Off The Rails

Designs by drrayner

Contact Designer

Essential items for your 7mm/ft 1:43.5 scale British railway.
For prototype information, instructions, photographs, hints and tips please go to our web-site

We found 30 products by drrayner

Per Page: 12 36 View: Grid | List

Check Rail Chairs 1.02mm Eight Pack

by drrayner

7mm/ft 1:43.5 chairs for BS95R bullhead rail. Based on the LNER NE region designs of 1926 they have a 1.02mm flangeway for use with ScaleSeven. Comprises sufficient chairs for 16 check-rails: 16*CCL, 64*CC and 16*CCR chairs (a.k.a. S1CL, S1C and S1CR respectively). The running rail is inclined at 1:20 but the check rail is held verTically; indicated by a "T" on the underside of each chair.

Note that these check-rail chairs are designed to be used alongside the injection-moulded ABS chairs and code 125 bullhead rail produced by C&L.

See the 1.02mm single pack version for additional images of this product. For prototype information, instructions, photographs, hints and tips please go to our web-site.

Available in different pack sizes:
Single pack comprising 2*CCL 8*CC 2*CCR sufficient for 2 check-rails.
Twin pack comprising 4*CCL 16*CC 4*CCR sufficient for 4 check-rails.
Four pack comprising 8*CCL 32*CC 8*CCR sufficient for 8 check-rails.
Eight pack comprising 16*CCL 64*CC 16*CCR sufficient for 16 check-rails.

Available with different flangeways:
1.02mm Flangeway for Scale7 33mm gauge
1.25mm Flangeway for 31.2mm gauge & Scale7 gauge widening
1.50mm Flangeway for 31.5mm gauge & Scale7 gauge widening
1.75mm Flangeway for O finescale 32mm gauge

(0)

From: $36.30

Check Rail Chairs 1.25mm

by drrayner

7mm/ft 1:43.5 chairs for BS95R bullhead rail. Based on the LNER NE region designs of 1926 they have a 1.25mm flangeway for use with 31.2mm gauge and S7 gauge-widening. Comprises sufficient chairs for 2 check-rails: 2*CCL, 8*CC and 2*CCR chairs (a.k.a. S1CL, S1C and S1CR respectively). The running rail is inclined at 1:20 but the check rail is held verTically; indicated by a "T" on the underside of each chair.

Note that these check-rail chairs are designed to be used alongside the injection-moulded ABS chairs and code 125 bullhead rail produced by C&L.

See the 1.02mm single pack version for additional images of this product. For prototype information, instructions, photographs, hints and tips please go to our web-site.

(0)

From: $12.51

Check Rail Chairs 1.25mm Twin Pack

by drrayner

7mm/ft 1:43.5 chairs for BS95R bullhead rail. Based on the LNER NE region designs of 1926 they have a 1.25mm flangeway for use with 31.2mm gauge and S7 gauge-widening. Comprises sufficient chairs for 4 check-rails: 4*CCL, 16*CC and 4*CCR chairs (a.k.a. S1CL, S1C and S1CR respectively). The running rail is inclined at 1:20 but the check rail is held verTically; indicated by a "T" on the underside of each chair.

Note that these check-rail chairs are designed to be used alongside the injection-moulded ABS chairs and code 125 bullhead rail produced by C&L.

See the 1.02mm single pack version for additional images of this product. For prototype information, instructions, photographs, hints and tips please go to our web-site.

(0)

From: $17.50

Check Rail Chairs 1.25mm Four Pack

by drrayner

7mm/ft 1:43.5 chairs for BS95R bullhead rail. Based on the LNER NE region designs of 1926 they have a 1.25mm flangeway for use with 31.2mm gauge and S7 gauge-widening. Comprises sufficient chairs for 8 check-rails: 8*CCL, 32*CC and 8*CCR chairs (a.k.a. S1CL, S1C and S1CR respectively). The running rail is inclined at 1:20 but the check rail is held verTically; indicated by a "T" on the underside of each chair.

Note that these check-rail chairs are designed to be used alongside the injection-moulded ABS chairs and code 125 bullhead rail produced by C&L.

See the 1.02mm single pack version for additional images of this product. For prototype information, instructions, photographs, hints and tips please go to our web-site.

(0)

From: $24.88

Check Rail Chairs 1.25mm Eight Pack

by drrayner

7mm/ft 1:43.5 chairs for BS95R bullhead rail. Based on the LNER NE region designs of 1926 they have a 1.25mm flangeway for use with 31.2mm gauge and S7 gauge-widening. Comprises sufficient chairs for 16 check-rails: 16*CCL, 64*CC and 16*CCR chairs (a.k.a. S1CL, S1C and S1CR respectively). The running rail is inclined at 1:20 but the check rail is held verTically; indicated by a "T" on the underside of each chair.

Note that these check-rail chairs are designed to be used alongside the injection-moulded ABS chairs and code 125 bullhead rail produced by C&L.

See the 1.02mm single pack version for additional images of this product. For prototype information, instructions, photographs, hints and tips please go to our web-site.

(0)

From: $36.92

Check Rail Chairs 1.50mm

by drrayner

7mm/ft 1:43.5 chairs for BS95R bullhead rail. Based on the LNER NE region designs of 1926 they have a 1.50mm flangeway for use with 31.5mm gauge and S7 gauge-widening. Comprises sufficient chairs for 2 check-rails: 2*CCL, 8*CC and 2*CCR chairs (a.k.a. S1CL, S1C and S1CR respectively). The running rail is inclined at 1:20 but the check rail is held verTically; indicated by a "T" on the underside of each chair.

Note that these check-rail chairs are designed to be used alongside the injection-moulded ABS chairs and code 125 bullhead rail produced by C&L.

