• Pendant or Key-chain (lanyard not included)
• From a "Study & Testing of Shapeways Materials" series (started privately in May 2010 ) – concentrating on type and small but essential detail on Stainless Steel and Gold Plated Stainless Steel – in conjunction with my NEW TRAM project http://www.shapeways.com/model/163220/the_new__2010__roosevelt_island_tram.html?gid=sg38482
• Note: All 4 models in this series are similar; the only difference is in their size; they all print beautifully in Stainless Steel and Gold Plated Stainless Steel (see description pictures)

• Hear the song «CROSSING THE EAST RIVER ON THE ROOSEVELT ISLAND TRAM»:
http://cascador.com/CrossingTheEastRiverOnTheRooseveltIslandTram/CrossingTheEastRiverOnTheRooseveltIslandTramCopyright2010JonathaKalbAndOvidiuOpresco.mp3
Original song, written, composed and sung to mark the Inauguration of the new Roosevelt Island Tram
Copyright ©2010 Jonathan Kalb & Ovidiu Opresco

See my other Roosevelt Island Tram designs:
• New Tram Earrings/Pendants: http://www.shapeways.com/model/163220/the_new__2010__roosevelt_island_tram.html?gid=sg38482
• Ring: http://www.shapeways.com/model/181463/the_new__2010__roosevelt_island_tram_ring.html?gid=sg38482
• Old Tram Earrings/Pendants: http://www.shapeways.com/model/139021/the_roosevelt_island_tram__earrings_.html?gid=mg
• Old Tram Keyring/Pendant: http://www.shapeways.com/model/121721/the_old_roosevelt_island_tram__3__30__.html?gid=sg38482

See all my designs here:
http://www.shapeways.com/shops/opresco

• Pendant and/or Keyring • Lanyard not included
• Kindly note that this here ball is a guaranteed 100% genuine Truncated Icosahedron soccer ball that was 100% hand engineered from scratch (more about it here )
• NOTE: If you decide to buy this, you may also be interested in getting The Sport Sculpture Trophy Cup
********************
Soccer Ball Ring
Soccer Ball Earrings
Soccer Ball with Roosevelt Island Tram inside
Soccer Ball Pendant
32-BIT SOCCER BALL DIE PENDANT
Soccer Ball with American Football Inside #2
Soccer Ball Pendant /Keyring
Dutch Shoe Inside Soccer Ball #1
Soccer Ball with Dutch Soccer Shoe Inside
Peace Ball

FATHER'S DAY SPECIAL: CUSTOM PLANETARY KEYRING WITH CUSTOM CAPTIVE DESIGNER'S LOGOTYPE TAG AND 6 CAPTIVE RINGS • Six captive rings can move in any direction only around three axes :) • The design was tested in White Strong and Flexible and it works/feels beautifully; I'm pretty sure the wizards at Shapeways have already found a way to support the rings and prevent fusing when ordered in Stainless Steel or Gold Plated Stainless Steel • Click on "Create Your Own" button to specify your initials; The designer will replace his mark/logotype on the captive tag with a custom designed 3d mark/logotype for you.

Free ball inside!
See my New Spring Loaded Dice:
Spring-loaded 30-sided die.
Spring-loaded Icodie.
Spring-loaded die.

• A trophy cup for the champion soccer mom, dad, daughter or son in your life! :-) • When not in use, The Soccer Ball Pendant / Keyring rests on its own presentation/display stand that doubles as a trophy • Use the "Create Your Own" button to specify your initial (one letter only) and a number (1-11) to be engraved on the trophy.

• Pendantized soccer ball die. Please see the description renderings to see what I mean by "pendatized"; because, for lack of a better word, I believe this newly coined word (remember, you've heard it here first :-) explains precisely what I actually did to my freshly minted, rotund, «32-Bit Soccer Ball Die»; you can see on this page: http://www.shapeways.com/model/129353/32_bit_soccer_ball_die.html

"Loaded" with a free bouncing ball inside :)
Could be worn as a pendant (lanyard not included).

See my New Spring Loaded Dice:
Spring-loaded 30-sided die.
Spring-loaded Icodie.
Spring-loaded die.

