Michiel Cornelissen
Designs by MichielCornelissen
We found 21 products by MichielCornelissen
by
MichielCornelissen
Important notice: a lot of people have been very happy with this product, but, by now, it's clear that this design is right on the edge of what Shapeways can produce to the right quality at this moment. If you buy it, there's a risk of having a less then perfect fit, colors can be different from what you see on the screen, and, depending on how you use your phone as well as the tolerances of the case, it has been reported that the polyamide material can give a sort of polishing/scratching effect on the metal rim of the phone (you can find descriptions online of how to remove these kind of blemishes, but it may still be annoying).
Shapeways has, in my experience, been very good with customer service on this item, so they'll be happy to either return your money or provide a new product if you would be one of the unlucky ones; but it's up to you if you want to run the risk that you may have to go through this process.
4-4 protective case for iPhone 4 - two pack
4-4 is one of the smallest, fully functional protective cases for iPhone 4. For a full description of this item, go here.
Order a two-pack of 4-4's in the same color from this page, for only $21.50.
Shapeways has, in my experience, been very good with customer service on this item, so they'll be happy to either return your money or provide a new product if you would be one of the unlucky ones; but it's up to you if you want to run the risk that you may have to go through this process.
4-4 protective case for iPhone 4 - two pack
4-4 is one of the smallest, fully functional protective cases for iPhone 4. For a full description of this item, go here.
Order a two-pack of 4-4's in the same color from this page, for only $21.50.
by
MichielCornelissen
This is the product page for Pod à porter for the 3d generation iPod shuffle. For the 4th generation shuffle, go here.
In the street or at the beach: Pod à porter is the easiest way to wear your music, even when you’re not wearing much.
No more wire-tangle, earphones dangling by your knees, or ripping buds from your ears when you take off your jacket. Fits the 3d generation iPod shuffle and the Apple earphones it ships with; Pod à porter is available in various colors, as shown below.
If you're new to the Shapeways site: to order, you'll be asked to create an account; you can even sign in with twitter or facebook. Each ordered product is 3d-printed especially for you, price includes free worldwide shipping.
Pod à porter is manufactured from tough, but flexible polyamide, with a fine texture. Check the support/materials section of this website for more information. The product has not been specifically designed or tested for use during work-outs or sports, so it may not be suitable for your particular type of exercise. Some powder residue from the 3d printing process may be found on it; if this is the case, it should be easy to clean off. Product is shipped in basic Shapeways packaging.
Check www.michielcornelissen.com for assembly instructions and more information. If you have any feedback or questions on this item, please feel free to contact me directly at michiel@michielcornelissen.com.
Some of the mentions of Pod à porter when it was originally released:
Wear your shuffle and nothing else...
gizmodo.com
Pod à porter, a 3d-printed iPod shuffle necklace
wired.com
Wanted: the cleverest way to wear an iPod shuffle
fastcodesign.com
Very Smart.
joshspear.com
mocoloco.com
notcot.org
ilounge.com
design-milk.com
NY Times mentions Pod å`porter!
nytimes.com
In the street or at the beach: Pod à porter is the easiest way to wear your music, even when you’re not wearing much.
No more wire-tangle, earphones dangling by your knees, or ripping buds from your ears when you take off your jacket. Fits the 3d generation iPod shuffle and the Apple earphones it ships with; Pod à porter is available in various colors, as shown below.
If you're new to the Shapeways site: to order, you'll be asked to create an account; you can even sign in with twitter or facebook. Each ordered product is 3d-printed especially for you, price includes free worldwide shipping.
Pod à porter is manufactured from tough, but flexible polyamide, with a fine texture. Check the support/materials section of this website for more information. The product has not been specifically designed or tested for use during work-outs or sports, so it may not be suitable for your particular type of exercise. Some powder residue from the 3d printing process may be found on it; if this is the case, it should be easy to clean off. Product is shipped in basic Shapeways packaging.
Check www.michielcornelissen.com for assembly instructions and more information. If you have any feedback or questions on this item, please feel free to contact me directly at michiel@michielcornelissen.com.
