We found 855 products by GeoBling
by
GeoBling
Pendant shaped like Bosnia and Herzegovina including terrain data. Sized approximately 3.5cm by 3.5cm with a hook on the back to attach to necklaces.
The GeoBling series of jewelry started in 2011 by the Society for Printable Geography uses data from NASA's Shuttle Radar Topography mission to create artifacts resembling the countries of the world with realistic terrain information. Our complex algorithms created by computational geometry and geodata experts can create a custom piece of jewelry for almost any country in the world within seconds.
The thickness of this pendant is between 1mm (where the country is low) and 4mm (the highest peaks). A solid closed hook (no moving parts) on the rear allows attaching this pendant to a necklace. The necklace must fit through a hole sized 4mm by 3mm. Please contact us if you are interested in a different size, a country not currently available on Shapeways or with specific requests for dimensions.
The GeoBling series of jewelry started in 2011 by the Society for Printable Geography uses data from NASA's Shuttle Radar Topography mission to create artifacts resembling the countries of the world with realistic terrain information. Our complex algorithms created by computational geometry and geodata experts can create a custom piece of jewelry for almost any country in the world within seconds.
The thickness of this pendant is between 1mm (where the country is low) and 4mm (the highest peaks). A solid closed hook (no moving parts) on the rear allows attaching this pendant to a necklace. The necklace must fit through a hole sized 4mm by 3mm. Please contact us if you are interested in a different size, a country not currently available on Shapeways or with specific requests for dimensions.
by
GeoBling
Pendant shaped like Belarus including terrain data. Sized approximately 3.5cm by 3.5cm with a hook on the back to attach to necklaces.
The GeoBling series of jewelry started in 2011 by the Society for Printable Geography uses data from NASA's Shuttle Radar Topography mission to create artifacts resembling the countries of the world with realistic terrain information. Our complex algorithms created by computational geometry and geodata experts can create a custom piece of jewelry for almost any country in the world within seconds.
The thickness of this pendant is between 1mm (where the country is low) and 4mm (the highest peaks). A solid closed hook (no moving parts) on the rear allows attaching this pendant to a necklace. The necklace must fit through a hole sized 4mm by 3mm. Please contact us if you are interested in a different size, a country not currently available on Shapeways or with specific requests for dimensions.
The GeoBling series of jewelry started in 2011 by the Society for Printable Geography uses data from NASA's Shuttle Radar Topography mission to create artifacts resembling the countries of the world with realistic terrain information. Our complex algorithms created by computational geometry and geodata experts can create a custom piece of jewelry for almost any country in the world within seconds.
The thickness of this pendant is between 1mm (where the country is low) and 4mm (the highest peaks). A solid closed hook (no moving parts) on the rear allows attaching this pendant to a necklace. The necklace must fit through a hole sized 4mm by 3mm. Please contact us if you are interested in a different size, a country not currently available on Shapeways or with specific requests for dimensions.
by
GeoBling
Pendant shaped like Bolivia including terrain data. Sized approximately 3.5cm by 3.5cm with a hook on the back to attach to necklaces.
The GeoBling series of jewelry started in 2011 by the Society for Printable Geography uses data from NASA's Shuttle Radar Topography mission to create artifacts resembling the countries of the world with realistic terrain information. Our complex algorithms created by computational geometry and geodata experts can create a custom piece of jewelry for almost any country in the world within seconds.
The thickness of this pendant is between 1mm (where the country is low) and 4mm (the highest peaks). A solid closed hook (no moving parts) on the rear allows attaching this pendant to a necklace. The necklace must fit through a hole sized 4mm by 3mm. Please contact us if you are interested in a different size, a country not currently available on Shapeways or with specific requests for dimensions.
The GeoBling series of jewelry started in 2011 by the Society for Printable Geography uses data from NASA's Shuttle Radar Topography mission to create artifacts resembling the countries of the world with realistic terrain information. Our complex algorithms created by computational geometry and geodata experts can create a custom piece of jewelry for almost any country in the world within seconds.
The thickness of this pendant is between 1mm (where the country is low) and 4mm (the highest peaks). A solid closed hook (no moving parts) on the rear allows attaching this pendant to a necklace. The necklace must fit through a hole sized 4mm by 3mm. Please contact us if you are interested in a different size, a country not currently available on Shapeways or with specific requests for dimensions.
by
GeoBling
Pendant shaped like Brazil including terrain data. Sized approximately 3.5cm by 3.5cm with a hook on the back to attach to necklaces.
The GeoBling series of jewelry started in 2011 by the Society for Printable Geography uses data from NASA's Shuttle Radar Topography mission to create artifacts resembling the countries of the world with realistic terrain information. Our complex algorithms created by computational geometry and geodata experts can create a custom piece of jewelry for almost any country in the world within seconds.
The thickness of this pendant is between 1mm (where the country is low) and 4mm (the highest peaks). A solid closed hook (no moving parts) on the rear allows attaching this pendant to a necklace. The necklace must fit through a hole sized 4mm by 3mm. Please contact us if you are interested in a different size, a country not currently available on Shapeways or with specific requests for dimensions.
The GeoBling series of jewelry started in 2011 by the Society for Printable Geography uses data from NASA's Shuttle Radar Topography mission to create artifacts resembling the countries of the world with realistic terrain information. Our complex algorithms created by computational geometry and geodata experts can create a custom piece of jewelry for almost any country in the world within seconds.
The thickness of this pendant is between 1mm (where the country is low) and 4mm (the highest peaks). A solid closed hook (no moving parts) on the rear allows attaching this pendant to a necklace. The necklace must fit through a hole sized 4mm by 3mm. Please contact us if you are interested in a different size, a country not currently available on Shapeways or with specific requests for dimensions.
by
GeoBling
Pendant shaped like Brunei Darussalam including terrain data. Sized approximately 3.5cm by 3.5cm with a hook on the back to attach to necklaces.
The GeoBling series of jewelry started in 2011 by the Society for Printable Geography uses data from NASA's Shuttle Radar Topography mission to create artifacts resembling the countries of the world with realistic terrain information. Our complex algorithms created by computational geometry and geodata experts can create a custom piece of jewelry for almost any country in the world within seconds.
The thickness of this pendant is between 1mm (where the country is low) and 4mm (the highest peaks). A solid closed hook (no moving parts) on the rear allows attaching this pendant to a necklace. The necklace must fit through a hole sized 4mm by 3mm. Please contact us if you are interested in a different size, a country not currently available on Shapeways or with specific requests for dimensions.
