Hand-held electrostatic blaster gun converts into a 56mm robot action figure with 9 points of articulation. Open hands allow him to hold any accessory with a 3mm peg.

Gun mode comes with a choice of three handles, either of which can be glued in to the mounting point on the figure's back. 
Option 1 is a standard 5mm post, which is compatible with any figure bearing a 5mm peg hole.
Option 2 is a modified version of the post, which can still be used by figures with 5mm peg holes, but also has a built-in clip which allows it to clip onto any 3mm diameter rail.
Option 3 is a two-stage post, which like Option 1, can fit into any 5mm peg hole, but also has a narrowed end allowing it to be used by figures with 4mm diameter peg holes.

Supplied as a 16-piece kit. Finishing (painting/dyeing) required, alternatively can be purchased in one of the available pre-dyed colours.   

Fearsome-looking machine gun converts into a 56mm robot action figure with 10 points of articulation.
Gun mode's handle is a 5mm diameter peg, making it compatible with many larger robot action figures.

Supplied as a 14-piece kit. Finishing (painting/dyeing) required, alternatively can be purchased in one of the available pre-dyed colours.

Assembly instructions available at:
http://www.shapeways.com/forum/index.php?t=msg&goto=21214&#msg_21214 

If you purchase Salvo, in any material, I'd love to see your results in the "It Arrived" forum!

Detailed sniper assault rifle with flip-down bipod converts into a 56mm robot action figure with 9 points of articulation.

Gun mode comes with a choice of three handles, any one of which can be fit onto the figure during assembly (and since they are attached via a simple clip-in hinge, you can keep the others handy and swap them later if you choose). Option 1 is a standard 5mm post, which is compatible with any figure bearing a 5mm peg hole. Options 2 and 3 are modified versions of the post, which can still be used by figures with 5mm peg holes, but also have built-in clips which allow them to clip onto any 3mm diameter rail. One version has the opening of the clip positioned parallel to the length of the gun, the other perpendicular.
 
Supplied as a 18-piece kit. Finishing (painting/dyeing) required, alternatively can be purchased in one of the available pre-dyed colours . 

Assembly and conversion instructions available HERE.

Powerful hand-held acid blaster rifle converts into a 56mm robot action figure with 9 points of articulation.

Gun mode comes with a choice of three handles, any one of which can be fit onto the figure during assembly (and since they are attached via a simple clip-in hinge, you can keep the others handy and swap them later if you choose).
Option 1 is a standard 5mm post, which is compatible with any figure bearing a 5mm peg hole.
Options 2 and 3 are modified versions of the post, which can still be used by figures with 5mm peg holes, but also have built-in clips which allow them to clip onto any 3mm diameter rail. One version has the opening of the clip positioned parallel to the length of the gun, the other perpendicular.

Supplied as a 17-piece kit. Finishing (painting/dyeing) required, alternatively can be purchased in one of the available pre-dyed colours.

Assembly instructions coming soon...

Hand-held electron rifle converts into a 56mm robot action figure with 9 points of articulation.
Gun mode comes with a choice of three handles, any of which can be glued in to the mounting point on the figure's back.
Option 1 is a standard 5mm post, which is compatible with any figure bearing a 5mm peg hole.
Option 2 is a modified version of the post, which can still be used by figures with 5mm peg holes, but also has a built-in clip which allows it to clip onto any 3mm diameter rail.
Option 3 is a two-stage post, which like Option 1, can fit into any 5mm peg hole, but also has a narrowed end allowing it to be used by figures with 4mm diameter peg holes.
Also has a series of tabs mounted on his back, which allow him to be used with certain figures as a vehicle-mounted weapon. Note that these do not in any way hamper his functionality with other figures.

Newly redesigned hands are able to hold or clip onto any 3mm diameter rod.
A new hinge design means  this figure is now available to be printed in the Detail materials as well as WSF. However, WSF Polished is recommended for the best combination of durability and smoothness.

Supplied as a 14-piece kit. Finishing (painting/dyeing) required, alternatively can be purchased in one of the available pre-dyed colours.

Assembly instructions coming soon...

Designed for customisers, this set of four sockets can be built into small scale figures to turn them into limbs for your combiner 'bots. They clip securely onto the larger figures' male plugs with a satisfying 'click', and won't come off until you want them to.
Also included is a bonus flap for the jet figure, which allows you to plug minibots onto his chest while in his combined form.

