GeoBling is selling 679 products in Jewelry section
by
GeoBling
Pendant shaped like Spain including terrain data. Sized approximately 3.5cm by 3.5cm with a hook on the back to attach to necklaces.
The GeoBling series of jewelry started in 2011 by the Society for Printable Geography uses data from NASA's Shuttle Radar Topography mission to create artifacts resembling the countries of the world with realistic terrain information. Our complex algorithms created by computational geometry and geodata experts can create a custom piece of jewelry for almost any country in the world within seconds.
The thickness of this pendant is between 1mm (where the country is low) and 4mm (the highest peaks). A solid closed hook (no moving parts) on the rear allows attaching this pendant to a necklace. The necklace must fit through a hole sized 4mm by 3mm. Please contact us if you are interested in a different size, a country not currently available on Shapeways or with specific requests for dimensions.
The GeoBling series of jewelry started in 2011 by the Society for Printable Geography uses data from NASA's Shuttle Radar Topography mission to create artifacts resembling the countries of the world with realistic terrain information. Our complex algorithms created by computational geometry and geodata experts can create a custom piece of jewelry for almost any country in the world within seconds.
The thickness of this pendant is between 1mm (where the country is low) and 4mm (the highest peaks). A solid closed hook (no moving parts) on the rear allows attaching this pendant to a necklace. The necklace must fit through a hole sized 4mm by 3mm. Please contact us if you are interested in a different size, a country not currently available on Shapeways or with specific requests for dimensions.
by
GeoBling
Pendant shaped like Australia including terrain data. Sized approximately 3.5cm by 3.5cm with a hook on the back to attach to necklaces.
The GeoBling series of jewelry started in 2011 by the Society for Printable Geography uses data from NASA's Shuttle Radar Topography mission to create artifacts resembling the countries of the world with realistic terrain information. Our complex algorithms created by computational geometry and geodata experts can create a custom piece of jewelry for almost any country in the world within seconds.
The thickness of this pendant is between 1mm (where the country is low) and 4mm (the highest peaks). A solid closed hook (no moving parts) on the rear allows attaching this pendant to a necklace. The necklace must fit through a hole sized 4mm by 3mm. Please contact us if you are interested in a different size, a country not currently available on Shapeways or with specific requests for dimensions.
The GeoBling series of jewelry started in 2011 by the Society for Printable Geography uses data from NASA's Shuttle Radar Topography mission to create artifacts resembling the countries of the world with realistic terrain information. Our complex algorithms created by computational geometry and geodata experts can create a custom piece of jewelry for almost any country in the world within seconds.
The thickness of this pendant is between 1mm (where the country is low) and 4mm (the highest peaks). A solid closed hook (no moving parts) on the rear allows attaching this pendant to a necklace. The necklace must fit through a hole sized 4mm by 3mm. Please contact us if you are interested in a different size, a country not currently available on Shapeways or with specific requests for dimensions.
by
GeoBling
Pendant shaped like Germany including terrain data. Approximately 3.5cm long with a hook on top to attach to necklaces.
The GeoBling series of jewelry started in 2011 by the Society for Printable Geography uses data from NASA's Shuttle Radar Topography mission to create artifacts resembling the countries of the world with realistic terrain information. Our complex algorithms created by computational geometry and geodata experts can create a custom piece of jewelry for almost any country in the world within seconds.
The thickness of this pendant is between 1mm (where the country is low) and 4mm (the highest peaks). A solid closed hook (no moving parts) on the top allows attaching this pendant to a necklace. The necklace must fit through a hole sized 3mm. Please contact us if you are interested in a different size, a country not currently available on Shapeways or with specific requests for dimensions.
The GeoBling series of jewelry started in 2011 by the Society for Printable Geography uses data from NASA's Shuttle Radar Topography mission to create artifacts resembling the countries of the world with realistic terrain information. Our complex algorithms created by computational geometry and geodata experts can create a custom piece of jewelry for almost any country in the world within seconds.
The thickness of this pendant is between 1mm (where the country is low) and 4mm (the highest peaks). A solid closed hook (no moving parts) on the top allows attaching this pendant to a necklace. The necklace must fit through a hole sized 3mm. Please contact us if you are interested in a different size, a country not currently available on Shapeways or with specific requests for dimensions.
by
GeoBling
Pendant shaped like France including terrain data. Sized approximately 3.5cm by 3.5cm with a hook on the top to attach to necklaces.