The GeoBling series of jewelry started in 2011 by the Society for Printable Geography uses data from NASA's Shuttle Radar Topography mission to create artifacts resembling the countries of the world with realistic terrain information. Our complex algorithms created by computational geometry and geodata experts can create a custom piece of jewelry for almost any country in the world within seconds.
The thickness of this pendant is between 1mm (where the country is low) and 4mm (the highest peaks). A solid closed hook (no moving parts) on the rear allows attaching this pendant to a necklace. The necklace must fit through a hole sized 4mm by 3mm. Please contact us if you are interested in a different size, a country not currently available on Shapeways or with specific requests for dimensions.
by
GeoBling
Pendant shaped like Bhutan including terrain data. Sized approximately 3.5cm by 3.5cm with a hook on the back to attach to necklaces.
The GeoBling series of jewelry started in 2011 by the Society for Printable Geography uses data from NASA's Shuttle Radar Topography mission to create artifacts resembling the countries of the world with realistic terrain information. Our complex algorithms created by computational geometry and geodata experts can create a custom piece of jewelry for almost any country in the world within seconds.
The thickness of this pendant is between 1mm (where the country is low) and 4mm (the highest peaks). A solid closed hook (no moving parts) on the rear allows attaching this pendant to a necklace. The necklace must fit through a hole sized 4mm by 3mm. Please contact us if you are interested in a different size, a country not currently available on Shapeways or with specific requests for dimensions.
The GeoBling series of jewelry started in 2011 by the Society for Printable Geography uses data from NASA's Shuttle Radar Topography mission to create artifacts resembling the countries of the world with realistic terrain information. Our complex algorithms created by computational geometry and geodata experts can create a custom piece of jewelry for almost any country in the world within seconds.
The thickness of this pendant is between 1mm (where the country is low) and 4mm (the highest peaks). A solid closed hook (no moving parts) on the rear allows attaching this pendant to a necklace. The necklace must fit through a hole sized 4mm by 3mm. Please contact us if you are interested in a different size, a country not currently available on Shapeways or with specific requests for dimensions.
by
GeoBling
Pendant shaped like Switzerland including terrain data. Approximately 3.2cm wide and 2.5cm high with a hook on top to attach to necklaces.
The GeoBling series of jewelry started in 2011 by the Society for Printable Geography uses data from NASA's Shuttle Radar Topography mission to create artifacts resembling the countries of the world with realistic terrain information. Our complex algorithms created by computational geometry and geodata experts can create a custom piece of jewelry for almost any country in the world within seconds.
The thickness of this pendant is between 1mm (where the country is low) and 4mm (the highest peaks). A solid closed hook (no moving parts) on the top allows attaching this pendant to a necklace. The necklace must fit through a hole sized 3mm. Please contact us if you are interested in a different size, a country not currently available on Shapeways or with specific requests for dimensions.
The GeoBling series of jewelry started in 2011 by the Society for Printable Geography uses data from NASA's Shuttle Radar Topography mission to create artifacts resembling the countries of the world with realistic terrain information. Our complex algorithms created by computational geometry and geodata experts can create a custom piece of jewelry for almost any country in the world within seconds.
The thickness of this pendant is between 1mm (where the country is low) and 4mm (the highest peaks). A solid closed hook (no moving parts) on the top allows attaching this pendant to a necklace. The necklace must fit through a hole sized 3mm. Please contact us if you are interested in a different size, a country not currently available on Shapeways or with specific requests for dimensions.
by
GeoBling
Pendant shaped like Botswana including terrain data. Sized approximately 3.5cm by 3.5cm with a hook on the back to attach to necklaces.
The GeoBling series of jewelry started in 2011 by the Society for Printable Geography uses data from NASA's Shuttle Radar Topography mission to create artifacts resembling the countries of the world with realistic terrain information. Our complex algorithms created by computational geometry and geodata experts can create a custom piece of jewelry for almost any country in the world within seconds.
The thickness of this pendant is between 1mm (where the country is low) and 4mm (the highest peaks). A solid closed hook (no moving parts) on the rear allows attaching this pendant to a necklace. The necklace must fit through a hole sized 4mm by 3mm. Please contact us if you are interested in a different size, a country not currently available on Shapeways or with specific requests for dimensions.
The GeoBling series of jewelry started in 2011 by the Society for Printable Geography uses data from NASA's Shuttle Radar Topography mission to create artifacts resembling the countries of the world with realistic terrain information. Our complex algorithms created by computational geometry and geodata experts can create a custom piece of jewelry for almost any country in the world within seconds.
The thickness of this pendant is between 1mm (where the country is low) and 4mm (the highest peaks). A solid closed hook (no moving parts) on the rear allows attaching this pendant to a necklace. The necklace must fit through a hole sized 4mm by 3mm. Please contact us if you are interested in a different size, a country not currently available on Shapeways or with specific requests for dimensions.
by
GeoBling
Pendant shaped like Central African Republic including terrain data. Sized approximately 3.5cm by 3.5cm with a hook on the back to attach to necklaces.
The GeoBling series of jewelry started in 2011 by the Society for Printable Geography uses data from NASA's Shuttle Radar Topography mission to create artifacts resembling the countries of the world with realistic terrain information. Our complex algorithms created by computational geometry and geodata experts can create a custom piece of jewelry for almost any country in the world within seconds.
The thickness of this pendant is between 1mm (where the country is low) and 4mm (the highest peaks). A solid closed hook (no moving parts) on the rear allows attaching this pendant to a necklace. The necklace must fit through a hole sized 4mm by 3mm. Please contact us if you are interested in a different size, a country not currently available on Shapeways or with specific requests for dimensions.
The GeoBling series of jewelry started in 2011 by the Society for Printable Geography uses data from NASA's Shuttle Radar Topography mission to create artifacts resembling the countries of the world with realistic terrain information. Our complex algorithms created by computational geometry and geodata experts can create a custom piece of jewelry for almost any country in the world within seconds.
The thickness of this pendant is between 1mm (where the country is low) and 4mm (the highest peaks). A solid closed hook (no moving parts) on the rear allows attaching this pendant to a necklace. The necklace must fit through a hole sized 4mm by 3mm. Please contact us if you are interested in a different size, a country not currently available on Shapeways or with specific requests for dimensions.
by
GeoBling
Pendant shaped like Canada including terrain data. Sized approximately 3.5cm by 3.5cm with a hook on the back to attach to necklaces.