Contents: Four combiner sockets, one replacement flap for jet figure. Jet figure not included - sorry.

Got a 5mm hole and want a post to fit in it? Well, here's your fix! Included are 9 double-ended pegs; each peg is 6mm long with a 5mm diameter, and a 2.2mm diameter hollow down the centre.

6x 5mm diameter round pegs for customising. Each peg is 6mm long, with a 5mm diameter, and a 2.2mm hole running down the middle. Each mounted on a lightly decorated 6mm square base, so they can be glued to any flat surface.

Custom head for robot toy. Dimensions approximately 12mm in all directions, neck socket designed to accomodate a 5mm ball joint.
Finishing (painting, dyeing etc.) required.

Custom head for robot toy. Dimensions approximately 12mm in all directions, neck socket designed to accommodate a 4mm ball joint.

Finishing (painting/dyeing) required.

7-part model kit to build Hound robot mode figure with swivel-jointed head and arms. Stands 52mm tall.
Requires painting and finishing.

Vehicle mode kit available here:

6-part kit to build Hound jeep mode model. Kit consists of jeep body, two pairs of rolling wheels, two seats, and turret gun.

Completed model 40mm long, 22mm wide and 17.5mm high (to top of windshield).
Painting and finishing required.

Robot mode kit available here.

6-part model kit to build Ironhide robot mode figure with swivel-jointed head and arms. Stands 55mm tall.

Vehicle mode model available here: http://www.shapeways.com/model/182637/ratchide_vehicle_mode.html?gid=ug43978

12-piece kit builds repair bay/battle station accessory for Ratchet/Ironhide figure.

Model kit to build Scamper robot mode figure. Comes in seven parts; torso, legs, arms, and two heads to choose from (cartoon-style and toy-style). Stands 51mm tall.

Scamper's vehicle mode is also available:
http://www.shapeways.com/model/156748/scamper_mini_car.html?gid=sg43978

Model kit to build Scamper vehicle mode. Includes car body and three pairs of rolling wheels. Features a port in the underside allowing the car to mounted on 5mm pegs.

Scamper's robot mode is also available:
http://www.shapeways.com/model/156746/scamper_minifigure.html?gid=sg43978

This pendant shows the trigram Ch'ien, which represents the creative element of Heaven or Sky in the I Ching.
Can be worn as a trigram on its own, or combine it with a lower trigram (sold separately) to complete a six-line hexagram!

Trigram itself is 20mm wide by 9.5mm high; combined hexagram is 20x20mm.

This pendant shows the trigram K'un, which represents the receptive element of Earth in the I Ching.
Combine it with an upper trigram (sold separately) to complete a six-line hexagram!

Combined hexagram is 20x20mm.

This pendant shows the trigram K'un, which represents the receptive element of Earth in the I Ching.
Can be worn as a trigram on its own, or combine it with a lower trigram (sold separately) to complete a six-line hexagram!

Trigram itself is 20mm wide by 9.5mm high; combined hexagram is 20x20mm.

This pendant shows the trigram Chen, which represents the active element of Thunder in the I Ching.
Can be worn as a trigram on its own, or combine it with a lower trigram (sold separately) to complete a six-line hexagram!

Trigram itself is 20mm wide by 9.5mm high; combined hexagram is 20x20mm.

This pendant shows the trigram Ken, which represents the unmoving element of the Mountain in the I Ching.
Can be worn as a trigram on its own, or combine it with a lower trigram (sold separately) to complete a six-line hexagram!

Trigram itself is 20mm wide by 9.5mm high; combined hexagram is 20x20mm.

This pendant shows the trigram Sun, which represents the gentle element of the Wind in the I Ching.
Can be worn as a trigram on its own, or combine it with a lower trigram (sold separately) to complete a six-line hexagram!

Trigram itself is 20mm wide by 9.5mm high; combined hexagram is 20x20mm.

This pendant shows the trigram Li, which represents the clarifying element of Fire in the I Ching.
Can be worn as a trigram on its own, or combine it with a lower trigram (sold separately) to complete a six-line hexagram!

Trigram itself is 20mm wide by 9.5mm high; combined hexagram is 20x20mm.

This pendant shows the trigram Chen, which represents the active element of Thunder in the I Ching.
Combine it with an upper trigram (sold separately) to complete a six-line hexagram!

Combined hexagram is 20x20mm.