Michiel Cornelissen
Designs by MichielCornelissen
We found 21 products by MichielCornelissen
by
MichielCornelissen
This project makes use of the intricate geometries and flexible behaviours that are possible with 3d-printed polyamide - holding 111 five-eurocent coins firmly in place to create a stunning necklace.
E 5.55 is currently available as a DIY project. Start saving coins now - it’s half the fun. Alternatively, many banks can provide you with those rolls of 5 eurocent coins that you need, at a small cost.
A fully assembled version of E 5.55 will be available from michielcornelissen.com soon. Mail me at michiel(at)michielcornelissen(dot(com for wholesale possibilities.
Copper can oxidize and become darker over time - which can actually give a great look. If you prefer lighter, shinier coins, there’s an easy - and fun! - way to clean them.
Snap the coins out of the necklace, and submerge them in vinegar (you can add table salt, too) for a few minutes. Stir well, to make sure plenty of vinegar gets everywhere. Rinse the coins in hot water, and dry them. It’s magic.
The necklace itself can be cleaned with water and soap and even dish-washed, after removing the coins.
Each product ordered is individually manufactured, just for you. If you are new to the Shapeways site: to order, you'll be asked to create an account (it's easy; you can even log in with Facebook or Twitter). Product ships in basic Shapeways packaging. For more information about my work, visit www.michielcornelissen.com; if you have any feedback or questions on this item, please feel free to contact me directly at michiel(at)michielcornelissen(dot)com. If you like, follow me on twitter @michiel_ontwerp.
by
MichielCornelissen
CableGuy is currently not available through the Shapeways site. My new product The Wrap, a handy cable winder for the European iPhone charger, can be found here.
CableGuy - cable winder and clip for Apple earphones
Many of us are familiar with two little issues related to the earphones we use with our iPhones and iPods. First, what do you do with ‘m when you’re not using them; and second, where do they go when you take out your buds for a few seconds.
CableGuy solves both of these problems for the Apple earphones that our iGadgets come with. The earbuds and plug find a home in the slots in CableGuy, while the cable can be wound neatly (or not so neatly, if you prefer) around it - making cable spaghetti a thing of the past.
But that’s not all. Clip it to your t-shirt, shirt pocket or bag, and CableGuy keeps your earphones from dropping to the floor when you’re on pause, using either the build-in cable clip or the earbud-fitting slots.
CableGuy - cable winder and clip for Apple earphones
Many of us are familiar with two little issues related to the earphones we use with our iPhones and iPods. First, what do you do with ‘m when you’re not using them; and second, where do they go when you take out your buds for a few seconds.
CableGuy solves both of these problems for the Apple earphones that our iGadgets come with. The earbuds and plug find a home in the slots in CableGuy, while the cable can be wound neatly (or not so neatly, if you prefer) around it - making cable spaghetti a thing of the past.
But that’s not all. Clip it to your t-shirt, shirt pocket or bag, and CableGuy keeps your earphones from dropping to the floor when you’re on pause, using either the build-in cable clip or the earbud-fitting slots.
by
MichielCornelissen
It's a cute little bird, but there's more to it. Merry Bird is an example of a product that can only be manufactured with 3d-printing technology. ?Take a close look: the bird and its hinged (!) swing are printed right inside the cage - no post-production assembly is necessary.
Originally designed as a Christmas ornament, Merry Bird looks good enough to display all year round.
Merry Bird is also available in design stores worldwide through designlabel Soonsalon; mail Sheila for information on the nearest shop to buy, and wholesale options.
by
MichielCornelissen
Both a tribute to ubiquitous, and lovely, hexagonal colour pencils, and a representation of what was coined by Joris Peels as 'combinatory manufacturing'.
Combine the connector piece with any set of 36 standard hexagonal pencils of about 7.0 mm cross section (measured at the smallest diameter). These types of sets are available around the world from many department stores and art supply stores - I’ve seen good sets for as little as 5 euro.