The GeoBling series of jewelry started in 2011 by the Society for Printable Geography uses data from NASA's Shuttle Radar Topography mission to create artifacts resembling the countries of the world with realistic terrain information. Our complex algorithms created by computational geometry and geodata experts can create a custom piece of jewelry for almost any country in the world within seconds.
The thickness of this pendant is between 1mm (where the country is low) and 4mm (the highest peaks). A solid closed hook (no moving parts) on the rear allows attaching this pendant to a necklace. The necklace must fit through a hole sized 4mm by 3mm. Please contact us if you are interested in a different size, a country not currently available on Shapeways or with specific requests for dimensions.
The GeoBling series of jewelry started in 2011 by the Society for Printable Geography uses data from NASA's Shuttle Radar Topography mission to create artifacts resembling the countries of the world with realistic terrain information. Our complex algorithms created by computational geometry and geodata experts can create a custom piece of jewelry for almost any country in the world within seconds.
The thickness of this pendant is between 1mm (where the country is low) and 4mm (the highest peaks). A solid closed hook (no moving parts) on the rear allows attaching this pendant to a necklace. The necklace must fit through a hole sized 4mm by 3mm. Please contact us if you are interested in a different size, a country not currently available on Shapeways or with specific requests for dimensions.
by
GeoBling
Pendant shaped like China including terrain data. Sized approximately 3.5cm by 3.5cm with a hook on the back to attach to necklaces.
The GeoBling series of jewelry started in 2011 by the Society for Printable Geography uses data from NASA's Shuttle Radar Topography mission to create artifacts resembling the countries of the world with realistic terrain information. Our complex algorithms created by computational geometry and geodata experts can create a custom piece of jewelry for almost any country in the world within seconds.
The thickness of this pendant is between 1mm (where the country is low) and 4mm (the highest peaks). A solid closed hook (no moving parts) on the rear allows attaching this pendant to a necklace. The necklace must fit through a hole sized 4mm by 3mm. Please contact us if you are interested in a different size, a country not currently available on Shapeways or with specific requests for dimensions.
The GeoBling series of jewelry started in 2011 by the Society for Printable Geography uses data from NASA's Shuttle Radar Topography mission to create artifacts resembling the countries of the world with realistic terrain information. Our complex algorithms created by computational geometry and geodata experts can create a custom piece of jewelry for almost any country in the world within seconds.
The thickness of this pendant is between 1mm (where the country is low) and 4mm (the highest peaks). A solid closed hook (no moving parts) on the rear allows attaching this pendant to a necklace. The necklace must fit through a hole sized 4mm by 3mm. Please contact us if you are interested in a different size, a country not currently available on Shapeways or with specific requests for dimensions.
by
GeoBling
Pendant shaped like Chile including terrain data. Sized approximately 3.5cm by 3.5cm with a hook on the back to attach to necklaces.
The GeoBling series of jewelry started in 2011 by the Society for Printable Geography uses data from NASA's Shuttle Radar Topography mission to create artifacts resembling the countries of the world with realistic terrain information. Our complex algorithms created by computational geometry and geodata experts can create a custom piece of jewelry for almost any country in the world within seconds.
The thickness of this pendant is between 1mm (where the country is low) and 4mm (the highest peaks). A solid closed hook (no moving parts) on the rear allows attaching this pendant to a necklace. The necklace must fit through a hole sized 4mm by 3mm. Please contact us if you are interested in a different size, a country not currently available on Shapeways or with specific requests for dimensions.
The GeoBling series of jewelry started in 2011 by the Society for Printable Geography uses data from NASA's Shuttle Radar Topography mission to create artifacts resembling the countries of the world with realistic terrain information. Our complex algorithms created by computational geometry and geodata experts can create a custom piece of jewelry for almost any country in the world within seconds.
The thickness of this pendant is between 1mm (where the country is low) and 4mm (the highest peaks). A solid closed hook (no moving parts) on the rear allows attaching this pendant to a necklace. The necklace must fit through a hole sized 4mm by 3mm. Please contact us if you are interested in a different size, a country not currently available on Shapeways or with specific requests for dimensions.
by
GeoBling
Pendant shaped like Ivory Coast including terrain data. Sized approximately 3.5cm by 3.5cm with a hook on the back to attach to necklaces.
The GeoBling series of jewelry started in 2011 by the Society for Printable Geography uses data from NASA's Shuttle Radar Topography mission to create artifacts resembling the countries of the world with realistic terrain information. Our complex algorithms created by computational geometry and geodata experts can create a custom piece of jewelry for almost any country in the world within seconds.
The thickness of this pendant is between 1mm (where the country is low) and 4mm (the highest peaks). A solid closed hook (no moving parts) on the rear allows attaching this pendant to a necklace. The necklace must fit through a hole sized 4mm by 3mm. Please contact us if you are interested in a different size, a country not currently available on Shapeways or with specific requests for dimensions.
The GeoBling series of jewelry started in 2011 by the Society for Printable Geography uses data from NASA's Shuttle Radar Topography mission to create artifacts resembling the countries of the world with realistic terrain information. Our complex algorithms created by computational geometry and geodata experts can create a custom piece of jewelry for almost any country in the world within seconds.
The thickness of this pendant is between 1mm (where the country is low) and 4mm (the highest peaks). A solid closed hook (no moving parts) on the rear allows attaching this pendant to a necklace. The necklace must fit through a hole sized 4mm by 3mm. Please contact us if you are interested in a different size, a country not currently available on Shapeways or with specific requests for dimensions.
by
GeoBling
Pendant shaped like Cameroon including terrain data. Sized approximately 3.5cm by 3.5cm with a hook on the back to attach to necklaces.
The GeoBling series of jewelry started in 2011 by the Society for Printable Geography uses data from NASA's Shuttle Radar Topography mission to create artifacts resembling the countries of the world with realistic terrain information. Our complex algorithms created by computational geometry and geodata experts can create a custom piece of jewelry for almost any country in the world within seconds.
The thickness of this pendant is between 1mm (where the country is low) and 4mm (the highest peaks). A solid closed hook (no moving parts) on the rear allows attaching this pendant to a necklace. The necklace must fit through a hole sized 4mm by 3mm. Please contact us if you are interested in a different size, a country not currently available on Shapeways or with specific requests for dimensions.
