Oskar Puzzles

Designs by Oskar_van_Deventer
Oskar Puzzles offers mechanical puzzles and objects that can only exist thanks to 3D printing technologies. All designed by M. Oskar van Deventer.  Since 1978, he has been creating hundreds of mechanical puzzles, making him one of the world's most prolific designers. Several of his innovative designs are commercially available, including Oskar's Cube, a metal maze cube that is completely hollow inside.

Check out Oskar's YouTube channel (Youku for China) for his latest creations or join his official fan club.

Order 3D-printed do-it-yourself puzzle kits from Shapeways at this page (and check with Oskar about screws and stickers), or contact Oskar directly if you want to buy a fully dyed, assembled and stickered puzzle.

Oskar_van_Deventer is selling 249 products in NOT YET PROTOTYPED section

by Oskar_van_Deventer
Illegal Cube is a puzzle that should not be allowed to exist. This 'cube' has two corners and three edges too many, and two pentagonal faces. Still...
 
(6)  
  •  
From: $156.66
 
by Oskar_van_Deventer
Redi Cube is a twisty puzzle, similar to Rubik's Cube. Here, the pieces turn around the cube corners. For the experts: the mechanism has some simi...
 
(16)  
  •  
From: $314.93
 
by Oskar_van_Deventer
Now mass-produced by Meffert! Fadi Cube is a twisty puzzle like Rubik's Cube. It is an attempt to use other than conventional slices to make a twi...
 
(18)  
  •  
From: $326.59
 
by Oskar_van_Deventer
DinoBram is yet another jumbling twisty puzzle concept by Bram Cohen. He calls this 24-turning-axes puzzle a "corner-turning rhombicuboctahedr...
 
(1)  
  •  
From: $184.71
 
by Oskar_van_Deventer
Nested Cube has two 2x2x2's, one inside the other. However, the two 2x2x2 can not move independently, as two outer corners are connected to two inn...
 
(5)  
  •  
From: $112.35
 
by Oskar_van_Deventer
Astroid Attack is a twisty puzzle like Rubik's Cube. It is based on Bram Cohen's "jumble" concept, where the geometry is no longer isomet...
 
(12)  
  •  
From: $263.19
 
by Oskar_van_Deventer
Take Five is an innovative five-band ring design by Bram Cohen. Size 8, 18.54 mm inner diameter.Watch the YouTube clip video Read at the Shapeways ...
 
(12)  
  •  
From: $13.53
 
by Oskar_van_Deventer
Size 8, 18.54 mm inner diameter. This puzzle ring is a design by Bram Cohen. Bram writes: "It has basically a a single trick, but that trick i...
 
(11)  
  •  
From: $13.40
 
by Oskar_van_Deventer
Size 8, 18.54 mm inner diameter. This six-part puzzle ring is a design by Bram Cohen. Bram writes: "This six-banded design is a straightforwar...
 
(17)  
  •  
From: $15.62
 
by Oskar_van_Deventer
Big Boulder is a blatant case of twisty puzzle extremism. 1 core, 60 centers, 140 corners and a whopping 150 edges. That is a lot of pieces. And to...
 
(14)  
  •  
From: $311.94
 
by Oskar_van_Deventer
Swap Cube are five 2x2x2 Rubik's Cubes in a frame. Each of the cubes can be scrambled individually. But the cubes can also swap pieces by turning t...
 
(5)  
  •  
From: $215.43
 
by Oskar_van_Deventer
JumblePrism is an idea by Bram Cohen. It is a twisty puzzle like Rubik's Cube, but using on a triangular prism. Because of this odd geometry, the p...
 
(3)  
  •  
From: $323.49
 
by Oskar_van_Deventer
From one side, Floppy 3x3x3 looks like a Rubik's Cube. But it isn't. When you turn the faces of this puzzle, it gets scrambled in quite unexpected ...
 
(4)  
  •  
From: $129.71
 
by Oskar_van_Deventer
Floppy 2x2x3 is a tribute to Katsuhiko Okamoto's brilliant and award-winning Floppy Cube. Floppy 2x2x3 works like a normal 3x3x3 Rubik's Cube, but ...
 
(5)  
  •  
From: $99.16
 
by Oskar_van_Deventer
Floppy 2x2x2 is a tribute to Katsuhiko Okamoto's brilliant and award-winning Floppy Cube. Floppy 2x2x2 works like a normal 3x3x3 Rubik's Cube, but ...
 
(8)  
  •  
From: $74.87
 
by Oskar_van_Deventer
Half Turn Cube is a Rubik's Cube that only allows half turns. This makes it a different puzzle that is easier to solve. It was contrived by Takafum...
 
(9)  
  •  
From: $214.12
 
by Oskar_van_Deventer
Oh Cube is a twisty puzzle, similar to Rubik's Cube. However, it turns in some strange way, turning around corners and pieces sliding under and ove...
 
