Hand-held electrostatic blaster gun converts into a 56mm robot action figure with 9 points of articulation. Open hands allow him to hold any accessory with a 3mm peg.

Gun mode comes with a choice of three handles, either of which can be glued in to the mounting point on the figure's back. 
Option 1 is a standard 5mm post, which is compatible with any figure bearing a 5mm peg hole.
Option 2 is a modified version of the post, which can still be used by figures with 5mm peg holes, but also has a built-in clip which allows it to clip onto any 3mm diameter rail.
Option 3 is a two-stage post, which like Option 1, can fit into any 5mm peg hole, but also has a narrowed end allowing it to be used by figures with 4mm diameter peg holes.

Supplied as a 16-piece kit. Finishing (painting/dyeing) required, alternatively can be purchased in one of the available pre-dyed colours.   

Fearsome-looking machine gun converts into a 56mm robot action figure with 10 points of articulation.
Gun mode's handle is a 5mm diameter peg, making it compatible with many larger robot action figures.

Supplied as a 14-piece kit. Finishing (painting/dyeing) required, alternatively can be purchased in one of the available pre-dyed colours.

Assembly instructions available at:
http://www.shapeways.com/forum/index.php?t=msg&goto=21214&#msg_21214 

If you purchase Salvo, in any material, I'd love to see your results in the "It Arrived" forum!

Detailed sniper assault rifle with flip-down bipod converts into a 56mm robot action figure with 9 points of articulation.

Gun mode comes with a choice of three handles, any one of which can be fit onto the figure during assembly (and since they are attached via a simple clip-in hinge, you can keep the others handy and swap them later if you choose). Option 1 is a standard 5mm post, which is compatible with any figure bearing a 5mm peg hole. Options 2 and 3 are modified versions of the post, which can still be used by figures with 5mm peg holes, but also have built-in clips which allow them to clip onto any 3mm diameter rail. One version has the opening of the clip positioned parallel to the length of the gun, the other perpendicular.
 
Supplied as a 18-piece kit. Finishing (painting/dyeing) required, alternatively can be purchased in one of the available pre-dyed colours . 

Assembly and conversion instructions available HERE.

Powerful hand-held acid blaster rifle converts into a 56mm robot action figure with 9 points of articulation.

Gun mode comes with a choice of three handles, any one of which can be fit onto the figure during assembly (and since they are attached via a simple clip-in hinge, you can keep the others handy and swap them later if you choose).
Option 1 is a standard 5mm post, which is compatible with any figure bearing a 5mm peg hole.
Options 2 and 3 are modified versions of the post, which can still be used by figures with 5mm peg holes, but also have built-in clips which allow them to clip onto any 3mm diameter rail. One version has the opening of the clip positioned parallel to the length of the gun, the other perpendicular.

Supplied as a 17-piece kit. Finishing (painting/dyeing) required, alternatively can be purchased in one of the available pre-dyed colours.

Assembly instructions coming soon...

Hand-held electron rifle converts into a 56mm robot action figure with 9 points of articulation.
Gun mode comes with a choice of three handles, any of which can be glued in to the mounting point on the figure's back.
Option 1 is a standard 5mm post, which is compatible with any figure bearing a 5mm peg hole.
Option 2 is a modified version of the post, which can still be used by figures with 5mm peg holes, but also has a built-in clip which allows it to clip onto any 3mm diameter rail.
Option 3 is a two-stage post, which like Option 1, can fit into any 5mm peg hole, but also has a narrowed end allowing it to be used by figures with 4mm diameter peg holes.
Also has a series of tabs mounted on his back, which allow him to be used with certain figures as a vehicle-mounted weapon. Note that these do not in any way hamper his functionality with other figures.

Newly redesigned hands are able to hold or clip onto any 3mm diameter rod.
A new hinge design means  this figure is now available to be printed in the Detail materials as well as WSF. However, WSF Polished is recommended for the best combination of durability and smoothness.

Supplied as a 14-piece kit. Finishing (painting/dyeing) required, alternatively can be purchased in one of the available pre-dyed colours.

Assembly instructions coming soon...

7-part model kit to build Hound robot mode figure with swivel-jointed head and arms. Stands 52mm tall.
Requires painting and finishing.

Vehicle mode kit available here:

6-part model kit to build Ratchet robot mode figure with swivel-jointed head and arms. Stands 55mm tall.

Vehicle mode model available here: http://www.shapeways.com/model/182637/ratchide_vehicle_mode.html?gid=ug43978

6-part model kit to build Ironhide robot mode figure with swivel-jointed head and arms. Stands 55mm tall.

Vehicle mode model available here: http://www.shapeways.com/model/182637/ratchide_vehicle_mode.html?gid=ug43978