The GeoBling series of jewelry started in 2011 by the Society for Printable Geography uses data from NASA's Shuttle Radar Topography mission to create artifacts resembling the countries of the world with realistic terrain information. Our complex algorithms created by computational geometry and geodata experts can create a custom piece of jewelry for almost any country in the world within seconds.
The thickness of this pendant is between 1mm (where the country is low) and 4mm (the highest peaks). A solid closed hook (no moving parts) on the rear allows attaching this pendant to a necklace. The necklace must fit through a hole sized 4mm by 3mm. Please contact us if you are interested in a different size, a country not currently available on Shapeways or with specific requests for dimensions.
by
GeoBling
Pendant shaped like Ethiopia including terrain data. Sized approximately 3.5cm by 3.5cm with a hook on the back to attach to necklaces.
The GeoBling series of jewelry started in 2011 by the Society for Printable Geography uses data from NASA's Shuttle Radar Topography mission to create artifacts resembling the countries of the world with realistic terrain information. Our complex algorithms created by computational geometry and geodata experts can create a custom piece of jewelry for almost any country in the world within seconds.
The thickness of this pendant is between 1mm (where the country is low) and 4mm (the highest peaks). A solid closed hook (no moving parts) on the rear allows attaching this pendant to a necklace. The necklace must fit through a hole sized 4mm by 3mm. Please contact us if you are interested in a different size, a country not currently available on Shapeways or with specific requests for dimensions.
The GeoBling series of jewelry started in 2011 by the Society for Printable Geography uses data from NASA's Shuttle Radar Topography mission to create artifacts resembling the countries of the world with realistic terrain information. Our complex algorithms created by computational geometry and geodata experts can create a custom piece of jewelry for almost any country in the world within seconds.
The thickness of this pendant is between 1mm (where the country is low) and 4mm (the highest peaks). A solid closed hook (no moving parts) on the rear allows attaching this pendant to a necklace. The necklace must fit through a hole sized 4mm by 3mm. Please contact us if you are interested in a different size, a country not currently available on Shapeways or with specific requests for dimensions.
by
GeoBling
Pendant shaped like Democratic Republic of the Congo including terrain data. Sized approximately 3.5cm by 3.5cm with a hook on the back to attach to necklaces.
The GeoBling series of jewelry started in 2011 by the Society for Printable Geography uses data from NASA's Shuttle Radar Topography mission to create artifacts resembling the countries of the world with realistic terrain information. Our complex algorithms created by computational geometry and geodata experts can create a custom piece of jewelry for almost any country in the world within seconds.
The thickness of this pendant is between 1mm (where the country is low) and 4mm (the highest peaks). A solid closed hook (no moving parts) on the rear allows attaching this pendant to a necklace. The necklace must fit through a hole sized 4mm by 3mm. Please contact us if you are interested in a different size, a country not currently available on Shapeways or with specific requests for dimensions.
The GeoBling series of jewelry started in 2011 by the Society for Printable Geography uses data from NASA's Shuttle Radar Topography mission to create artifacts resembling the countries of the world with realistic terrain information. Our complex algorithms created by computational geometry and geodata experts can create a custom piece of jewelry for almost any country in the world within seconds.
The thickness of this pendant is between 1mm (where the country is low) and 4mm (the highest peaks). A solid closed hook (no moving parts) on the rear allows attaching this pendant to a necklace. The necklace must fit through a hole sized 4mm by 3mm. Please contact us if you are interested in a different size, a country not currently available on Shapeways or with specific requests for dimensions.
by
GeoBling
Pendant shaped like Colombia including terrain data. Sized approximately 3.5cm by 3.5cm with a hook on the back to attach to necklaces.
The GeoBling series of jewelry started in 2011 by the Society for Printable Geography uses data from NASA's Shuttle Radar Topography mission to create artifacts resembling the countries of the world with realistic terrain information. Our complex algorithms created by computational geometry and geodata experts can create a custom piece of jewelry for almost any country in the world within seconds.
The thickness of this pendant is between 1mm (where the country is low) and 4mm (the highest peaks). A solid closed hook (no moving parts) on the rear allows attaching this pendant to a necklace. The necklace must fit through a hole sized 4mm by 3mm. Please contact us if you are interested in a different size, a country not currently available on Shapeways or with specific requests for dimensions.
The GeoBling series of jewelry started in 2011 by the Society for Printable Geography uses data from NASA's Shuttle Radar Topography mission to create artifacts resembling the countries of the world with realistic terrain information. Our complex algorithms created by computational geometry and geodata experts can create a custom piece of jewelry for almost any country in the world within seconds.
The thickness of this pendant is between 1mm (where the country is low) and 4mm (the highest peaks). A solid closed hook (no moving parts) on the rear allows attaching this pendant to a necklace. The necklace must fit through a hole sized 4mm by 3mm. Please contact us if you are interested in a different size, a country not currently available on Shapeways or with specific requests for dimensions.
by
GeoBling
Pendant shaped like Costa Rica including terrain data. Sized approximately 3.5cm by 3.5cm with a hook on the back to attach to necklaces.
The GeoBling series of jewelry started in 2011 by the Society for Printable Geography uses data from NASA's Shuttle Radar Topography mission to create artifacts resembling the countries of the world with realistic terrain information. Our complex algorithms created by computational geometry and geodata experts can create a custom piece of jewelry for almost any country in the world within seconds.
The thickness of this pendant is between 1mm (where the country is low) and 4mm (the highest peaks). A solid closed hook (no moving parts) on the rear allows attaching this pendant to a necklace. The necklace must fit through a hole sized 4mm by 3mm. Please contact us if you are interested in a different size, a country not currently available on Shapeways or with specific requests for dimensions.
The GeoBling series of jewelry started in 2011 by the Society for Printable Geography uses data from NASA's Shuttle Radar Topography mission to create artifacts resembling the countries of the world with realistic terrain information. Our complex algorithms created by computational geometry and geodata experts can create a custom piece of jewelry for almost any country in the world within seconds.
The thickness of this pendant is between 1mm (where the country is low) and 4mm (the highest peaks). A solid closed hook (no moving parts) on the rear allows attaching this pendant to a necklace. The necklace must fit through a hole sized 4mm by 3mm. Please contact us if you are interested in a different size, a country not currently available on Shapeways or with specific requests for dimensions.
by
GeoBling
Pendant shaped like Cuba including terrain data. Sized approximately 3.5cm by 3.5cm with a hook at the top to attach to necklaces.