Examples of pencils that fit are Stabilo Aquacolor 1600, and Caran d’Ache Prismalo I, but there are many more. I’ve recently heard that in the US, Prismacolor Verithin Colored Pencils (available from Amazon and others) work well. Normal black pencils often have the same size and shape and can be used too.
If you are new to the Shapeways website: to order you will be asked to create an account (it's easy). Assembly may leave slight marks on pencils. For more information on this or other products, please visit www.michielcornelissen.com.
Combine the connector piece with any set of 36 standard hexagonal pencils of about 7.0 mm cross section (measured at the smallest diameter). These types of sets are available around the world from many department stores and art supply stores - I’ve seen good sets for as little as 5 euro.
Examples of pencils that fit are Stabilo Aquacolor 1600, and Caran d’Ache Prismalo I, but there are many more. I’ve recently heard that in the US, Prismacolor Verithin Colored Pencils (available from Amazon and others) work well. Normal black pencils often have the same size and shape and can be used too.
If you are new to the Shapeways website: to order you will be asked to create an account (it's easy). Assembly may leave slight marks on pencils. For more information on this or other products, please visit www.michielcornelissen.com.
by
MichielCornelissen
Important notice: a lot of people have been very happy with this product, but, as can be read in some of the comments below, it's clear that this design is right on the edge of what Shapeways can produce to the right quality at this moment. If you buy it, there's a risk of having a less then perfect fit, colors can be different from what you see on the screen, and, depending on how you use your phone as well as the tolerances of the case, it has been reported that the polyamide material can give a sort of polishing/scratching effect on the metal rim of the phone (you can find descriptions online of how to remove these kind of blemishes, but it may still be annoying).
Shapeways has, in my experience, been very good with customer service on this item, so they'll be happy to either return your money or provide a new product if you would be one of the unlucky ones; but it's up to you if you want to run the risk that you may have to go through this process.
Essential protection for iPhone 4S and iPhone 4
Even though 4-4 may be the worlds lightest and smallest iPhone 4 case, it still provides great protection to the vulnerable edges of the iPhones' front and back covers - while all controls and connections remain accessible. Its slightly protruding profile helps prevent protect the glass when laying your phone down; using 4-4 can also help to avoid signal loss problems.
This bumper-style case may be combined with commercially available screen protectors. 4-4 is manufactured from tough and durable 3d printed polyamide; it has a slightly textured surface that gives you great grip on your phone. Available in white, black and limited edition colors - note that in white, the 3d printed material may get dirty more quickly - but you can (seriously!) dishwash this product, so that shouldn't be too much of a problem. The 4-4 case is designed to have a tight fit around for iPhone. To put the iPhone in the case, or take it out, start at one of the bottom corners, where there are no buttons. Colors in the images above are for reference only; please check under 'select material' to get the most up-to-date preview of currently available product colors. Product is shipped in basic Shapeways packaging.
4-4 fits the GSM and CDMA/Verizon versions of iPhone 4, as well as the new iPhone 4S.
A two pack of 4-4's in the same color is available at reduced prices here.
You can have a look at all the products in my shop here. Consider buying 4-4 together with The Wrap, a handy cable winder for the European iPhone charger.
If you have any questions or feedback on this product, please feel free to contact me directly via michiel(at)michielcornelissen(dot)com.
Shapeways has, in my experience, been very good with customer service on this item, so they'll be happy to either return your money or provide a new product if you would be one of the unlucky ones; but it's up to you if you want to run the risk that you may have to go through this process.
Essential protection for iPhone 4S and iPhone 4
Even though 4-4 may be the worlds lightest and smallest iPhone 4 case, it still provides great protection to the vulnerable edges of the iPhones' front and back covers - while all controls and connections remain accessible. Its slightly protruding profile helps prevent protect the glass when laying your phone down; using 4-4 can also help to avoid signal loss problems.
