model being updated, please check back later!

This mount connects your Ay-Up Light and Garmin Edge 800 computer to your handlebar. The Ay-Up light is attached underneath, using the standard elastic band that comes with the light. The clamp is for a 31.8mm Road handlebar.

The mount features two strong arms for minimum vibration / movement.

For a sweet finish, get it in a polished material like WSF polished or one of the bright colours. (Plain white will get a bit dirty, plain black is great but the texture is a bit rough)

Two M4 x 16mm Socket Cap bolts and nylock nuts are required, not included, though easily found on the internet, at the hardware shop or the bike shop. Please note, the holes are sized exactly to M4, so if you're having trouble getting the bolt through, as I was, you're probably using an M5!

>>feel free to contact me if you have any issues, can suggest any improvements or have any other fittings you would like to see produced.
www.nickflutter.com
www.biik.com.au

This mount allows you to connect basically anything to the top of the steerer tube of your bike. Use 3M double-sided tape, 3M 'Dual Lock' or rubber 0-rings to connect your phone, GPS or whatever else to the mount. The wear compensation screw allows you to adjust the tightness of the locking mechanism, as prototyped on my other mounts.

When you get this product, there will probably be some excess powder in the hinges and around the loose internal ring. You need to get this out either by washing the parts or working them free with your fingers. The hinge will be stiff at first, but once the powder comes out it should move very freely.

When installing the threaded lock ring for the first time, make sure you align the clips on the internal ring with the recesses on the lock ring. The internal ring should click on and stay there

PM me if you have any issues with the model!

Cable stop for internal cabling on a custom bike frame. Designed for the casing to run continuously through the frame Requires 25mm x 7.5mm hole in frame

model being updated, please check back later!

This mount connects your Ay-Up Light and Garmin Edge 200 / 500 computer to your handlebar. The Ay-Up light is attached underneath, using the standard elastic band that comes with the light. The clamp is for a 31.8mm Road handlebar.

The mount features two strong arms for minimum vibration / movement.

For a sweet finish, get it in a polished material like WSF polished or one of the bright colours. (Plain white will get a bit dirty, plain black is great)

Two M4 x 16mm Socket Cap bolts and nylock nuts are required, not included, though easily found on the internet, at the hardware shop or the bike shop. Please note, the holes are sized exactly to M4, so if you're having trouble getting the bolt through, as I was, you're probably using an M5!

>>feel free to contact me if you have any issues, can suggest any improvements or have any other fittings you would like to see produced.
www.nickflutter.com
www.biik.com.au

biikparts iPhone 4 Case v2.01

This is a rugged, solid case to protect your iPhone. It features a 3D printed hinge to lock your iPhone in more securely and positively than a flexible case, as successfully trialled on the biikparts iPhone bike mount.

Tested - this design functions perfectly, and provides a tough protective skin for iPhone 4 GSM model. The hinge can be difficult to move at first, as the excess powder can clog the moving parts. Either work the powder free or wash it out in water before use.

The case has been designed to apple standard dimensions, click here for more information.

Please note, an iPhone 4S case is also available at my store.

www.nickflutter.com www.biik.com.au