The GeoBling series of jewelry started in 2011 by the Society for Printable Geography uses data from NASA's Shuttle Radar Topography mission to create artifacts resembling the countries of the world with realistic terrain information. Our complex algorithms created by computational geometry and geodata experts can create a custom piece of jewelry for almost any country in the world within seconds.
The thickness of this pendant is between 1mm (where the country is low) and 4mm (the highest peaks). A solid closed hook (no moving parts) on the rear allows attaching this pendant to a necklace. The necklace must fit through a hole sized 4mm by 3mm. Please contact us if you are interested in a different size, a country not currently available on Shapeways or with specific requests for dimensions.
The GeoBling series of jewelry started in 2011 by the Society for Printable Geography uses data from NASA's Shuttle Radar Topography mission to create artifacts resembling the countries of the world with realistic terrain information. Our complex algorithms created by computational geometry and geodata experts can create a custom piece of jewelry for almost any country in the world within seconds.
The thickness of this pendant is between 1mm (where the country is low) and 4mm (the highest peaks). A solid closed hook (no moving parts) on the rear allows attaching this pendant to a necklace. The necklace must fit through a hole sized 4mm by 3mm. Please contact us if you are interested in a different size, a country not currently available on Shapeways or with specific requests for dimensions.
by
GeoBling
Pendant shaped like Cyprus including terrain data. Sized approximately 3.5cm by 3.5cm with a hook on the back to attach to necklaces.
The GeoBling series of jewelry started in 2011 by the Society for Printable Geography uses data from NASA's Shuttle Radar Topography mission to create artifacts resembling the countries of the world with realistic terrain information. Our complex algorithms created by computational geometry and geodata experts can create a custom piece of jewelry for almost any country in the world within seconds.
The thickness of this pendant is between 1mm (where the country is low) and 4mm (the highest peaks). A solid closed hook (no moving parts) on the rear allows attaching this pendant to a necklace. The necklace must fit through a hole sized 4mm by 3mm. Please contact us if you are interested in a different size, a country not currently available on Shapeways or with specific requests for dimensions.
The GeoBling series of jewelry started in 2011 by the Society for Printable Geography uses data from NASA's Shuttle Radar Topography mission to create artifacts resembling the countries of the world with realistic terrain information. Our complex algorithms created by computational geometry and geodata experts can create a custom piece of jewelry for almost any country in the world within seconds.
The thickness of this pendant is between 1mm (where the country is low) and 4mm (the highest peaks). A solid closed hook (no moving parts) on the rear allows attaching this pendant to a necklace. The necklace must fit through a hole sized 4mm by 3mm. Please contact us if you are interested in a different size, a country not currently available on Shapeways or with specific requests for dimensions.
by
GeoBling
Pendant shaped like Czech Republic including terrain data. Sized approximately 2.9cm wide by 2.5cm high with a hook on top to attach to necklaces.
The GeoBling series of jewelry started in 2011 by the Society for Printable Geography uses data from NASA's Shuttle Radar Topography mission to create artifacts resembling the countries of the world with realistic terrain information. Our complex algorithms created by computational geometry and geodata experts can create a custom piece of jewelry for almost any country in the world within seconds.
The thickness of this pendant is between 1mm (where the country is low) and 4mm (the highest peaks). A solid closed hook (no moving parts) on the top allows attaching this pendant to a necklace. The necklace must fit through a hole sized 3mm. Please contact us if you are interested in a different size, a country not currently available on Shapeways or with specific requests for dimensions.
The GeoBling series of jewelry started in 2011 by the Society for Printable Geography uses data from NASA's Shuttle Radar Topography mission to create artifacts resembling the countries of the world with realistic terrain information. Our complex algorithms created by computational geometry and geodata experts can create a custom piece of jewelry for almost any country in the world within seconds.
The thickness of this pendant is between 1mm (where the country is low) and 4mm (the highest peaks). A solid closed hook (no moving parts) on the top allows attaching this pendant to a necklace. The necklace must fit through a hole sized 3mm. Please contact us if you are interested in a different size, a country not currently available on Shapeways or with specific requests for dimensions.
by
GeoBling
Pendant shaped like Denmark including terrain data. Sized approximately 3.5cm by 3.5cm with a hook on the back to attach to necklaces.
The GeoBling series of jewelry started in 2011 by the Society for Printable Geography uses data from NASA's Shuttle Radar Topography mission to create artifacts resembling the countries of the world with realistic terrain information. Our complex algorithms created by computational geometry and geodata experts can create a custom piece of jewelry for almost any country in the world within seconds.
The thickness of this pendant is between 1mm (where the country is low) and 4mm (the highest peaks). A solid closed hook (no moving parts) on the rear allows attaching this pendant to a necklace. The necklace must fit through a hole sized 4mm by 3mm. Please contact us if you are interested in a different size, a country not currently available on Shapeways or with specific requests for dimensions.
The GeoBling series of jewelry started in 2011 by the Society for Printable Geography uses data from NASA's Shuttle Radar Topography mission to create artifacts resembling the countries of the world with realistic terrain information. Our complex algorithms created by computational geometry and geodata experts can create a custom piece of jewelry for almost any country in the world within seconds.
The thickness of this pendant is between 1mm (where the country is low) and 4mm (the highest peaks). A solid closed hook (no moving parts) on the rear allows attaching this pendant to a necklace. The necklace must fit through a hole sized 4mm by 3mm. Please contact us if you are interested in a different size, a country not currently available on Shapeways or with specific requests for dimensions.
by
GeoBling
Pendant shaped like Djibouti including terrain data. Sized approximately 3.5cm by 3.5cm with a hook on the back to attach to necklaces.
The GeoBling series of jewelry started in 2011 by the Society for Printable Geography uses data from NASA's Shuttle Radar Topography mission to create artifacts resembling the countries of the world with realistic terrain information. Our complex algorithms created by computational geometry and geodata experts can create a custom piece of jewelry for almost any country in the world within seconds.
The thickness of this pendant is between 1mm (where the country is low) and 4mm (the highest peaks). A solid closed hook (no moving parts) on the rear allows attaching this pendant to a necklace. The necklace must fit through a hole sized 4mm by 3mm. Please contact us if you are interested in a different size, a country not currently available on Shapeways or with specific requests for dimensions.