This bumper-style case may be combined with commercially available screen protectors. 4-4 is manufactured from tough and durable 3d printed polyamide; it has a slightly textured surface that gives you great grip on your phone. Available in white, black and limited edition colors - note that in white, the 3d printed material may get dirty more quickly - but you can (seriously!) dishwash this product, so that shouldn't be too much of a problem. The 4-4 case is designed to have a tight fit around for iPhone. To put the iPhone in the case, or take it out, start at one of the bottom corners, where there are no buttons. Colors in the images above are for reference only; please check under 'select material' to get the most up-to-date preview of currently available product colors. Product is shipped in basic Shapeways packaging.
4-4 fits the GSM and CDMA/Verizon versions of iPhone 4, as well as the new iPhone 4S.
A two pack of 4-4's in the same color is available at reduced prices here.
You can have a look at all the products in my shop here. Consider buying 4-4 together with The Wrap, a handy cable winder for the European iPhone charger.
If you have any questions or feedback on this product, please feel free to contact me directly via michiel(at)michielcornelissen(dot)com.
by
MichielCornelissen
The product at this page is the PadFoot model that fits perfectly to iPad 2 as well as the 3d and 4th generation iPad. For PadFoot for iPad 1, go here.
PadFoot, the popular viewing stand for iPad, is now available for iPad 2 and the 3d and 4th generation iPad.
PadFoot clips to the corner of your iPad and will securely stand it upright in both landscape and portrait mode. It’s great for watching movies, clips and slideshows, for making FaceTime calls, as well as for use in presentations and (shop) displays.
At just 10 grams, PadFoot is now even lighter and smaller than its predecessor, with an increased viewing angle for even more viewing comfort - while it’s as stable and sturdy as ever.
Price information
The prices of PadFoot have been reduced by up to 20%. If you like, you can save shipping costs by combining this product with another product, like the ones from my shop; or just browse the galleries. A wholesale pack of 4 PadFoots, at up to 30% lower prices, is available here.
General information
PadFoot is manufactured in tough but lightweight, 3d printed polyamide with a fine surface texture. Check the materials section of this website for more information. Colors are seasonal; current availability is shown at the bottom of this page - this may be different from the colors shown in the images above. Each product ordered is individually manufactured, just for you. If you are new to the Shapeways site: to order, you'll be asked to create an account (it's easy; you can even log in with Facebook or Twitter).
It's best to use PadFoot on a stable and horizontal surface. Always make sure that your iPad is placed all the way into the opening in PadFoot; resting the iPad on one of its two edges without buttons. PadFoot will only work if your iPad has no cover on it. Product ships in basic Shapeways packaging. For more information, visit www.michielcornelissen.com; if you have any feedback or questions on this item, please feel free to contact me directly at michiel (at) michielcornelissen.com.
Some of the reactions on PadFoot, when it was introduced:
“PadFoot - Finally an iPad stand I can settle on. The iPad stands up perfectly, and there is absolutely no wobble or shake... PadFoot is also absolutely great to watch movies on the iPad...”
smokingapples.com
“... I was surprised by how small and lightweight it was... the PadFoot is extremely portable... PadFoot will hold the iPad securely at an angle perfect for viewing slide shows or videos.”
the-gadgeteer.com
“This Little iPad Stand Can Still Do a Lot of Standing... The PadFoot does the job and stays out of the way.”
gizmodo.com
PadFoot: one of fastcodesign’s most wanted products...
fastcodesign.com
“... I think the PadFoot... is just the perfect partner for the iPad”
gizmodiva.com
“ Simple yet adorable: The PadFoot iPad stand. At first, I thought the iPad’s inherent lack of stand was a flaw... Now I’m kind of happy that the tablet didn’t come with one. Otherwise, we wouldn’t have cute little items like this...”
todaysiphone.com
“... the Padfoot, a minuscule, efficient iPad stand that is beautiful in its simplicity.”
freshbump.com
“We’ve seen quite a few iPad stands since it hit the market, but the Padfoot by Dutch designer Michiel Cornelissen is just a bit better than what I’ve seen so far... Perfect!”
minimalissimo.com
“Padfoot ist einfach und genial.”
stilsucht.de
Padfoot on NOTCOT
notcot.org
“Received my PadFoot. Works great!”
