We found 70 products by GHP
by
GHP
A tea light ring with flaps that remind me of tree ears (a kind of fungus that grows on tree trunks). Walls are 1.5mm thick. Suitable for use wit...
by
GHP
Twists into itself like a shell (but from both sides). Loop hole is 3mm in diameter. Wall thickness of ~1.73mm.
by
GHP
Critter with a Voronoi color pattern. (Hollow without a hole to allow removal of support material - but wall thicknesses are all at least 3mm.)
by
GHP
Contains a miniature copy of itself. This one reminds me somehow of a mother embracing a child, or pregnant, which seems especially appropriate fo...
by
GHP
Same as Fractal Heart Bauble 1, with another one of my Apophysis flame fractal patterns.
by
GHP
Customizable snowflake ball with text on one or two twisted bars.
The snowflake is a 3D version of a snowflake in glyphomosaic.png, a file that co...
by
GHP
Each interlaced band has a depth of 1mm, with a total band depth of ~2.2mm, and the band width across both is 4mm.
by
GHP
A slightly larger and heftier version of my previous netted ornament, which may be suitable for printing in Milky White Matte Glass. It will proba...
by
GHP
A wider (and showier) version of the stripes bracelet. Two strands twisted together. Inside diameter ~6.5cm.
by
GHP
A strip twisted around the finger twice. This would make a gorgeous wedding band in silver or gold-plated stainless steel. The strip is 1mm thick,...
by
GHP
Critter with a clouded sky pattern. (Hollow without a hole to allow removal of support material - but wall thicknesses are all at least 3mm.)
by
GHP
Walls thicknesses of about 1.5mm. My apologies to those who have ordered this in gold-plated stainless steel. I'm not sure how I came to have it av...
by
GHP
Critter with a flat base and a 12mm diameter hole in the bottom. Could double as pinky puppet, maybe?
Colours, especially black, will probably be...
by
GHP
Contains a smaller version of itself swinging freely by a loop. Outer loop has a 4mm opening and is 2mm thick. Inner loops are ~1.6mm thick with ...
by
GHP
A hollow ring, with skewed trumpet bells at each end. The band is ~2.6mm thick.
Warning: This ring may not be suitable for printing in stainless...
by
GHP
A livelier version of the Double Trumpet Ring (also hollow), with trumpets bent outwards. The band is ~2.6mm thick.
Warning: This ring may not b...
by
GHP
A tea light cover with a lively rippled pattern across the surface. Best printed in WSF, white detail, or transparent detail - other materials are...
by
GHP
A ruffled candle support for candles with a diameter of 22mm. Note that it is open all the way through (to reduce the cost), so a plate should be p...
by
GHP
A tea light cover with a pattern of raised latitudinal and longitudinal lines. Best printed in WSF, white detail, or transparent detail - other ma...
by
GHP
A lattice-work tea-light cover. Best printed in WSF, white detail, or transparent detail - other materials are unlikely to be translucent enough. ...
by
GHP
A candle ring formed of two rings (not actually separate) weaving through each other. For use with candles 22mm in diameter, it is best printed in...
by
GHP
A softer, more rounded, version of the interlaced candle ring. The two rings in this case are separate (just barely), but will probably fuse in pr...
by
GHP
A tea-light ring with a netted pattern. Suitable for use with LED tea lights in plastic materials, or possibly with real tea lights in stainless s...
by
GHP
A mobius strip with your own text and either 1 or 3 twists, sized with just over a 3cm inner diameter, perfect for a napkin ring. This would be ter...
by
GHP
Designed for use with a Quartex brand clock movement, 2 7/32"H x 2 7/32"W x 5/8"D, 5/16" shaft diameter, 1/2" dial thickness.
by
GHP
A small but charming cup, suitable for sake or other liquors (when printed in one of the ceramic materials). Contact me if you would like some vari...
Shop Details
Shop Sections