The GeoBling series of jewelry started in 2011 by the Society for Printable Geography uses data from NASA's Shuttle Radar Topography mission to create artifacts resembling the countries of the world with realistic terrain information. Our complex algorithms created by computational geometry and geodata experts can create a custom piece of jewelry for almost any country in the world within seconds.
The thickness of this pendant is between 1mm (where the country is low) and 4mm (the highest peaks). A solid closed hook (no moving parts) on the top allows attaching this pendant to a necklace. The necklace must fit through a hole sized 3mm. Please contact us if you are interested in a different size, a country not currently available on Shapeways or with specific requests for dimensions.
The GeoBling series of jewelry started in 2011 by the Society for Printable Geography uses data from NASA's Shuttle Radar Topography mission to create artifacts resembling the countries of the world with realistic terrain information. Our complex algorithms created by computational geometry and geodata experts can create a custom piece of jewelry for almost any country in the world within seconds.
The thickness of this pendant is between 1mm (where the country is low) and 4mm (the highest peaks). A solid closed hook (no moving parts) on the top allows attaching this pendant to a necklace. The necklace must fit through a hole sized 3mm. Please contact us if you are interested in a different size, a country not currently available on Shapeways or with specific requests for dimensions.
by
GeoBling
Pendant shaped like Aruba including terrain data. Sized approximately 3.5cm by 3.5cm with a hook on the back to attach to necklaces.
The GeoBling series of jewelry started in 2011 by the Society for Printable Geography uses data from NASA's Shuttle Radar Topography mission to create artifacts resembling the countries of the world with realistic terrain information. Our complex algorithms created by computational geometry and geodata experts can create a custom piece of jewelry for almost any country in the world within seconds.
The thickness of this pendant is between 1mm (where the country is low) and 4mm (the highest peaks). A solid closed hook (no moving parts) on the rear allows attaching this pendant to a necklace. The necklace must fit through a hole sized 4mm by 3mm. Please contact us if you are interested in a different size, a country not currently available on Shapeways or with specific requests for dimensions.
The GeoBling series of jewelry started in 2011 by the Society for Printable Geography uses data from NASA's Shuttle Radar Topography mission to create artifacts resembling the countries of the world with realistic terrain information. Our complex algorithms created by computational geometry and geodata experts can create a custom piece of jewelry for almost any country in the world within seconds.
The thickness of this pendant is between 1mm (where the country is low) and 4mm (the highest peaks). A solid closed hook (no moving parts) on the rear allows attaching this pendant to a necklace. The necklace must fit through a hole sized 4mm by 3mm. Please contact us if you are interested in a different size, a country not currently available on Shapeways or with specific requests for dimensions.
by
GeoBling
Pendant shaped like Argentina including terrain data. Sized approximately 3.5cm by 3.5cm with a hook on the back to attach to necklaces.
The GeoBling series of jewelry started in 2011 by the Society for Printable Geography uses data from NASA's Shuttle Radar Topography mission to create artifacts resembling the countries of the world with realistic terrain information. Our complex algorithms created by computational geometry and geodata experts can create a custom piece of jewelry for almost any country in the world within seconds.
The thickness of this pendant is between 1mm (where the country is low) and 4mm (the highest peaks). A solid closed hook (no moving parts) on the rear allows attaching this pendant to a necklace. The necklace must fit through a hole sized 4mm by 3mm. Please contact us if you are interested in a different size, a country not currently available on Shapeways or with specific requests for dimensions.
The GeoBling series of jewelry started in 2011 by the Society for Printable Geography uses data from NASA's Shuttle Radar Topography mission to create artifacts resembling the countries of the world with realistic terrain information. Our complex algorithms created by computational geometry and geodata experts can create a custom piece of jewelry for almost any country in the world within seconds.
The thickness of this pendant is between 1mm (where the country is low) and 4mm (the highest peaks). A solid closed hook (no moving parts) on the rear allows attaching this pendant to a necklace. The necklace must fit through a hole sized 4mm by 3mm. Please contact us if you are interested in a different size, a country not currently available on Shapeways or with specific requests for dimensions.
by
GeoBling
Pendant shaped like United Arab Emirates including terrain data. Sized approximately 3.5cm by 3.5cm with a hook on the back to attach to necklaces.