Some of the mentions of Pod à porter when it was originally released:
Wear your shuffle and nothing else...
gizmodo.com
Pod à porter, a 3d-printed iPod shuffle necklace
wired.com
Wanted: the cleverest way to wear an iPod shuffle
fastcodesign.com
Very Smart.
joshspear.com
mocoloco.com
notcot.org
ilounge.com
design-milk.com
NY Times mentions Pod å`porter!
nytimes.com
by
MichielCornelissen
PadFoot is the popular viewing stand for iPad 2, iPad 3 and iPad 4; for more information, go here.
Buy a wholesale pack of 4 PadFoots at up to 30% lower prices from this page. Product is shipped in basic Shapeways packaging.
Buy a wholesale pack of 4 PadFoots at up to 30% lower prices from this page. Product is shipped in basic Shapeways packaging.
by
MichielCornelissen
This version of PadFoot is compatible with iPad 1. For PadFoot for iPad 2, go here.
PadFoot is a viewing stand for iPad, designed to match the iPad's simplicity and elegance. Great for watching slideshows, clips and movies, as well as for (retail) displays and presentations. PadFoot gives your iPad about 11 degrees backward tilt and can be used in both portrait and landscape mode.
Strong as it is, PadFoot adds less than 15 (!) grams of weight to your bag.
PadFoot is manufactured in tough but lightweight, 3d printed polyamide with a fine surface texture. Check the materials section of this website for more information. Colors are seasonal; current availability is shown at the bottom of this page - this may be different from the colors shown in the images above. Each product ordered is individually manufactured, just for you. If you are new to the Shapeways site: to order, you'll be asked to create an account (it's easy; you can even log in with Facebook or Twitter).
Always make sure you use PadFoot on a stable and horizontal surface, and that your iPad is placed all the way into the opening in PadFoot; resting the iPad on one of its two edges without buttons. Product ships in basic Shapeways packaging. For more information about my work, visit www.michielcornelissen.com; if you have any feedback or questions on this item, please feel free to contact me directly at michiel (at) michielcornelissen.com.
Some of the reactions on PadFoot, when it was introduced:
“PadFoot - Finally an iPad stand I can settle on. The iPad stands up perfectly, and there is absolutely no wobble or shake... PadFoot is also absolutely great to watch movies on the iPad...”
smokingapples.com
“... I was surprised by how small and lightweight it was... the PadFoot is extremely portable... PadFoot will hold the iPad securely at an angle perfect for viewing slide shows or videos.”
the-gadgeteer.com
“This Little iPad Stand Can Still Do a Lot of Standing... The PadFoot does the job and stays out of the way.”
gizmodo.com
PadFoot is one of fastcodesign’s most wanted products of 2010
fastcodesign.com
“... I think the PadFoot... is just the perfect partner for the iPad”
gizmodiva.com
“ Simple yet adorable: The PadFoot iPad stand. At first, I thought the iPad’s inherent lack of stand was a flaw... Now I’m kind of happy that the tablet didn’t come with one. Otherwise, we wouldn’t have cute little items like this...”
todaysiphone.com
“... the Padfoot, a minuscule, efficient iPad stand that is beautiful in its simplicity.”
freshbump.com
“We’ve seen quite a few iPad stands since it hit the market, but the Padfoot by Dutch designer Michiel Cornelissen is just a bit better than what I’ve seen so far... Perfect!”
minimalissimo.com
“Padfoot ist einfach und genial.”
stilsucht.de
Padfoot on NOTCOT
notcot.org
“Received my PadFoot. Works great!”
Robert, New York
...bought a PadFoot... Best iPad accessory ever! You won’t be sorry, it is so light... I love it.
‘xultar’
“Just got my beautifully minimal PadFoot iPad stand from Michiel Cornelissen. Nice!”
‘mr_phillip’, Scotland
“I’ve bought many accessories for iPad, but PadFoot is by far the most useful one I’ve come across. Simple, qualitative and ingenious.”
Mario, The Netherlands
PadFoot is a viewing stand for iPad, designed to match the iPad's simplicity and elegance. Great for watching slideshows, clips and movies, as well as for (retail) displays and presentations. PadFoot gives your iPad about 11 degrees backward tilt and can be used in both portrait and landscape mode.
Strong as it is, PadFoot adds less than 15 (!) grams of weight to your bag.