The GeoBling series of jewelry started in 2011 by the Society for Printable Geography uses data from NASA's Shuttle Radar Topography mission to create artifacts resembling the countries of the world with realistic terrain information. Our complex algorithms created by computational geometry and geodata experts can create a custom piece of jewelry for almost any country in the world within seconds.
The thickness of this pendant is between 1mm (where the country is low) and 4mm (the highest peaks). A solid closed hook (no moving parts) on the rear allows attaching this pendant to a necklace. The necklace must fit through a hole sized 4mm by 3mm. Please contact us if you are interested in a different size, a country not currently available on Shapeways or with specific requests for dimensions.
by
GeoBling
Pendant shaped like Dominica including terrain data. Sized approximately 3.5cm by 3.5cm with a hook on the back to attach to necklaces.
The GeoBling series of jewelry started in 2011 by the Society for Printable Geography uses data from NASA's Shuttle Radar Topography mission to create artifacts resembling the countries of the world with realistic terrain information. Our complex algorithms created by computational geometry and geodata experts can create a custom piece of jewelry for almost any country in the world within seconds.
The thickness of this pendant is between 1mm (where the country is low) and 4mm (the highest peaks). A solid closed hook (no moving parts) on the rear allows attaching this pendant to a necklace. The necklace must fit through a hole sized 4mm by 3mm. Please contact us if you are interested in a different size, a country not currently available on Shapeways or with specific requests for dimensions.
The GeoBling series of jewelry started in 2011 by the Society for Printable Geography uses data from NASA's Shuttle Radar Topography mission to create artifacts resembling the countries of the world with realistic terrain information. Our complex algorithms created by computational geometry and geodata experts can create a custom piece of jewelry for almost any country in the world within seconds.
The thickness of this pendant is between 1mm (where the country is low) and 4mm (the highest peaks). A solid closed hook (no moving parts) on the rear allows attaching this pendant to a necklace. The necklace must fit through a hole sized 4mm by 3mm. Please contact us if you are interested in a different size, a country not currently available on Shapeways or with specific requests for dimensions.
by
GeoBling
Pendant shaped like Dominican Republic including terrain data. Sized approximately 3.5cm by 3.5cm with a hook on the back to attach to necklaces.
The GeoBling series of jewelry started in 2011 by the Society for Printable Geography uses data from NASA's Shuttle Radar Topography mission to create artifacts resembling the countries of the world with realistic terrain information. Our complex algorithms created by computational geometry and geodata experts can create a custom piece of jewelry for almost any country in the world within seconds.
The thickness of this pendant is between 1mm (where the country is low) and 4mm (the highest peaks). A solid closed hook (no moving parts) on the rear allows attaching this pendant to a necklace. The necklace must fit through a hole sized 4mm by 3mm. Please contact us if you are interested in a different size, a country not currently available on Shapeways or with specific requests for dimensions.
The GeoBling series of jewelry started in 2011 by the Society for Printable Geography uses data from NASA's Shuttle Radar Topography mission to create artifacts resembling the countries of the world with realistic terrain information. Our complex algorithms created by computational geometry and geodata experts can create a custom piece of jewelry for almost any country in the world within seconds.
The thickness of this pendant is between 1mm (where the country is low) and 4mm (the highest peaks). A solid closed hook (no moving parts) on the rear allows attaching this pendant to a necklace. The necklace must fit through a hole sized 4mm by 3mm. Please contact us if you are interested in a different size, a country not currently available on Shapeways or with specific requests for dimensions.
by
GeoBling
Pendant shaped like Algeria including terrain data. Sized approximately 3.5cm by 3.5cm with a hook on the back to attach to necklaces.
The GeoBling series of jewelry started in 2011 by the Society for Printable Geography uses data from NASA's Shuttle Radar Topography mission to create artifacts resembling the countries of the world with realistic terrain information. Our complex algorithms created by computational geometry and geodata experts can create a custom piece of jewelry for almost any country in the world within seconds.
The thickness of this pendant is between 1mm (where the country is low) and 4mm (the highest peaks). A solid closed hook (no moving parts) on the rear allows attaching this pendant to a necklace. The necklace must fit through a hole sized 4mm by 3mm. Please contact us if you are interested in a different size, a country not currently available on Shapeways or with specific requests for dimensions.
The GeoBling series of jewelry started in 2011 by the Society for Printable Geography uses data from NASA's Shuttle Radar Topography mission to create artifacts resembling the countries of the world with realistic terrain information. Our complex algorithms created by computational geometry and geodata experts can create a custom piece of jewelry for almost any country in the world within seconds.
The thickness of this pendant is between 1mm (where the country is low) and 4mm (the highest peaks). A solid closed hook (no moving parts) on the rear allows attaching this pendant to a necklace. The necklace must fit through a hole sized 4mm by 3mm. Please contact us if you are interested in a different size, a country not currently available on Shapeways or with specific requests for dimensions.
by
GeoBling
Pendant shaped like Ecuador including terrain data. Sized approximately 3.5cm by 3.5cm with a hook on the back to attach to necklaces.
The GeoBling series of jewelry started in 2011 by the Society for Printable Geography uses data from NASA's Shuttle Radar Topography mission to create artifacts resembling the countries of the world with realistic terrain information. Our complex algorithms created by computational geometry and geodata experts can create a custom piece of jewelry for almost any country in the world within seconds.
The thickness of this pendant is between 1mm (where the country is low) and 4mm (the highest peaks). A solid closed hook (no moving parts) on the rear allows attaching this pendant to a necklace. The necklace must fit through a hole sized 4mm by 3mm. Please contact us if you are interested in a different size, a country not currently available on Shapeways or with specific requests for dimensions.
The GeoBling series of jewelry started in 2011 by the Society for Printable Geography uses data from NASA's Shuttle Radar Topography mission to create artifacts resembling the countries of the world with realistic terrain information. Our complex algorithms created by computational geometry and geodata experts can create a custom piece of jewelry for almost any country in the world within seconds.
The thickness of this pendant is between 1mm (where the country is low) and 4mm (the highest peaks). A solid closed hook (no moving parts) on the rear allows attaching this pendant to a necklace. The necklace must fit through a hole sized 4mm by 3mm. Please contact us if you are interested in a different size, a country not currently available on Shapeways or with specific requests for dimensions.
by
GeoBling
Pendant shaped like Western Sahara including terrain data. Sized approximately 3.5cm by 3.5cm with a hook on the back to attach to necklaces.
