MetroTech Machinery

Designs by mihunai
Contact Designer

mihunai is selling 12 products in 1" OD Blade Plugs section

Per Page: 12 36   View: Grid | List
MBPB-A13-TEK
by mihunai
An intricate bladeplug for the windowed saber, this plug is sure give detailed insight into your saber! WARNING: Print in Frosted detail or Frosted Ultra Detail at own risk. May cause blinding when used with High-Power LEDs e.g. Luxeon LED's. Compatible with MBPx-A1x-xxx
 
(0)  
  •  
From: $19.09
 
MBPB-B11-001
by mihunai
Basic style B 1" Base. Use inserts and disks to customise your bladeplug! WARNING: Print in Frosted detail or Frosted Ultra Detail at own risk. May cause blinding when used with High-Power LEDs e.g. Luxeon LED's. Compatible with MBPx-A1x-xxx
 
(0)  
  •  
From: $11.01
 
MBPB-A13-MEK
by mihunai
Here's your chance to show your sabers inner workings! The MECH plug features a detailed 'lens assembly' design. The space in the core can be used to store your personal lightsaber crystal! Recommended for windowed sabers. WARNING: Print in Frosted detail or Frosted Ultra Detail at own risk. May cause blinding when used with High-Power LEDs e.g. Luxeon LED's. Compatible with MBPx-A1x-xxx
 
(0)  
  •  
From: $17.76
 
MBPB-B13-001
by mihunai
Basic style B 1" Base. Use inserts and disks to customise your bladeplug!WARNING: Print in Frosted detail or Frosted Ultra Detail at own risk. May cause blinding when used with High-Power LEDs e.g. Luxeon LED's. Compatible with MBPx-A1x-xxx
 
(0)  
  •  
From: $13.53
 
MBPB-A11-001
by mihunai
Basic style A 1" Base. Use inserts and disks to customise your bladeplug! WARNING: Print in Frosted detail or Frosted Ultra Detail at own risk. May cause blinding when used with High-Power LEDs e.g. Luxeon LED's. Compatible with MBPx-A1x-xxx
 
(0)  
  •  
From: $11.86
 
Reactor Bladeplug
by mihunai
|| METROTECH MACHINERY || A 1" blade plug for your custom saber. This plug features a distinctive reactor look, with various light holes for an interesting light-up effect. You could mount it all the way inside the emitter, or let it stick out a bit for that sci-fi emitter look. The neck could also be decorated with copper wire*, to finish its coil- like appeal. !FOR WINDOWED EMITTERS! If you have a windowed emitter, make sure the slots of this plug DO NOT line up with the windows. These slots were added to keep costs down, and will NOT protect your eyes from the LED. Be sure to check our other designs! http://www.shapeways.com/shops/metrotech =>|| METROTECH MACHINERY ||
 
(0)  
  •  
From: $16.93
 
Aperture Bladeplug Mk II
by mihunai
|| METROTECH MACHINERY || Go old-school with this aperture blade plug! A 1" OD bladeplug featuring an aperture*-shaped opening, with an additional fan like structure inside for some interesting light effects. Not to mention prevent the LED from blinding you... Be sure to check our other designs! http://www.shapeways.com/shops/metrotech || METROTECH MACHINERY || *Aperture is not functional.
 
(0)  
  •  
From: $18.90
 
Ring Bladeplug
by mihunai
|| METROTECH MACHINERY || A 1" blade plug for your custom saber. This particular design features a stacked ring design, held in place by simulated 'armatures'. Underneath each ring there's a cut-out, backlighting the rings for a cool glow. Be sure to check our other designs! http://www.shapeways.com/shops/metrotech || METROTECH MACHINERY ||
 
(0)  
  •  
From: $13.64
 
Key Bladeplug
by mihunai
|| METROTECH MACHINERY || Keep your saber safely locked, with this keyhole bladeplug! Features a fake keyhole. !WARNING! Not suitable for windowed sabers. The various slots are to keep cost down, and WILL NOT PROTECT your eyes. A 1" OD bladeplug for your custom saber. Be sure to check our other designs! http://www.shapeways.com/shops/metrotech || METROTECH MACHINERY ||
 
(0)  
  •  
From: $14.67
 
Industrial Bladeplug
by mihunai
|| METROTECH MACHINERY || Give your saber that industrial look, with this custom bladeplug! Features a grill-like design, with some interesting 'lens assembly' features one the sides, to make it look like an actual saber part. A 1" OD industrial looking bladeplug for your custom sabers. Be sure to check our other designs! http://www.shapeways.com/shops/metrotech || METROTECH MACHINERY ||
 
(0)  
  •  
From: $18.31
 
Piston Bladeplug
by mihunai
|| METROTECH MACHINERY || Pump up your saber, with this piston bladeplug! Features 4 pistons supporting the 'emitter', with a gear-like core. !WARNING! When used in windowed sabers, DO NOT ALIGN the slots with the windows. These slots are to reduce cost and WILL NOT PROTECT your eyes. A 1" OD mechanical looking bladeplug for your custom sabers. Be sure to check our other designs! http://www.shapeways.com/shops/metrotech || METROTECH MACHINERY ||
 
(0)  
  •  
From: $21.10
 
Aperture Bladeplug Closed
by mihunai
|| METROTECH MACHINERY || Get your steampunk on, with this aperture bladeplug! Features a closed aperture design. Steampunk Tip: Print this design in Bronze for that ancient feel! A 1" OD aperture bladeplug for your custom sabers. Be sure to check our other designs! http://www.shapeways.com/shops/metrotech || METROTECH MACHINERY ||
 
(0)  
  •  
From: $14.46
 
Shop Details
Welcome to MetroTech Machinery! Here you will find accessories for your custom saber, such as bladeplugs and kill-keys, and other geeky curiosa. Is there something you'd like to see in our shop, or something you'd like changed in one of our items? Just send a message and we'll get right on it. Happy shopping, and don't forget your towel, -The MetroTech Team

Expertise

  • 3D modeler

Shop Sections