The GeoBling series of jewelry started in 2011 by the Society for Printable Geography uses data from NASA's Shuttle Radar Topography mission to create artifacts resembling the countries of the world with realistic terrain information. Our complex algorithms created by computational geometry and geodata experts can create a custom piece of jewelry for almost any country in the world within seconds.
The thickness of this pendant is between 1mm (where the country is low) and 4mm (the highest peaks). A solid closed hook (no moving parts) on the rear allows attaching this pendant to a necklace. The necklace must fit through a hole sized 4mm by 3mm. Please contact us if you are interested in a different size, a country not currently available on Shapeways or with specific requests for dimensions.
The GeoBling series of jewelry started in 2011 by the Society for Printable Geography uses data from NASA's Shuttle Radar Topography mission to create artifacts resembling the countries of the world with realistic terrain information. Our complex algorithms created by computational geometry and geodata experts can create a custom piece of jewelry for almost any country in the world within seconds.
The thickness of this pendant is between 1mm (where the country is low) and 4mm (the highest peaks). A solid closed hook (no moving parts) on the rear allows attaching this pendant to a necklace. The necklace must fit through a hole sized 4mm by 3mm. Please contact us if you are interested in a different size, a country not currently available on Shapeways or with specific requests for dimensions.
by
GeoBling
Pendant shaped like Albania including terrain data. Sized approximately 3.5cm by 3.5cm with a hook on the back to attach to necklaces.
The GeoBling series of jewelry started in 2011 by the Society for Printable Geography uses data from NASA's Shuttle Radar Topography mission to create artifacts resembling the countries of the world with realistic terrain information. Our complex algorithms created by computational geometry and geodata experts can create a custom piece of jewelry for almost any country in the world within seconds.
The thickness of this pendant is between 1mm (where the country is low) and 4mm (the highest peaks). A solid closed hook (no moving parts) on the rear allows attaching this pendant to a necklace. The necklace must fit through a hole sized 4mm by 3mm. Please contact us if you are interested in a different size, a country not currently available on Shapeways or with specific requests for dimensions.
The GeoBling series of jewelry started in 2011 by the Society for Printable Geography uses data from NASA's Shuttle Radar Topography mission to create artifacts resembling the countries of the world with realistic terrain information. Our complex algorithms created by computational geometry and geodata experts can create a custom piece of jewelry for almost any country in the world within seconds.
The thickness of this pendant is between 1mm (where the country is low) and 4mm (the highest peaks). A solid closed hook (no moving parts) on the rear allows attaching this pendant to a necklace. The necklace must fit through a hole sized 4mm by 3mm. Please contact us if you are interested in a different size, a country not currently available on Shapeways or with specific requests for dimensions.
by
GeoBling
Pendant shaped like Angola including terrain data. Sized approximately 3.5cm by 3.5cm with a hook on the back to attach to necklaces.
The GeoBling series of jewelry started in 2011 by the Society for Printable Geography uses data from NASA's Shuttle Radar Topography mission to create artifacts resembling the countries of the world with realistic terrain information. Our complex algorithms created by computational geometry and geodata experts can create a custom piece of jewelry for almost any country in the world within seconds.
The thickness of this pendant is between 1mm (where the country is low) and 4mm (the highest peaks). A solid closed hook (no moving parts) on the rear allows attaching this pendant to a necklace. The necklace must fit through a hole sized 4mm by 3mm. Please contact us if you are interested in a different size, a country not currently available on Shapeways or with specific requests for dimensions.
The GeoBling series of jewelry started in 2011 by the Society for Printable Geography uses data from NASA's Shuttle Radar Topography mission to create artifacts resembling the countries of the world with realistic terrain information. Our complex algorithms created by computational geometry and geodata experts can create a custom piece of jewelry for almost any country in the world within seconds.
The thickness of this pendant is between 1mm (where the country is low) and 4mm (the highest peaks). A solid closed hook (no moving parts) on the rear allows attaching this pendant to a necklace. The necklace must fit through a hole sized 4mm by 3mm. Please contact us if you are interested in a different size, a country not currently available on Shapeways or with specific requests for dimensions.
by
GeoBling
Pendant shaped like Afghanistan including terrain data. Sized approximately 3.5cm by 3.5cm with a hook on the back to attach to necklaces.