See the 1.02mm single pack version for additional images of this product. For prototype information, instructions, photographs, hints and tips please go to our web-site.

(0)

From: $12.53

Check Rail Chairs 1.50mm Twin Pack

by drrayner

7mm/ft 1:43.5 chairs for BS95R bullhead rail. Based on the LNER NE region designs of 1926 they have a 1.50mm flangeway for use with 31.5mm gauge and S7 gauge-widening. Comprises sufficient chairs for 4 check-rails: 4*CCL, 16*CC and 4*CCR chairs (a.k.a. S1CL, S1C and S1CR respectively). The running rail is inclined at 1:20 but the check rail is held verTically; indicated by a "T" on the underside of each chair.

Note that these check-rail chairs are designed to be used alongside the injection-moulded ABS chairs and code 125 bullhead rail produced by C&L.

See the 1.02mm single pack version for additional images of this product. For prototype information, instructions, photographs, hints and tips please go to our web-site.

(0)

From: $17.55

Check Rail Chairs 1.50mm Four Pack

by drrayner

7mm/ft 1:43.5 chairs for BS95R bullhead rail. Based on the LNER NE region designs of 1926 they have a 1.50mm flangeway for use with 31.5mm gauge and S7 gauge-widening. Comprises sufficient chairs for 8 check-rails: 8*CCL, 32*CC and 8*CCR chairs (a.k.a. S1CL, S1C and S1CR respectively). The running rail is inclined at 1:20 but the check rail is held verTically; indicated by a "T" on the underside of each chair.

Note that these check-rail chairs are designed to be used alongside the injection-moulded ABS chairs and code 125 bullhead rail produced by C&L.

See the 1.02mm single pack version for additional images of this product. For prototype information, instructions, photographs, hints and tips please go to our web-site.

(1)

From: $24.97

Check Rail Chairs 1.50mm Eight Pack

by drrayner

7mm/ft 1:43.5 chairs for BS95R bullhead rail. Based on the LNER NE region designs of 1926 they have a 1.50mm flangeway for use with 31.5mm gauge and S7 gauge-widening. Comprises sufficient chairs for 16 check-rails: 16*CCL, 64*CC and 16*CCR chairs (a.k.a. S1CL, S1C and S1CR respectively). The running rail is inclined at 1:20 but the check rail is held verTically; indicated by a "T" on the underside of each chair.

Note that these check-rail chairs are designed to be used alongside the injection-moulded ABS chairs and code 125 bullhead rail produced by C&L.

See the 1.02mm single pack version for additional images of this product. For prototype information, instructions, photographs, hints and tips please go to our web-site.

(0)

From: $37.14

Check Rail Chairs 1.75mm

by drrayner

7mm/ft 1:43.5 chairs for BS95R bullhead rail. Based on the LNER NE region designs of 1926 they have a 1.75mm flangeway for use with O Finescale 32mm gauge. Comprises sufficient chairs for 2 check-rails: 2*CCL, 8*CC and 2*CCR chairs (a.k.a. S1CL, S1C and S1CR respectively). The running rail is inclined at 1:20 but the check rail is held verTically; indicated by a "T" on the underside of each chair.

Note that these check-rail chairs are designed to be used alongside the injection-moulded ABS chairs and code 125 bullhead rail produced by C&L.

See the 1.02mm single pack version for additional images of this product. For prototype information, instructions, photographs, hints and tips please go to our web-site.

(0)

From: $12.56

Check Rail Chairs 1.75mm Twin Pack

by drrayner

7mm/ft 1:43.5 chairs for BS95R bullhead rail. Based on the LNER NE region designs of 1926 they have a 1.75mm flangeway for use with O Finescale 32mm gauge. Comprises sufficient chairs for 4 check-rails: 4*CCL, 16*CC and 4*CCR chairs (a.k.a. S1CL, S1C and S1CR respectively). The running rail is inclined at 1:20 but the check rail is held verTically; indicated by a "T" on the underside of each chair.

Note that these check-rail chairs are designed to be used alongside the injection-moulded ABS chairs and code 125 bullhead rail produced by C&L.

See the 1.02mm single pack version for additional images of this product. For prototype information, instructions, photographs, hints and tips please go to our web-site.

(0)

From: $17.79

Check Rail Chairs 1.75mm Four Pack

by drrayner

7mm/ft 1:43.5 chairs for BS95R bullhead rail. Based on the LNER NE region designs of 1926 they have a 1.75mm flangeway for use with O Finescale 32mm gauge. Comprises sufficient chairs for 8 check-rails: 8*CCL, 32*CC and 8*CCR chairs (a.k.a. S1CL, S1C and S1CR respectively). The running rail is inclined at 1:20 but the check rail is held verTically; indicated by a "T" on the underside of each chair.

Note that these check-rail chairs are designed to be used alongside the injection-moulded ABS chairs and code 125 bullhead rail produced by C&L.

See the 1.02mm single pack version for additional images of this product. For prototype information, instructions, photographs, hints and tips please go to our web-site.

(0)

From: $25.48

Check Rail Chairs 1.75mm Eight Pack

by drrayner

7mm/ft 1:43.5 chairs for BS95R bullhead rail. Based on the LNER NE region designs of 1926 they have a 1.75mm flangeway for use with O Finescale 32mm gauge. Comprises sufficient chairs for 16 check-rails: 16*CCL, 64*CC and 16*CCR chairs (a.k.a. S1CL, S1C and S1CR respectively). The running rail is inclined at 1:20 but the check rail is held verTically; indicated by a "T" on the underside of each chair.

Note that these check-rail chairs are designed to be used alongside the injection-moulded ABS chairs and code 125 bullhead rail produced by C&L.

See the 1.02mm single pack version for additional images of this product. For prototype information, instructions, photographs, hints and tips please go to our web-site.