Robert, New York
...bought a PadFoot... Best iPad accessory ever! You won’t be sorry, it is so light... I love it.
‘xultar’
“Just got my beautifully minimal PadFoot iPad stand from Michiel Cornelissen. Nice!”
‘mr_phillip’, Scotland
“I’ve bought many accessories for iPad, but PadFoot is by far the most useful one I’ve come across. Simple, qualitative and ingenious.”
Mario, The Netherlands
PadFoot, the popular viewing stand for iPad, is now available for iPad 2 and the 3d and 4th generation iPad.
PadFoot clips to the corner of your iPad and will securely stand it upright in both landscape and portrait mode. It’s great for watching movies, clips and slideshows, for making FaceTime calls, as well as for use in presentations and (shop) displays.
At just 10 grams, PadFoot is now even lighter and smaller than its predecessor, with an increased viewing angle for even more viewing comfort - while it’s as stable and sturdy as ever.
Price information
The prices of PadFoot have been reduced by up to 20%. If you like, you can save shipping costs by combining this product with another product, like the ones from my shop; or just browse the galleries. A wholesale pack of 4 PadFoots, at up to 30% lower prices, is available here.
General information
PadFoot is manufactured in tough but lightweight, 3d printed polyamide with a fine surface texture. Check the materials section of this website for more information. Colors are seasonal; current availability is shown at the bottom of this page - this may be different from the colors shown in the images above. Each product ordered is individually manufactured, just for you. If you are new to the Shapeways site: to order, you'll be asked to create an account (it's easy; you can even log in with Facebook or Twitter).
It's best to use PadFoot on a stable and horizontal surface. Always make sure that your iPad is placed all the way into the opening in PadFoot; resting the iPad on one of its two edges without buttons. PadFoot will only work if your iPad has no cover on it. Product ships in basic Shapeways packaging. For more information, visit www.michielcornelissen.com; if you have any feedback or questions on this item, please feel free to contact me directly at michiel (at) michielcornelissen.com.
Some of the reactions on PadFoot, when it was introduced:
“PadFoot - Finally an iPad stand I can settle on. The iPad stands up perfectly, and there is absolutely no wobble or shake... PadFoot is also absolutely great to watch movies on the iPad...”
smokingapples.com
“... I was surprised by how small and lightweight it was... the PadFoot is extremely portable... PadFoot will hold the iPad securely at an angle perfect for viewing slide shows or videos.”
the-gadgeteer.com
“This Little iPad Stand Can Still Do a Lot of Standing... The PadFoot does the job and stays out of the way.”
gizmodo.com
PadFoot: one of fastcodesign’s most wanted products...
fastcodesign.com
“... I think the PadFoot... is just the perfect partner for the iPad”
gizmodiva.com
“ Simple yet adorable: The PadFoot iPad stand. At first, I thought the iPad’s inherent lack of stand was a flaw... Now I’m kind of happy that the tablet didn’t come with one. Otherwise, we wouldn’t have cute little items like this...”
todaysiphone.com
“... the Padfoot, a minuscule, efficient iPad stand that is beautiful in its simplicity.”
freshbump.com
“We’ve seen quite a few iPad stands since it hit the market, but the Padfoot by Dutch designer Michiel Cornelissen is just a bit better than what I’ve seen so far... Perfect!”
minimalissimo.com
“Padfoot ist einfach und genial.”
stilsucht.de
Padfoot on NOTCOT
notcot.org
“Received my PadFoot. Works great!”