PadFoot is manufactured in tough but lightweight, 3d printed polyamide with a fine surface texture. Check the materials section of this website for more information. Colors are seasonal; current availability is shown at the bottom of this page - this may be different from the colors shown in the images above. Each product ordered is individually manufactured, just for you. If you are new to the Shapeways site: to order, you'll be asked to create an account (it's easy; you can even log in with Facebook or Twitter).
Always make sure you use PadFoot on a stable and horizontal surface, and that your iPad is placed all the way into the opening in PadFoot; resting the iPad on one of its two edges without buttons. Product ships in basic Shapeways packaging. For more information about my work, visit www.michielcornelissen.com; if you have any feedback or questions on this item, please feel free to contact me directly at michiel (at) michielcornelissen.com.
Some of the reactions on PadFoot, when it was introduced:
“PadFoot - Finally an iPad stand I can settle on. The iPad stands up perfectly, and there is absolutely no wobble or shake... PadFoot is also absolutely great to watch movies on the iPad...”
smokingapples.com
“... I was surprised by how small and lightweight it was... the PadFoot is extremely portable... PadFoot will hold the iPad securely at an angle perfect for viewing slide shows or videos.”
the-gadgeteer.com
“This Little iPad Stand Can Still Do a Lot of Standing... The PadFoot does the job and stays out of the way.”
gizmodo.com
PadFoot is one of fastcodesign’s most wanted products of 2010
fastcodesign.com
“... I think the PadFoot... is just the perfect partner for the iPad”
gizmodiva.com
“ Simple yet adorable: The PadFoot iPad stand. At first, I thought the iPad’s inherent lack of stand was a flaw... Now I’m kind of happy that the tablet didn’t come with one. Otherwise, we wouldn’t have cute little items like this...”
todaysiphone.com
“... the Padfoot, a minuscule, efficient iPad stand that is beautiful in its simplicity.”
freshbump.com
“We’ve seen quite a few iPad stands since it hit the market, but the Padfoot by Dutch designer Michiel Cornelissen is just a bit better than what I’ve seen so far... Perfect!”
minimalissimo.com
“Padfoot ist einfach und genial.”
stilsucht.de
Padfoot on NOTCOT
notcot.org
“Received my PadFoot. Works great!”
Robert, New York
...bought a PadFoot... Best iPad accessory ever! You won’t be sorry, it is so light... I love it.
‘xultar’
“Just got my beautifully minimal PadFoot iPad stand from Michiel Cornelissen. Nice!”
‘mr_phillip’, Scotland
“I’ve bought many accessories for iPad, but PadFoot is by far the most useful one I’ve come across. Simple, qualitative and ingenious.”
Mario, The Netherlands
by
MichielCornelissen
This is a wholesale offer of 3 x Pod à porter at reduced prices. For more information on Pod à porter, check the description in my shop.
by
MichielCornelissen
The Wrap is an accessory that attaches to the USB end of your iPhone charger, transforming it into a handy little cable winder for the charging cord.
This version of The Wrap works with recent US iPhone chargers and USB cables as shown in the images, up to those of iPhone 4 and iPhone 4S - please check before you purchase. There is currently no version of The Wrap available for iPhone 5 cables. It may work with other countries’ iPhone chargers too, but only if the geometry is exactly the same as the US version as shown here.
This product was originally developed for the European version of the iPhone charger - that version can be found here. The Wrap is manufactured in tough but lightweight, 3d printed polyamide with a fine surface texture. Colors may vary - please check in the 'select material' section above for the latest versions. Some powder residue from the printing process may be left on the product; if that's the case, it should be easy to clean off. Product is shipped in standard Shapeways packaging.
You can have a look at all the products in my shop here. Shipping rates are flat, so you could divide them over several products. If you have any feedback or questions on this product, please feel free to e-mail me directly at michiel(at)michielcornelissen(dot)com. If you like, follow me on twitter.
A wholesale offer of 8 units of The Wrap at reduced prices is now available here.
This version of The Wrap works with recent US iPhone chargers and USB cables as shown in the images, up to those of iPhone 4 and iPhone 4S - please check before you purchase. There is currently no version of The Wrap available for iPhone 5 cables. It may work with other countries’ iPhone chargers too, but only if the geometry is exactly the same as the US version as shown here.
