You read the numbers on the points of the 8 sided diamond in the center of the cube. The number you roll is obvious from dead on but not so much on an angle.
by
mctrivia
Does not look like it from render but this is a D6. You read the numbers on the points of the 8 sided diamond in the center of the cube. The number you roll is obvious from dead on but not so much on an angle.
Photo provided courtesy of dicecollector.com
Photo provided courtesy of dicecollector.com
by
mctrivia
by
mctrivia
This was designed for a new card game.
Crazy Randoms
Plays similar to crazy 8s except there is no wild at begining of game. When a player can not play they pick up a card like normal. If they still can't play they roll the die and that card is wild until the die is rolled again.
Crazy Randoms
Plays similar to crazy 8s except there is no wild at begining of game. When a player can not play they pick up a card like normal. If they still can't play they roll the die and that card is wild until the die is rolled again.
by
mctrivia
this large 85mm diameter spherical D15 is for the true Math geek. Numbered with all 15 primes of Monstrous M theory it is sure to get people talking. Even though the landing surfaces are all flat there is a large spherical weight which will help the die always land on a valid side.
by
mctrivia
simplified and slightly smaller version of the original.
by
mctrivia
One of 191 dice in my D6 Grid Die set. The entire set available at http://dicetest.com
by
mctrivia
One of 191 dice in my D6 Grid Die set. The entire set available at http://dicetest.com
by
mctrivia
One of 191 dice in my D6 Grid Die set. The entire set available at http://dicetest.com
by
mctrivia
One of 191 dice in my D6 Grid Die set. The entire set available at http://dicetest.com
by
mctrivia
One of 191 dice in my D6 Grid Die set. The entire set available at http://dicetest.com
by
mctrivia
One of 191 dice in my D6 Grid Die set. The entire set available at http://dicetest.com
by
mctrivia
One of 191 dice in my D6 Grid Die set. The entire set available at http://dicetest.com
by
mctrivia
One of 191 dice in my D6 Grid Die set. The entire set available at http://dicetest.com
by
mctrivia
One of 191 dice in my D6 Grid Die set. The entire set available at http://dicetest.com
by
mctrivia
One of 191 dice in my D6 Grid Die set. The entire set available at http://dicetest.com
by
mctrivia
One of 191 dice in my D6 Grid Die set. The entire set available at http://dicetest.com
by
mctrivia
One of 191 dice in my D6 Grid Die set. The entire set available at http://dicetest.com
by
mctrivia
One of 191 dice in my D6 Grid Die set. The entire set available at http://dicetest.com
by
mctrivia
One of 191 dice in my D6 Grid Die set. The entire set available at http://dicetest.com
by
mctrivia
One of 191 dice in my D6 Grid Die set. The entire set available at http://dicetest.com
by
mctrivia
One of 191 dice in my D6 Grid Die set. The entire set available at http://dicetest.com
by
mctrivia
One of 191 dice in my D6 Grid Die set. The entire set available at http://dicetest.com
Shop Details
Expertise
- 3D modeler
- Designer
- Product designer
Shop Sections
- All Sections
- Build Type[Frame]
- Build Type[Hollow]
- Build Type[Points]
- Build Type[Solid]
- Build Type[Truncated Sphere]
- Customizable
- Dice Set[Crystal]
- Dice Set[Dual]
- Dice Set[Frameless]
- Dice Set[Grid]
- Dice Set[Points]
- Dice Set[Prime]
- Material[Glass]
- Material[Metal]
- Non Dice
- Sides[002]
- Sides[003]
- Sides[004]
- Sides[005]
- Sides[006]
- Sides[007]
- Sides[008]
- Sides[009]
- Sides[010]
- Sides[011]
- Sides[012]
- Sides[013]
- Sides[015]
- Sides[016]
- Sides[017]
- Sides[018]
- Sides[019]
- Sides[020]
- Sides[022]
- Sides[024]
- Sides[025]
- Sides[028]
- Sides[030]
- Sides[034]
- Sides[036]
- Sides[040]
- Sides[048]
- Sides[060]
- Sides[100]
- Sides[144]
- Sides[256]
- Specialty[4D]
- Specialty[Data]
- Specialty[Loaded]
- Specialty[Lottery]
- Specialty[Math]
- Specialty[Obfuscation]
- Specialty[Shell]
- Specialty[Time]
- Vinshi's Designs