Robert, New York
...bought a PadFoot... Best iPad accessory ever! You won’t be sorry, it is so light... I love it.
‘xultar’
“Just got my beautifully minimal PadFoot iPad stand from Michiel Cornelissen. Nice!”
‘mr_phillip’, Scotland
“I’ve bought many accessories for iPad, but PadFoot is by far the most useful one I’ve come across. Simple, qualitative and ingenious.”
Mario, The Netherlands
by
MichielCornelissen
Don’t let unruly wires get between you and your music. Pod à porter is the easiest way to wear your music, and it’s now available for the iPod shuffle 4th generation.
Manufactured from tough but flexible, 3D-printed polyamide, Pod à porter is ultralight and has a finely textured surface finish; each ordered product is manufactured just for you. It fits the iPod shuffle 4th generation and its earbuds, leaving all controls accessible. It also works with other Apple earphones, including ones with a built-in remote control - make sure the plug is the same shape and size as the 4th generation shuffle's.
If you're new to the Shapeways site: to order, you'll be asked to create an account; you can sign in with twitter or facebook. Available in black, and limited edition colors shown below; check the support/materials section of this website for more information. Pod à porter is great for walking, strolling, commuting and many other activities, but it has not been specifically designed or tested for use during work-outs or sports, so it may not be suitable for your particular type of exercise. Product is shipped in basic Shapeways packaging.
Assembly is easy: just run the headphone wire through the product, and attach the Ipod shuffle. Have a look here for some images. If you have any feedback or questions on this item, please feel free to contact me directly through michiel-at-michielcornelissen-dot-com.
Some of the mentions of Pod à porter when it was originally released:
Wear your shuffle and nothing else...
gizmodo.com
Pod à porter, a 3d-printed iPod shuffle necklace
wired.com
Wanted: the cleverest way to wear an iPod shuffle
fastcodesign.com
Very smart.
joshspear.com
mocoloco.com
notcot.org
ilounge.com
design-milk.com
NY Times mentions Pod å`porter!
nytimes.com
Manufactured from tough but flexible, 3D-printed polyamide, Pod à porter is ultralight and has a finely textured surface finish; each ordered product is manufactured just for you. It fits the iPod shuffle 4th generation and its earbuds, leaving all controls accessible. It also works with other Apple earphones, including ones with a built-in remote control - make sure the plug is the same shape and size as the 4th generation shuffle's.
If you're new to the Shapeways site: to order, you'll be asked to create an account; you can sign in with twitter or facebook. Available in black, and limited edition colors shown below; check the support/materials section of this website for more information. Pod à porter is great for walking, strolling, commuting and many other activities, but it has not been specifically designed or tested for use during work-outs or sports, so it may not be suitable for your particular type of exercise. Product is shipped in basic Shapeways packaging.
Assembly is easy: just run the headphone wire through the product, and attach the Ipod shuffle. Have a look here for some images. If you have any feedback or questions on this item, please feel free to contact me directly through michiel-at-michielcornelissen-dot-com.
Some of the mentions of Pod à porter when it was originally released:
Wear your shuffle and nothing else...
gizmodo.com
Pod à porter, a 3d-printed iPod shuffle necklace
wired.com
Wanted: the cleverest way to wear an iPod shuffle
fastcodesign.com
Very smart.
joshspear.com
mocoloco.com
notcot.org
ilounge.com
design-milk.com
NY Times mentions Pod å`porter!
nytimes.com
by
MichielCornelissen
KXX is a multifunctional light, based on the traditional Afro-Brazilian caxixi instrument. The images show the result of my cooperation wiith capoeirista and artisan Cabral Elastico from Recife, Brazil, using a combination of Shapeways-printed nylon parts and woven natural fibers.
KXX is not for sale yet; I'm hoping to be able to bring this product to retail channels through a design and/or fairtrade brand in the near future.
For more information on this project, please visit my website.
KXX is not for sale yet; I'm hoping to be able to bring this product to retail channels through a design and/or fairtrade brand in the near future.