(3)  
  •  
From: $173.12
 
by Oskar_van_Deventer
Split Hex is a twisty puzzle with forty squares and eight triangles. The puzzle has two hexagonal cross-sections and one four-fold symmetry. It is ...
 
(7)  
  •  
From: $61.54
 
by Oskar_van_Deventer
Framed Cube is a hollow 4x4x4 Rubik's Cube with a visible 2x2x2 Rubik's Cube inside. So you do not only have to solve the outer surface, but the in...
 
(4)  
  •  
From: $237.42
 
by Oskar_van_Deventer
Gerardo's Cube is a Rubik's Cube without edges. The suggestor and name giver of this puzzle is an active contributor to the Twisty Puzzles Forum. H...
 
(11)  
  •  
From: $79.22
 
by Oskar_van_Deventer
Big Chop is a twisty puzzle like Rubik's Cube. It was named by Bram Cohen. The object of the puzzle is tor scramble the 120 pieces and try to turn ...
 
(12)  
  •  
From: $233.33
 
by Oskar_van_Deventer
PantaCube was inspired by the Cubedron puzzle, which was designed by Pantazis Houlis. As a tribute to Pantazis' work, I call the puzzle PantaCube....
 
(4)  
  •  
From: $67.44
 
by Oskar_van_Deventer
Twisty Tree is a fractal twisty puzzle. Any leaf can change place with any other leaf after some turns. Watch the YouTube video Read at the Shapew...
 
(14)  
  •  
From: $370.42
 
by Oskar_van_Deventer
Fractal Cube is a twisty puzzle, related to Rubik's Cube. When solved, it is completely flat. While scrambling and solving, it swivels in all direc...
 
(9)  
  •  
From: $299.05
 
by Oskar_van_Deventer
AntiCube was suggested by Jason Smith. It has the geometry of a square antiprism. Some fudging was needed to make everything fit. This twisty puzzl...
 
(2)  
  •  
From: $168.53
 
by Oskar_van_Deventer
Oskar had his head 3D scanned. The eight pieces should be glued around a 2x2x2 Rubik's Cube with 24 mm edges (12 cm cubies). You may buy the inner...
 
(4)  
  •  
From: $73.90
 
by Oskar_van_Deventer
Polo Cube is an idea by Alex Polonsky. This innovative twisty puzzle combines a sliding 2x2x2 with a twisting 2x2x2. Watch the YouTube video Read...
 
(1)  
  •  
From: $225.61
 
by Oskar_van_Deventer
Crazy Six is a twisty puzzle, related to Rubik's Cube. It looks like a 6x6x6, but with some circular faces. When turning, the faces seem strangely ...
 
(7)  
  •  
From: $285.02
 
by Oskar_van_Deventer
Gift Pyramid is a pyramid-shaped twisty puzzle that can be taken apart when solved. It has a little spherical cavity that can contain a small objec...
 
(3)  
  •  
From: $355.99
 
by Oskar_van_Deventer
Geary Cube is a Rubik's Cube with gears inside. This way, opposite sides always turn in opposite direction. As a result, the cube always displays n...
 
(11)  
  •  
From: $248.30
 
by Oskar_van_Deventer
This puzzle has nine cubes moving through a frame. The object is to get all colors right.The design is inspired by an idea from Bram Cohen, hence t...
 
(1)  
  •  
From: $137.34
 
by Oskar_van_Deventer
CAUTION, THIS IS NOT A COMPLETE PUZZLE. Frank Tiex and Carl Hoff suggested that I build plugs to enable shape-modding of Minimal Twist. These are t...
 
(0)  
  •  
From: $71.03
 
by Oskar_van_Deventer
This puzzle has seven cubes moving through a frame. The object is to get all colors right. The design is an idea by Bram Cohen, hence the name of t...
 
(2)  
  •  
From: $146.05
 
by Oskar_van_Deventer
Crazy Comet is a twisty puzzle related to Rubik's Cube. This one is based on a rhombododecahedron. Additional info for twisty-puzzle experts: Crazy...
 
(5)  
  •  
From: $287.77
 
by Oskar_van_Deventer
Dino Cube is a classic cube design from the 1980's, designed by ... Watch the YouTube video. Please contact Oskar directly if you are interested ...
 
(0)  
  •  
From: $35.40
 
by Oskar_van_Deventer
A 1x2x9 version now mass-produced by Mefferts! Unlucky Twist is a 1x2x13 twisty puzzle, related to the Rubik's Cube. It is a tribute to Ola Jansso...
 
(15)  
  •  
From: $131.48
 
Shop Details
Oskar Puzzles offers mechanical puzzles and objects that can only exist thanks to 3D printing technologies. All designed by M.Oskar van Deventer.

Expertise

  • 3D modeler
  • Designer