The GeoBling series of jewelry started in 2011 by the Society for Printable Geography uses data from NASA's Shuttle Radar Topography mission to create artifacts resembling the countries of the world with realistic terrain information. Our complex algorithms created by computational geometry and geodata experts can create a custom piece of jewelry for almost any country in the world within seconds.
The thickness of this pendant is between 1mm (where the country is low) and 4mm (the highest peaks). A solid closed hook (no moving parts) on the rear allows attaching this pendant to a necklace. The necklace must fit through a hole sized 4mm by 3mm. Please contact us if you are interested in a different size, a country not currently available on Shapeways or with specific requests for dimensions.
The GeoBling series of jewelry started in 2011 by the Society for Printable Geography uses data from NASA's Shuttle Radar Topography mission to create artifacts resembling the countries of the world with realistic terrain information. Our complex algorithms created by computational geometry and geodata experts can create a custom piece of jewelry for almost any country in the world within seconds.
The thickness of this pendant is between 1mm (where the country is low) and 4mm (the highest peaks). A solid closed hook (no moving parts) on the rear allows attaching this pendant to a necklace. The necklace must fit through a hole sized 4mm by 3mm. Please contact us if you are interested in a different size, a country not currently available on Shapeways or with specific requests for dimensions.
by
GeoBling
Pendant shaped like Andorra including terrain data. Sized approximately 3.5cm by 3.5cm with a hook on the back to attach to necklaces.
The GeoBling series of jewelry started in 2011 by the Society for Printable Geography uses data from NASA's Shuttle Radar Topography mission to create artifacts resembling the countries of the world with realistic terrain information. Our complex algorithms created by computational geometry and geodata experts can create a custom piece of jewelry for almost any country in the world within seconds.
The thickness of this pendant is between 1mm (where the country is low) and 4mm (the highest peaks). A solid closed hook (no moving parts) on the rear allows attaching this pendant to a necklace. The necklace must fit through a hole sized 4mm by 3mm. Please contact us if you are interested in a different size, a country not currently available on Shapeways or with specific requests for dimensions.
The GeoBling series of jewelry started in 2011 by the Society for Printable Geography uses data from NASA's Shuttle Radar Topography mission to create artifacts resembling the countries of the world with realistic terrain information. Our complex algorithms created by computational geometry and geodata experts can create a custom piece of jewelry for almost any country in the world within seconds.
The thickness of this pendant is between 1mm (where the country is low) and 4mm (the highest peaks). A solid closed hook (no moving parts) on the rear allows attaching this pendant to a necklace. The necklace must fit through a hole sized 4mm by 3mm. Please contact us if you are interested in a different size, a country not currently available on Shapeways or with specific requests for dimensions.
by
GeoBling
Pendant shaped like Barbados including terrain data. Sized approximately 3.5cm by 3.5cm with a hook on the back to attach to necklaces.
The GeoBling series of jewelry started in 2011 by the Society for Printable Geography uses data from NASA's Shuttle Radar Topography mission to create artifacts resembling the countries of the world with realistic terrain information. Our complex algorithms created by computational geometry and geodata experts can create a custom piece of jewelry for almost any country in the world within seconds.
The thickness of this pendant is between 1mm (where the country is low) and 4mm (the highest peaks). A solid closed hook (no moving parts) on the rear allows attaching this pendant to a necklace. The necklace must fit through a hole sized 4mm by 3mm. Please contact us if you are interested in a different size, a country not currently available on Shapeways or with specific requests for dimensions.
The GeoBling series of jewelry started in 2011 by the Society for Printable Geography uses data from NASA's Shuttle Radar Topography mission to create artifacts resembling the countries of the world with realistic terrain information. Our complex algorithms created by computational geometry and geodata experts can create a custom piece of jewelry for almost any country in the world within seconds.
The thickness of this pendant is between 1mm (where the country is low) and 4mm (the highest peaks). A solid closed hook (no moving parts) on the rear allows attaching this pendant to a necklace. The necklace must fit through a hole sized 4mm by 3mm. Please contact us if you are interested in a different size, a country not currently available on Shapeways or with specific requests for dimensions.
Shop Details
Expertise
- 3D modeler
- Designer
- Product designer
- Artist
- Maker
Shop Sections
