MyGadgetLife
Designs by mygadgetlife
We found 11 products by mygadgetlife
by
mygadgetlife
An abstraction of the design of the popular tablet device, this little pendant shares the themes of curves and aspect ratio. Plus, my wife likes it ;)
by
mygadgetlife
Eggbot - Like Robby the Robot, but his head is an egg!
Eggbot takes his inspiration from the mechanical marvel that is Robby the Robot from the 1956 science fiction classic, Forbidden Planet.
Able to serve up an egg in English, he's at your disposal with 187 other languages along with their various dialects and sub-tongues.
Note that Eggbot is safe for food, however the unglazed base is slightly porous, so he should be washed only in warm soapy water, not the dishwasher.
Eggbot takes his inspiration from the mechanical marvel that is Robby the Robot from the 1956 science fiction classic, Forbidden Planet.
Able to serve up an egg in English, he's at your disposal with 187 other languages along with their various dialects and sub-tongues.
Note that Eggbot is safe for food, however the unglazed base is slightly porous, so he should be washed only in warm soapy water, not the dishwasher.
by
mygadgetlife
Inspired by M. C. Escher's 1943 Lithograph, Reptiles, this lizard is constructed from as few polygons as possible.
Apertures on the reverse allow the threading of 1-2mm leather cord.
This item can be tessellated with the coloured Strong & Flexible version, although a bit of filing of the nylon material may be required to ensure a good fit.
by
mygadgetlife
Inspired by M. C. Escher's 1943 Lithograph, Reptiles. Multiple units can be tessellated together - there is a small (1mm) loop on the reverse to allow it to be used as a pendant.
by
mygadgetlife
This little case was designed to keep my earbuds separate from everything else in my gadget bag.
The hex lattice design is strong and lightweight, and the two parts fit neatly together.
If you are considering purchasing this item, please understand there are some things you need to do to make the box complete.
The lid is fastened using tiny neodymium magnets - 2 for each of the lid and base. The recesses are designed to hold 3mm deep by 4mm diameter magnets.
I purchase my magnets from first4magnets.com here in the UK.
The magnets are then mounted in the recesses using superglue. Particular attention should be paid to the polarity of the magnets.
It doesn't need said, but please be extra careful when working with superglue. In addition, if handling small, powerful magnets, please observe the safety instructions that accompany any order you receive.
The hex lattice design is strong and lightweight, and the two parts fit neatly together.
If you are considering purchasing this item, please understand there are some things you need to do to make the box complete.
The lid is fastened using tiny neodymium magnets - 2 for each of the lid and base. The recesses are designed to hold 3mm deep by 4mm diameter magnets.
I purchase my magnets from first4magnets.com here in the UK.
The magnets are then mounted in the recesses using superglue. Particular attention should be paid to the polarity of the magnets.
It doesn't need said, but please be extra careful when working with superglue. In addition, if handling small, powerful magnets, please observe the safety instructions that accompany any order you receive.
by
mygadgetlife
Forget the dull old building pass holder you carry with you today, go post-modern and get yourself a Portal inspired badge carrier instead!
Designed to hold a standard credit card sized ID card.
Designed to hold a standard credit card sized ID card.
by
mygadgetlife
Taking inspiration from the movie 'Prometheus', this little vase represents a partially open ampule, revealing... who knows what kind of alien goo!
Note that the manufacturing process is unable to glaze deep recesses in ceramic objects, therefore making this item unsuitable for holding liquids.
by
mygadgetlife
Pogoframe takes it's name from the instant, inkless print system introduced by Polaroid, and of course, it's modelled on the classic white iMac. It even has a tiny replica of the iMac aluminium 'foot' for a stand.
Designed to take 'Zink' pogo prints directly, it will accommodate any picture trimmed to 50x76mm.
Pogoframe comes in two parts, the stand and the frame, and are easily clipped together.
Designed to take 'Zink' pogo prints directly, it will accommodate any picture trimmed to 50x76mm.
Pogoframe comes in two parts, the stand and the frame, and are easily clipped together.
by
mygadgetlife
Made with Shapeways Image Popper
I was playing around with the idea of flow - particularly the image of magnetic tape bundling on top of itself.
The pendant looks like it might be flexible or springy - in fact it's quite rigid.
It has no 'top' and can be hung on a cord in any fashion.
I was playing around with the idea of flow - particularly the image of magnetic tape bundling on top of itself.
The pendant looks like it might be flexible or springy - in fact it's quite rigid.
It has no 'top' and can be hung on a cord in any fashion.
Shop Details
mygadgetlife is a small collection of models I've created in my spare time purely out of my interests in technology, design, popular culture and 3D printing. All models are created using free tools Blender and Sketchup.
Thanks for visiting - Steven
Expertise
- Designer
- Maker