The GeoBling series of jewelry started in 2011 by the Society for Printable Geography uses data from NASA's Shuttle Radar Topography mission to create artifacts resembling the countries of the world with realistic terrain information. Our complex algorithms created by computational geometry and geodata experts can create a custom piece of jewelry for almost any country in the world within seconds.
The thickness of this pendant is between 1mm (where the country is low) and 4mm (the highest peaks). A solid closed hook (no moving parts) on the rear allows attaching this pendant to a necklace. The necklace must fit through a hole sized 4mm by 3mm. Please contact us if you are interested in a different size, a country not currently available on Shapeways or with specific requests for dimensions.
The GeoBling series of jewelry started in 2011 by the Society for Printable Geography uses data from NASA's Shuttle Radar Topography mission to create artifacts resembling the countries of the world with realistic terrain information. Our complex algorithms created by computational geometry and geodata experts can create a custom piece of jewelry for almost any country in the world within seconds.
The thickness of this pendant is between 1mm (where the country is low) and 4mm (the highest peaks). A solid closed hook (no moving parts) on the rear allows attaching this pendant to a necklace. The necklace must fit through a hole sized 4mm by 3mm. Please contact us if you are interested in a different size, a country not currently available on Shapeways or with specific requests for dimensions.
by
GeoBling
Pendant shaped like Egypt including terrain data. Sized approximately 3.5cm by 3.5cm with a hook on the back to attach to necklaces.
The GeoBling series of jewelry started in 2011 by the Society for Printable Geography uses data from NASA's Shuttle Radar Topography mission to create artifacts resembling the countries of the world with realistic terrain information. Our complex algorithms created by computational geometry and geodata experts can create a custom piece of jewelry for almost any country in the world within seconds.
The thickness of this pendant is between 1mm (where the country is low) and 4mm (the highest peaks). A solid closed hook (no moving parts) on the rear allows attaching this pendant to a necklace. The necklace must fit through a hole sized 4mm by 3mm. Please contact us if you are interested in a different size, a country not currently available on Shapeways or with specific requests for dimensions.
The GeoBling series of jewelry started in 2011 by the Society for Printable Geography uses data from NASA's Shuttle Radar Topography mission to create artifacts resembling the countries of the world with realistic terrain information. Our complex algorithms created by computational geometry and geodata experts can create a custom piece of jewelry for almost any country in the world within seconds.
The thickness of this pendant is between 1mm (where the country is low) and 4mm (the highest peaks). A solid closed hook (no moving parts) on the rear allows attaching this pendant to a necklace. The necklace must fit through a hole sized 4mm by 3mm. Please contact us if you are interested in a different size, a country not currently available on Shapeways or with specific requests for dimensions.
by
GeoBling
Pendant shaped like Eritrea including terrain data. Sized approximately 3.5cm by 3.5cm with a hook on the back to attach to necklaces.
The GeoBling series of jewelry started in 2011 by the Society for Printable Geography uses data from NASA's Shuttle Radar Topography mission to create artifacts resembling the countries of the world with realistic terrain information. Our complex algorithms created by computational geometry and geodata experts can create a custom piece of jewelry for almost any country in the world within seconds.
The thickness of this pendant is between 1mm (where the country is low) and 4mm (the highest peaks). A solid closed hook (no moving parts) on the rear allows attaching this pendant to a necklace. The necklace must fit through a hole sized 4mm by 3mm. Please contact us if you are interested in a different size, a country not currently available on Shapeways or with specific requests for dimensions.
The GeoBling series of jewelry started in 2011 by the Society for Printable Geography uses data from NASA's Shuttle Radar Topography mission to create artifacts resembling the countries of the world with realistic terrain information. Our complex algorithms created by computational geometry and geodata experts can create a custom piece of jewelry for almost any country in the world within seconds.
The thickness of this pendant is between 1mm (where the country is low) and 4mm (the highest peaks). A solid closed hook (no moving parts) on the rear allows attaching this pendant to a necklace. The necklace must fit through a hole sized 4mm by 3mm. Please contact us if you are interested in a different size, a country not currently available on Shapeways or with specific requests for dimensions.
by
GeoBling
Pendant shaped like Estonia including terrain data. Sized approximately 3.5cm by 3.5cm with a hook on the back to attach to necklaces.
The GeoBling series of jewelry started in 2011 by the Society for Printable Geography uses data from NASA's Shuttle Radar Topography mission to create artifacts resembling the countries of the world with realistic terrain information. Our complex algorithms created by computational geometry and geodata experts can create a custom piece of jewelry for almost any country in the world within seconds.
The thickness of this pendant is between 1mm (where the country is low) and 4mm (the highest peaks). A solid closed hook (no moving parts) on the rear allows attaching this pendant to a necklace. The necklace must fit through a hole sized 4mm by 3mm. Please contact us if you are interested in a different size, a country not currently available on Shapeways or with specific requests for dimensions.
The GeoBling series of jewelry started in 2011 by the Society for Printable Geography uses data from NASA's Shuttle Radar Topography mission to create artifacts resembling the countries of the world with realistic terrain information. Our complex algorithms created by computational geometry and geodata experts can create a custom piece of jewelry for almost any country in the world within seconds.
The thickness of this pendant is between 1mm (where the country is low) and 4mm (the highest peaks). A solid closed hook (no moving parts) on the rear allows attaching this pendant to a necklace. The necklace must fit through a hole sized 4mm by 3mm. Please contact us if you are interested in a different size, a country not currently available on Shapeways or with specific requests for dimensions.
by
GeoBling
Pendant shaped like Finland including terrain data. Sized approximately 3.5cm by 3.5cm with a hook on the back to attach to necklaces.
The GeoBling series of jewelry started in 2011 by the Society for Printable Geography uses data from NASA's Shuttle Radar Topography mission to create artifacts resembling the countries of the world with realistic terrain information. Our complex algorithms created by computational geometry and geodata experts can create a custom piece of jewelry for almost any country in the world within seconds.
The thickness of this pendant is between 1mm (where the country is low) and 4mm (the highest peaks). A solid closed hook (no moving parts) on the rear allows attaching this pendant to a necklace. The necklace must fit through a hole sized 4mm by 3mm. Please contact us if you are interested in a different size, a country not currently available on Shapeways or with specific requests for dimensions.