This product was originally developed for the European version of the iPhone charger - that version can be found here. The Wrap is manufactured in tough but lightweight, 3d printed polyamide with a fine surface texture. Colors may vary - please check in the 'select material' section above for the latest versions. Some powder residue from the printing process may be left on the product; if that's the case, it should be easy to clean off. Product is shipped in standard Shapeways packaging.
You can have a look at all the products in my shop here. Shipping rates are flat, so you could divide them over several products. If you have any feedback or questions on this product, please feel free to e-mail me directly at michiel(at)michielcornelissen(dot)com. If you like, follow me on twitter.
A wholesale offer of 8 units of The Wrap at reduced prices is now available here.
by
MichielCornelissen
The Wrap - cable winder accessory for European iPhone charger
If you are from Europe and have a recent iPhone, you will probably recognize the charger shown here. You may also have noticed that you can almost wind your USB cable around it - but not quite, frequently resulting in pocket spaghetti.
I realized that one end of the charger is already perfectly fit for the job, and all you really need is the same shape on the other side as well. The Wrap provides just that, clipping securely onto the USB plug.
The Wrap is manufactured in tough but lightweight, 3d printed polyamide with a fine surface texture. Works with recent European iPhone chargers and USB cables as shown in the images, up to iPhone 4 and 4S - please check before you purchase. Does not work with iPhone 5 cables. To save on shipping costs, you may want to consider buying two or more; you know your friends will love you for it. Product is shipped in basic Shapeways packaging. Some powder residue from the 3d printing process may be found on it; if this is the case, it should be easy to clean off.
You can have a look at all the products in my shop here. If you have any questions or feedback on this product, please feel free to contact me directly via michiel(at)michielcornelissen(dot)com, or contact service@shapeways.com. If you like, follow me on twitter.
By popular demand, a US version of The Wrap is now available here.
A wholesale offer of 5 units of The (European) Wrap at reduced prices is now available here.
If you are from Europe and have a recent iPhone, you will probably recognize the charger shown here. You may also have noticed that you can almost wind your USB cable around it - but not quite, frequently resulting in pocket spaghetti.
I realized that one end of the charger is already perfectly fit for the job, and all you really need is the same shape on the other side as well. The Wrap provides just that, clipping securely onto the USB plug.
The Wrap is manufactured in tough but lightweight, 3d printed polyamide with a fine surface texture. Works with recent European iPhone chargers and USB cables as shown in the images, up to iPhone 4 and 4S - please check before you purchase. Does not work with iPhone 5 cables. To save on shipping costs, you may want to consider buying two or more; you know your friends will love you for it. Product is shipped in basic Shapeways packaging. Some powder residue from the 3d printing process may be found on it; if this is the case, it should be easy to clean off.
You can have a look at all the products in my shop here. If you have any questions or feedback on this product, please feel free to contact me directly via michiel(at)michielcornelissen(dot)com, or contact service@shapeways.com. If you like, follow me on twitter.
By popular demand, a US version of The Wrap is now available here.
A wholesale offer of 5 units of The (European) Wrap at reduced prices is now available here.
by
MichielCornelissen
This is a wholesale offer of 8 units of the US version of The Wrap, a handy cable organiser accessory for the iPhone charger, at reduced prices. Note that these products are shipped in basic Shapeways packaging. For more information on The Wrap, go here.
This version works with iPhone chargers and cables up to those of iPhone 4 and 4S. There is no version of The Wrap available for iPhone 5.
This version works with iPhone chargers and cables up to those of iPhone 4 and 4S. There is no version of The Wrap available for iPhone 5.
by
MichielCornelissen
This is a wholesale offer of 5 units of the European version of The Wrap, a handy cable organiser accessory for the iPhone charger, at reduced prices. Note that these products are shipped in basic Shapeways packaging. For more information on The Wrap, go here.
This version works with iPhone chargers and cables up to those of iPhone 4 and 4S. There is currently no version of The Wrap available for iPhone 5 cables.
This version works with iPhone chargers and cables up to those of iPhone 4 and 4S. There is currently no version of The Wrap available for iPhone 5 cables.
Shop Details
Expertise
- Designer
- Product designer
Shop Sections