For more information on this project, please visit my website.
by
MichielCornelissen
Using 30 standard-sized pencils, and this kit, you can create an icosahedron-shaped object of about 38 cm or 15 inch in diameter. Use it as a cool lampshade, or just as fun and educational object to have around.
Fits standard hexagonal (colour) pencils of about 7.0 mm cross section - measured at the smallest diameter. Any length of the pencils will work, as long as they're all the same.
If you are new to the Shapeways website: to order you will be asked to create an account (it's easy).
Please note that the available colours are subject to what Shapeways offers, and may be different from those shown in the images here. Please refer to the support section for available colors. Assembly may leave slight indents on pencils.
Fits standard hexagonal (colour) pencils of about 7.0 mm cross section - measured at the smallest diameter. Any length of the pencils will work, as long as they're all the same.
If you are new to the Shapeways website: to order you will be asked to create an account (it's easy).
Please note that the available colours are subject to what Shapeways offers, and may be different from those shown in the images here. Please refer to the support section for available colors. Assembly may leave slight indents on pencils.
by
MichielCornelissen
Tool, symbol or both?
The bits on this pendant are based on actual bit sizes - including an IKEA standard tool - so 'a bit cross' can be used for light jobs. Just remember the steel isn't tempered like 'real' tool bits and tolerances may vary.
I recommend using it with a red leather cord of about 78 cm/ 31 inch.
If you are new to the Shapeways website: to order you will be asked to create an account (it's easy).
The bits on this pendant are based on actual bit sizes - including an IKEA standard tool - so 'a bit cross' can be used for light jobs. Just remember the steel isn't tempered like 'real' tool bits and tolerances may vary.
I recommend using it with a red leather cord of about 78 cm/ 31 inch.
If you are new to the Shapeways website: to order you will be asked to create an account (it's easy).
by
MichielCornelissen
Happy Bird jewelry is now being sold in many design stores around the world, including the New York MoMA (Museum of Modern Art).
Products from the Happy Bird series are available in M and XL sized necklaces, and as earrings; in white, black and limited edition colors. The jewelry is sold complete with beautiful black ball-chain necklaces, nickel free earring hooks and a luxury gift box.
Happy Bird jewelry is currently not available directly through Shapeways, but you can still get one! To locate the nearest store for you, to order one or to enquire about wholesale possibilities, please send an e-mail to info@soonsalon.com.
Products from the Happy Bird series are available in M and XL sized necklaces, and as earrings; in white, black and limited edition colors. The jewelry is sold complete with beautiful black ball-chain necklaces, nickel free earring hooks and a luxury gift box.
Happy Bird jewelry is currently not available directly through Shapeways, but you can still get one! To locate the nearest store for you, to order one or to enquire about wholesale possibilities, please send an e-mail to info@soonsalon.com.
by
MichielCornelissen
Happy Bird jewelry is now being sold in many design stores around the world, including the New York MoMA (Museum of Modern Art).
Products from the Happy Bird series are available in M and XL sized necklaces, and as earrings; in white, black and limited edition colors. The jewelry is sold complete with beautiful black ball-chain necklaces, nickel free earring hooks and a luxury gift box.
Happy Bird jewelry is currently not available directly through Shapeways, but you can still get one! To locate the nearest store for you, to order one or to enquire about wholesale possibilities, please send an e-mail to info@soonsalon.com.
Products from the Happy Bird series are available in M and XL sized necklaces, and as earrings; in white, black and limited edition colors. The jewelry is sold complete with beautiful black ball-chain necklaces, nickel free earring hooks and a luxury gift box.
Happy Bird jewelry is currently not available directly through Shapeways, but you can still get one! To locate the nearest store for you, to order one or to enquire about wholesale possibilities, please send an e-mail to info@soonsalon.com.
Shop Details
Expertise
- Designer
- Product designer
Shop Sections