The GeoBling series of jewelry started in 2011 by the Society for Printable Geography uses data from NASA's Shuttle Radar Topography mission to create artifacts resembling the countries of the world with realistic terrain information. Our complex algorithms created by computational geometry and geodata experts can create a custom piece of jewelry for almost any country in the world within seconds.
The thickness of this pendant is between 1mm (where the country is low) and 4mm (the highest peaks). A solid closed hook (no moving parts) on the rear allows attaching this pendant to a necklace. The necklace must fit through a hole sized 4mm by 3mm. Please contact us if you are interested in a different size, a country not currently available on Shapeways or with specific requests for dimensions.
by
GeoBling
Pendant shaped like Gabon including terrain data. Sized approximately 3.5cm by 3.5cm with a hook on the back to attach to necklaces.
The GeoBling series of jewelry started in 2011 by the Society for Printable Geography uses data from NASA's Shuttle Radar Topography mission to create artifacts resembling the countries of the world with realistic terrain information. Our complex algorithms created by computational geometry and geodata experts can create a custom piece of jewelry for almost any country in the world within seconds.
The thickness of this pendant is between 1mm (where the country is low) and 4mm (the highest peaks). A solid closed hook (no moving parts) on the rear allows attaching this pendant to a necklace. The necklace must fit through a hole sized 4mm by 3mm. Please contact us if you are interested in a different size, a country not currently available on Shapeways or with specific requests for dimensions.
The GeoBling series of jewelry started in 2011 by the Society for Printable Geography uses data from NASA's Shuttle Radar Topography mission to create artifacts resembling the countries of the world with realistic terrain information. Our complex algorithms created by computational geometry and geodata experts can create a custom piece of jewelry for almost any country in the world within seconds.
The thickness of this pendant is between 1mm (where the country is low) and 4mm (the highest peaks). A solid closed hook (no moving parts) on the rear allows attaching this pendant to a necklace. The necklace must fit through a hole sized 4mm by 3mm. Please contact us if you are interested in a different size, a country not currently available on Shapeways or with specific requests for dimensions.
by
GeoBling
Pendant shaped like United Kingdom including terrain data. Sized approximately 3.5cm by 3.5cm with a hook on the back to attach to necklaces.
The GeoBling series of jewelry started in 2011 by the Society for Printable Geography uses data from NASA's Shuttle Radar Topography mission to create artifacts resembling the countries of the world with realistic terrain information. Our complex algorithms created by computational geometry and geodata experts can create a custom piece of jewelry for almost any country in the world within seconds.
The thickness of this pendant is between 1mm (where the country is low) and 4mm (the highest peaks). A solid closed hook (no moving parts) on the rear allows attaching this pendant to a necklace. The necklace must fit through a hole sized 4mm by 3mm. Please contact us if you are interested in a different size, a country not currently available on Shapeways or with specific requests for dimensions.
The GeoBling series of jewelry started in 2011 by the Society for Printable Geography uses data from NASA's Shuttle Radar Topography mission to create artifacts resembling the countries of the world with realistic terrain information. Our complex algorithms created by computational geometry and geodata experts can create a custom piece of jewelry for almost any country in the world within seconds.
The thickness of this pendant is between 1mm (where the country is low) and 4mm (the highest peaks). A solid closed hook (no moving parts) on the rear allows attaching this pendant to a necklace. The necklace must fit through a hole sized 4mm by 3mm. Please contact us if you are interested in a different size, a country not currently available on Shapeways or with specific requests for dimensions.
by
GeoBling
Pendant shaped like Georgia including terrain data. Sized approximately 3.5cm by 3.5cm with a hook on the back to attach to necklaces.
The GeoBling series of jewelry started in 2011 by the Society for Printable Geography uses data from NASA's Shuttle Radar Topography mission to create artifacts resembling the countries of the world with realistic terrain information. Our complex algorithms created by computational geometry and geodata experts can create a custom piece of jewelry for almost any country in the world within seconds.
The thickness of this pendant is between 1mm (where the country is low) and 4mm (the highest peaks). A solid closed hook (no moving parts) on the rear allows attaching this pendant to a necklace. The necklace must fit through a hole sized 4mm by 3mm. Please contact us if you are interested in a different size, a country not currently available on Shapeways or with specific requests for dimensions.
The GeoBling series of jewelry started in 2011 by the Society for Printable Geography uses data from NASA's Shuttle Radar Topography mission to create artifacts resembling the countries of the world with realistic terrain information. Our complex algorithms created by computational geometry and geodata experts can create a custom piece of jewelry for almost any country in the world within seconds.
The thickness of this pendant is between 1mm (where the country is low) and 4mm (the highest peaks). A solid closed hook (no moving parts) on the rear allows attaching this pendant to a necklace. The necklace must fit through a hole sized 4mm by 3mm. Please contact us if you are interested in a different size, a country not currently available on Shapeways or with specific requests for dimensions.
by
GeoBling
Pendant shaped like Ghana including terrain data. Sized approximately 3.5cm by 3.5cm with a hook on the back to attach to necklaces.
The GeoBling series of jewelry started in 2011 by the Society for Printable Geography uses data from NASA's Shuttle Radar Topography mission to create artifacts resembling the countries of the world with realistic terrain information. Our complex algorithms created by computational geometry and geodata experts can create a custom piece of jewelry for almost any country in the world within seconds.
The thickness of this pendant is between 1mm (where the country is low) and 4mm (the highest peaks). A solid closed hook (no moving parts) on the rear allows attaching this pendant to a necklace. The necklace must fit through a hole sized 4mm by 3mm. Please contact us if you are interested in a different size, a country not currently available on Shapeways or with specific requests for dimensions.
The GeoBling series of jewelry started in 2011 by the Society for Printable Geography uses data from NASA's Shuttle Radar Topography mission to create artifacts resembling the countries of the world with realistic terrain information. Our complex algorithms created by computational geometry and geodata experts can create a custom piece of jewelry for almost any country in the world within seconds.
The thickness of this pendant is between 1mm (where the country is low) and 4mm (the highest peaks). A solid closed hook (no moving parts) on the rear allows attaching this pendant to a necklace. The necklace must fit through a hole sized 4mm by 3mm. Please contact us if you are interested in a different size, a country not currently available on Shapeways or with specific requests for dimensions.
Shop Details
Expertise
- 3D modeler
- Designer
- Product designer
- Artist
- Maker
Shop Sections