File Status:
SteelCageDice_AA.STL - Originally uploaded on 27 Apr 2010
Copyright © 2010 Ovidiu Opresco

I am coming up with several variations on a spring loaded chopsticks design; beta testing at your own risk :) has anyone tried Milky White Glass, yet? :)

Lanyard not included

• This model is the #3 variation of the EEB #3 (3-d Logotype) design that could be seen on this page:
http://www.shapeways.com/model/130353/2e1b__threedee_logotype__1_.html

• This model is the #2 variation of the EEB #3 (3-d Logotype) design that could be seen on this page:
http://www.shapeways.com/model/130353/2e1b__threedee_logotype__1_.html

Holder inside diameter = 4.5 cm
(for cupped candles)

File Status:
candleholder.STL - Originally uploaded on 13 Apr 2010
Copyright ©2010 Ovidiu Opresco

File Status
XSteelCageGrid25mm.STL - Originally uploaded on 28 Apr 2010 Copyright ©2010 Ovidiu Opresco

Could be worn as a pendant (lanyard not included)

• Sorry, the full official title of this design didn't quite fit on top; it actually should read like so: QUASI-DUALITY PENDANT WITH BOAT HANGED BY ITS SMOKE INSIDE :-)

See my New Spring Loaded Dice:
Spring-loaded 30-sided die.
Spring-loaded Icodie.
Spring-loaded die.

• I made this exclusively, from scratch, for a very smart guy who, for posterity, quietly collects all my die designs; I wish he'll make a good fortune out of them, long before I dice :-)
• Has "OPRESCO FECIT FOR COOK - A.D. 2010" inscription on one of the inside faces. I hope he's rich enough so he could afford ordering 2 sets and UPS me one, with his autograph on it :-) And Kevin, if you do, please mention on your order (in bold lettering) that the captive RHOMBIDIE® should be free to move around at will, inside! :-)
• Note: In the 1980's, I've been exploring the duality of Polyhedra while making a series of polyhedral sculptures; I've developed, then, an unique method/theory/theorem on building Platonic and Archimedean Polyhedra out of scrap metal offset plates (to this day, my favorite material for building all kind of models by hand) and machine screws by strictly using only conventional (at the time) drafting tools: (T-square, Triangles, Compass, Protractor, Trigonometer) and an E-Xacto knife. All geometric art seen in my shop is the spin-off of that hands-on research and work; for more info see http://cascador.com/RegularPolyhedra/PolyhedraH
• Keep an eye for the soon to be released 30 faceted RHOMBICTRIACONTAHEDIE® with Roman numerals on it :-)

• Pendant or Key-chain (lanyard and keys not included :-)
• Pendant or Key-chain (lanyard and keys not included :-)
• From a "Study & Testing of Shapeways Materials" series (started privately in May 2010 ) – concentrating on type and small but essential detail on Stainless Steel and Gold Plated Stainless Steel – in conjunction with my NEW TRAM project http://www.shapeways.com/model/133412/new_roosevelt_island_tram.html
• Note: All 4 models in this series are similar; the only difference is in their size; they all print beautifully in Stainless Steel and Gold Plated Stainless Steel (see description pictures)

Same description as in THE MOTHER SHIP #5A.

• 20 faceted dice (based on the icosahedron) • Could be worn as a pendant • Lanyard not included.•
Uses the same original construction algorithm as the popular DODCLOCK DIE and the 32-BIT SOCCER BALL DIE
See my New Spring Loaded Dice:
Spring-loaded 30-sided die.
Spring-loaded Icodie.
Spring-loaded die.

• Inscribed with see-through lettering: "Lilick" on one side and "Crin" (which means "Lily" in Romanian) on the other. • Lanyard not included :-)
• Note: I made this for an old friend of mine; no designer's mark-up fee is added to its price.

• I am making this as my birthday gift and/or tribute to an old (since 1971!!!) great acquaintance of mine; If your initials happen to be 2E1B and you like the design, please do feel free to order one for yourself; my old acquaintance would not mind; he's a much better designer than I; and, believe me, he could very easily design a much better one for himself in just a jiffy!; besides, IMHO, it would be a great honor to all of us to get Him involved with Shapeways • Please note that there are 3 variations on this design; with the only difference being the edge treatment: • #1 chamfered; • #2 filleted; http://www.shapeways.com/model/130355/eeb__2__3_d_logotype_.html • #3 filleted with the largest radius possible http://www.shapeways.com/model/130356/eeb__3__3_d_logotype_.html • HAPPY ANNIVERSARY & MANNY HAPPY RETURNS 2E1B ! Ovoid.