Mineways

Designs by erich666
Contact Designer

We found 110 products by erich666

Per Page: 12 36   View: Grid | List
Unicorn Meditation
by erich666
 
(0)  
  •  
From: $13.58
 
Vox Arbolis
by erich666
Not for sale, because the train lines in the model are unlikely to print - unsupported, they'd probably snap off during cleaning. This model would ...
 
(0)  
  •  
Downloadable
 
Deku Tree
by erich666
One for khelvig
 
(1)  
  •  
From: $64.88
 
Mother Arbol
by erich666
Might even print OK.
 
(0)  
  •  
From: $31.87
 
Dark Tower
by erich666
 
(1)  
  •  
From: $14.29
 
Creeper
by erich666
From Alexander Boden, a cute little model. Every Minecraft shop needs a creeper! I just had to charge a $0.50 markup on this model (all other model...
 
(1)  
  •  
From: $6.66
 
Regloh's Tower
by erich666
Regloh's tower in Vokselia. More important to me, it proved that umlauted characters can be accepted by Shapeways' uploader.
 
(0)  
  •  
From: $13.38
 
Antenna in white
by erich666
The antenna's struts are too thin at 0.7 mm/block for Shapeways to risk printing. This is a 1.4 mm/block version - too small for color printing, bu...
 
(0)  
  •  
From: $28.70
 
Chain Doku High
by erich666
3mm/block, using the Doku High terrain.png file. Just another texture variant, not sure I'll ever print it.
 
(1)  
  •  
From: $11.11
 
Chain Glimmar
by erich666
I don't know if I'll ever print this one, but it's the chain model using the Glimmar texture pack (tres steampunk).
 
(0)  
  •  
From: $11.11
 
Chain default
by erich666
3mm/block, so it should be strong enough. This uses the default Minecraft terrain.png texture, unaltered. I want to see if textures are printed fuz...
 
(0)  
  •  
From: $11.11
 
Small Bowl
by erich666
From here, a model by Nefashu, http://www.planetminecraft.com/project/minecraft-world-in-a-bowl/, exported with Mineways at an affordable 1 mm/bloc...
 
(1)  
  •  
From: $14.92
 
Bowl
by erich666
From here, a model by Nefashu, http://www.planetminecraft.com/project/minecraft-world-in-a-bowl/, at a safe (but expensive) 2 mm/block. Note that t...
 
(1)  
  •  
From: $82.29
 
CrazyCake's Lab
by erich666
CrazyCake's lab, with his elevator and other experiments. The redstone export looks pretty good at this point, though of course torches are too thi...
 
(0)  
  •  
From: $20.55
 
Hollow Mountain
by erich666
The inside of much of Hollow Mountain. Theoretically this one could print, though there are some helical spires to the left that look pretty fragile.
 
(0)  
  •  
From: $81.81
 
CrazyCake's Lock
by erich666
The lower floor of the lock mechanism. Not for sale, as there are a lot of thin hanging walkways and wire paths that would undoubtedly break off if...
 
(1)  
  •  
Downloadable
 
Mountain City from Squid Server
by erich666
At 1 mm/block, with trees removed (they'll snap off), made with Mineways. From this world, down south ("east"): http://www.minecraftworldmap.com/wo...
 
(0)  
  •  
From: $93.00
 
Eiffel w/Glimmar
by erich666
Textured, using the Glimmar Steampunk texture pack, http://bit.ly/yh3ZWU. The latticework in this texture pack gives the model a more real feel. If...
 
(0)  
  •  
From: $25.64
 
Teapot Other Half
by erich666
The other half of the model here: http://www.shapeways.com/model/415952/teapot_cutaway.html?gid=ug
 
(0)  
  •  
From: $30.68
 
Crazy Music
by erich666
Not a thrilling model, just a piece of my rollercoaster and the mad music generator. Done at 2.5 mm/block in hopes that the textures are sharper an...
 
(0)  
  •  
From: $29.36
 
X the Unknown Part 2
by erich666
Other half of this model: http://www.shapeways.com/model/419361/x_the_unknown_cutaway.html?gid=ug
 
(0)  
  •  
From: $16.10
 
pmin's bridge
by erich666
pmin's bridge in Vokselia.
 
(0)  
  •  
From: $24.80
 
Mushroom Village - Tiny 0.25 mm
by erich666
A tiny version of the Mushroom Village (1.5" wide!), built in Minecraft by Team Atlas, exported with Mineways. This printed out great. Also see the...
 
(2)  
  •  
From: $7.76
 
Toadstool Tower Tiny 1 mm
by erich666
From this build by Cyprezz, exported with Mineways from Minecraft. Each block is 1 mm on a side. The "lesser blocks" feature is off. It printed out...
 
(0)  
  •  
From: $9.07
 
Medieval Buildings mini
by erich666
From http://www.planetminecraft.com/project/deerassassins-medieval-building-pack/, sold at no profit to me. As usual, exported with Mineways. This ...
 
(0)  
  •  
Downloadable
 
Mushroom Village - Small 0.5 mm
by erich666
A smaller version of the Mushroom Village (3" wide!), built in Minecraft by Team Atlas, exported with Mineways. I haven't tried to print this one o...
 
(2)  
  •  
From: $36.13
 
Massive Spawn Tower
by erich666
1.7 mm/block (any larger and the thing won't fit in the printer), I like to think it would hold up to printing. A very tall model, 13 inches high, ...
 
(0)  
  •  
From: $653.27
 
Temple of Notch 1 mm
by erich666
Exported from Minecraft using Mineways, from this model - printed at 1 mm/block so that it's cheap. I sent Notch a copy (and credited _disco, the ...
 
(0)  
  •  
From: $13.80
 
Castle Lividus of Aeritus 1
by erich666
From http://www.planetminecraft.com/project/castle-lividus/, I exported using Mineways just to see if this would print OK. I'm not making any money...
 
(0)  
  •  
From: $70.31
 
Solamar V52 2mm
by erich666
This is a 2 mm / block version of Solamar. So, the photo here is the 3 mm version, which you can buy here: http://www.shapeways.com/model/740800/so...
 
(1)  
  •  
From: $19.32
 
Medieval Buildings 3
by erich666
From http://www.planetminecraft.com/project/deerassassins-medieval-building-pack/, sold at no profit. As usual, exported with Mineways.
 
(0)  
  •  
From: $57.92
 
NyanNew
by erich666
Ariock sent this test file for solid color VRML export. Though the preview is a bit wrong (Shapeways has a limit of 16 solid colors in their previe...
 
(0)  
  •  
Downloadable
 
Curse 2 mm
by erich666
The Curse logo, as a test.
 
(0)  
  •  
From: $72.75
 
Mushroom Village
by erich666
Mushroom Village, built in Minecraft by Team Atlas, exported with Mineways. See it in a video. I've made more affordable small and tiny versions.
 
(1)  
  •  
From: $249.97
 
Sword 4 mm textured
by erich666
Made by someone at the Somerville Mini Maker Faire, see http://www.flickr.com/photos/11998354@N07/8087946893/in/set-72157631771270566/
 
(0)  
  •  
From: $6.55
 
Medieval Buildings 2
by erich666
From http://www.planetminecraft.com/project/deerassassins-medieval-building-pack/, sold at no profit. As usual, exported with Mineways.
 
(0)  
  •  
From: $44.46
 
Shop Details
Models made in Minecraft (http://minecraft.net) and exported using the free Mineways program (http://mineways.com). Non-profit shop, all models downloadable - enjoy!